Smittybilt Pivot HD Oversize Tire Carriers

From $249.99

• Smittybilt strong monocoque aluminum construction eliminates tailgate sag with this Jeep spare tire carrier
• Adjustable tire mount with 37 inch maximum tire size
• Increases load carrying capacity to 135 lbs with this Jeep tire carrier
• Forged chrome mounting brackets ? 30% stronger than steel
• Third brake light mount included
• Protective EPDM gaskets included to protect factory finish
• S/B2740-03 optional brackets to mount trail jack
• Maintains the easy single action of opening and closing of the tailgate
• No drilling required - you can maintain OE bumpers, if preferred
• California Residents: WARNING

Smittybilt Defender Roof Racks

From $1,070.99

• Universal application
• Requires vehicle-specific mounting kit
• Textured black powder coat
• 16-gauge fully welded 1 inch round steel tubing
• Welded light tabs and aerodynamic design
• California Residents: WARNING

G2 Axle & Gear Brute Differential Covers

From $112.00

Smittybilt M1 Mesh Grilles

From $104.24

• M1 Black Wire Mesh Grille
• Manufactured out of marine grade 304 stainless steel
• Chrome plated lugs, black powdercoat finish and Smittybilt M1 Logo Badge provides cutting edge look and style
• Robotically welded with no exposed welds for a clean finished look
• Backed by Smittybilt's 5 year finish warranty
• Heavy duty packaging ensures grille will arrive with no damage.
• California Residents: WARNING

Smittybilt M1 Front Bumpers

From $1,399.99

• Two stage matte Black finish powder coat finish
• Manufactured from 3/16 inch & 1/4 inch cold roll steel
• Ultra Bright Driving & Fog Lights
• Solid Mount D-Rings - Welds on the inside and out
• Solid plate center section that wraps the frame horns and lower cross member
• Smittybilt Advantage Warranty - Limited Lifetime Warranty
• California Residents: WARNING

G2 Axle & Gear Replacement Axle Shafts

From $63.24

• High Strength Alloy Steel
• Heat treated
• Big spline options
• Rolled splines
• Wheel studs included
• California Residents: WARNING

Smittybilt G.E.A.R. Tailgate Covers

From $62.99

• Available in 4 colors:2 large storage pouches
• 600 denier polyester with PVC liner
• Interchangeable with PAL/MOLLE pouches
• California Residents: WARNING

G2 Axle & Gear Placer Gold Series Axles

From $104.00

• G/2s new made in the U.S.A. Placer Gold Series axles are an even stronger axle option for Jeep JK Wrangler owners. These new American made axles use high quality 4340 chromoly steel and feature a stronger forging with more material in critical areas.
• California Residents: WARNING

Smittybilt XRC Winch Covers

From $30.99

• Fits 8000 lb to 12000 lb winch
• Black canvas
• Dimensions: 6 inches wide x 10 inches tall x 22 inches long
• California Residents: WARNING

Smittybilt M1 Fender Flares

From $376.19

• Smittybilt's M-1 Fender Flares are custom molded for each application for a great fit right out of the box
• Made with durable and heat resistant, UV-stable acrylic-capped OEM quality ABS keeps their rugged look year after year
• Adds up to 2 inches of extra tire coverage to prevent road debris from hitting side of truck
• Lightly textured OEM matte black finish looks great right out of the box or painted for a custom look
• Quick and easy hassle free, no drill installation requires no cutting or modifications to the your vehicle
• California Residents: WARNING

Smittybilt SRC Front Bumpers

From $299.99

• Two-stage textured matte black powdercoat finish
• 2 tabs to mount lights
• Wide opening allows for winch installation
• 1/4 inch thick custom mounting brackets
• Welded d-ring tabs
• 5-year limited warranty
• California Residents: WARNING

Smittybilt Windshield Channels

From $25.99

• Drill-in and no drill style header
• California Residents: WARNING

Smittybilt D-Ring Shackles

From $13.99

• Cast Steel Construction
• Sold individually
• California Residents: WARNING

Smittybilt SRC Stingray Vented Hoods

From $559.99

• Precision steel construction
• Factory crumple zones retained
• Vent hot gases out of engine bay
• OE hood latch/hood mount fitment
• 0.8mm thick steel with 0.2mm e-coat, ready for paint
• Hood nozzles included
• 8.7mm thick underbody insulation mat
• Smittybilt Advantage Warranty
• California Residents: WARNING

G2 Axle & Gear Dana 30 JK Ring and Pinion Sets

From $131.99

• Dana 30 JK Ring and Pinion Sets
• Forged from 8620 steel
• Tight tolerances for easy setup and to maintain OE noise level specs
• Lapped to give the mating surface a smooth finish to reduce friction that can lead to noise and excessive wear
• California Residents: WARNING

Smittybilt XRC Fender Flares

From $279.99

• 100% steel construction for extra durability
• Black power coated for immediate use and durability or can painted to match your Jeep
• Stream line design to help increase suspension articulation while maintaining the street-ability look
• Less is more when it comes to XRC Fender Flares, where the OE fender does not meet your needs
• CJ, YJ and TJ to be used with Smittybilt corner guards
• California Residents: WARNING

Smittybilt XRC Atlas Rear Bumpers

From $1,119.99

• Smittybilt Wrangler rear bumper is coated in a two-stage textured matte Black finish
• Hitch
• Available with and without Tire carrier
• Smittybilt limited lifetime warranty on this Jeep rear bumper
• California Residents: WARNING

Smittybilt M1 Rear Bumpers

From $1,199.99

• Two Stage Matte Black Finish powder coat Finish - 5 year Limited Warranty
• Manufactured from 3/16 inch & 1/4 inch cold roll steel
• Solid Mount D-Rings Welded on the inside and out
• Smittybilt Advantage Warranty
• California Residents: WARNING

Smittybilt Contractors Truck Bed Racks

From $499.97

• Finished in a textured matte black finish
• Fully Adjustable
• 800 LB Capacity
• Manufactured from .120 wall 2 inch tubing
• Air Deflector for no ambient noise
• Adjustable leg and feet for complete customizations
• Removable center and rear cross bars for extra tall loads
• Built in tie downs to secure just about anything
• Gusseted corners for extra strength and rigidity
• Classic design with enhanced features
• All hardware is gold zinc plated and is rated grade 8
• No drill with supplied J-Hooks or permanently mounted with supplied hardware
• California Residents: WARNING

Smittybilt SRC GEN2 Tubular Doors

From $349.99

• Robust 1.5" 0.090 wall tubular design
• Uses factory striker with our latch
• New upgraded hinges/billet alloy handle and integrated mirror mount
• Added visbility both on - and off-road, opens from in or outside vehicle
• Durable door bumper
• Door straps included
• California Residents: WARNING

G2 Axle & Gear Dana 44 Ring and Pinion Sets

From $118.24

• Dana 44 Ring and Pinion Sets
• Forged from 8620 steel
• Tight tolerances for easy setup and to maintain OE noise level specs
• Lapped to give the mating surface a smooth finish to reduce friction that can lead to noise and excessive wear
• California Residents: WARNING

G2 Axle & Gear Dana 30 Ring and Pinion Sets

From $109.99

• Dana 30 Ring and Pinion Sets
• Forged from 8620 steel
• Tight tolerances for easy setup and to maintain OE noise level specs
• Lapped to give the mating surface a smooth finish to reduce friction that can lead to noise and excessive wear
• California Residents: WARNING

Smittybilt Cloak Extended Mesh Tops

From $74.99

• Black mesh
• Easy install no tools needed
• No header required
• Stays on with hard or soft top installed
• Reduces wind noise
• Installs with heavy duty bungee cords
• UV and mildew resistant
• Durable long lasting PVC coat mesh material
• Reduces the heat and glare of the sun while allowing cool air to flow through
• California Residents: WARNING

Smittybilt Scout Trailer Kit

From $7,039.99

• Additional accessories shown are sold separately
• Removable/adjustable fenders
• BF Goodrich LT265/70R17 All-Terrain T/A KO2 tires mounted on Pro Comp Series 51 Steel Wheels (qty 3)
• 5x5 wheel bolt pattern
• All doors equipped with locking t-handle latches
• 3 main doors with slider drawer system
• S/S sliders with 200 lbs. capacity
• Rear sliders have hold open/closed latches to prevent unwanted movement
• All sliders equipped with hold close latches
• Kitchenette cabinet with locking drawer
• Generator/fridge cabinet with Mesh floor
• Integrated tie down points front and sides. 2 front, 4 each side one on top of main compartment
• Electric brakes with integrated break away brake system
• 7 pin trailer wiring socket
• 2 inch front receiver /hitch mount adaptable to use articulating hitch or pintle hook
• 2 inch rear receiver hitch for mounting accessories
• 2 rear mounted shackle mounts for 3/4 inch shackles
• 2 inch ball coupler included for on-road use ONLY
• For off-road use you must use an articulating style coupler
• Large main compartment with dual sliding floors
• Removable swing-away tongue jack with large all terrain tire