Poison Spyder RockBrawler Rear Bumpers

From $499.99

• The Poison Spyder Rear Stinger Wrangler rear bumper is available in Bare Steel or Black Powder Coat
• 3/16 inch plate steel
• Maximize performance on the toughest trails
• High clearance, multi-faceted design Jeep rear bumper
• California Residents: WARNING

Poison Spyder Crusher Flares

From $599.99

• Poison Spyder Front Crusher Flare kit improves both the aesthetics and durability of your Jeep during your off road adventures
• Crusher Flares are constructed from 1.5 inch X .120 wall DOM tubing in combination with 1/8th and 3/16th high pressure plate steel
• The Crusher Flare kit utilizes stainless countersunk hardware to secure to the Jeeps outer skin and a combination of two heavy duty internal brackets that are coupled to the sub-frame
• Additionally the JK Front Crusher Flare Kit comes with a pair of rubber gaskets that isolates the fender from direct contact with the Jeep paint and body
• The Front Crusher Flare kit comes standard with mounting provisions to replace the factory side marker with an updated LED marker light
• Poison Spyder Front Crusher Flares retain the factory wheel well liner to protect the engine from trail and road debris
• California Residents: WARNING

G2 Axle & Gear Replacement Axle Kits

From $106.39

• Axle upgrade engineered to withstand the additional load of high-torque applications
• Stronger than factory
• Comes with full manufacturer warranty
• California Residents: WARNING

G2 Axle & Gear Master Ring and Pinion Installation Kits

From $109.99

• G2 ring and pinion installation kit
• Includes Timken bearings, ring gear bolts, shims to set pinion and carrier bearing preloads, pinion seal and pinion nut
• California Residents: WARNING

G2 Axle & Gear Wheel Spacers

From $157.49

• CNC-machined T-6061 aluminum alloy
• Corrosion-resistant black anodized finish
• Pre-installed Grade 8 studs (depending on application)
• Limited Lifetime Warranty
• Sold in pairs
• Included: grade 8 studs pressed in (depending on application)

Poison Spyder Inner Fender Kits

From $168.99

• Bare aluminum
• Front and rear
• Made of CNC laser cut aluminum sheet
• Bolt on applicaition
• California Residents: WARNING

G2 Axle & Gear Dana 44 JK Ring and Pinion Sets

From $160.99

• Dana 44 JK Ring and Pinion Sets
• Forged from 8620 steel
• Tight tolerances for easy setup and to maintain OE noise level specs
• Lapped to give the mating surface a smooth finish to reduce friction that can lead to noise and excessive wear
• California Residents: WARNING

Poison Spyder Brawler Lite Front Bumpers

From $799.99

• The RockBrawler™ is fabricated from 3/16 inch steel plate, CNC laser cut and brake-formed for a precise fit.
• The Stinger is made of 1.75 inch X .120 wall DOM tubing.
• The two D-ring shackle mounts are CNC-machined from 1 inch plate steel.
• The integrated winch mount accepts most major manufacturer's winches up to 15,000 lbs.
• Another characteristic of the RockBrawler™ is its amazing tire clearance.
• RockBrawler™ bumpers are shipped as BARE STEEL.
• California Residents: WARNING

G2 Axle & Gear Ring and Pinion Sets

From $1,368.99

• Engineered and manufactured to handle increased load
• Forged from high-strength 8620 Steel
• Precision-machined to OE specifications for perfect mesh
• Tight tolerances ensure easy set up and quiet OE-like operation
• Double-lapped and shot-peened for improved longevity
• Heat-treated for added durability
• Wide application range from
• Full 10-year warranty
• California Residents: WARNING

Poison Spyder Bombshell Differential Covers

From $114.99

• Constructed from thick nodular iron
• Available in either bare steel or black powdercoat finish
• One of the thickest differential covers on the market
• California Residents: WARNING

Poison Spyder Crusher Corners

From $336.99

• Poison Spyder Crusher Corners are laser cut from high strength 3/16 inch plate steel then carefully roll-formed for a perfect fit to your Jeep's body lines
• Standard Crusher Corners come pre-configured with all of our most popular features including wheel opening, provisions for flush-mounted LED taillights (sold separately) and factory fuel filler opening
• All of the bolt holes are countersunk, and the supplied stainless steel flat head cap screws yield a smooth, flat surface to slide over rocks
• Available in Bare Steel or Black Powder Coat,Steel or aluminum, with and without flares and with and without holes for rear lights ther is a fit and style for everybody
• California Residents: WARNING

G2 Axle & Gear Hammer Differential Covers

From $104.99

• G2 aluminum differential covers are designed to not only protect your ring & pinion, they are designed to help cool your gear oil for prolonged bearing life. Made from high strength heat treated aluminum to withstand direct hits, these covers help protect your investment while adding a distinct look to your vehicle.
• California Residents: WARNING

Poison Spyder Rocker Knockers

From $299.99

• Protect your Jeep rocker panels with Poison Spyder Rocker Knockers by cladding them in rugged, high strength 3/16" plate steel armor
• Manufactured to hug the lines of your Wrangler rocker panel perfectly forming a glove-fit with virtually no loss of ground clearance
• Specifically engineered for most Jeep CJ, YJ, TJ and LJ models
• Bolt holes are countersunk for the included stainless steel flat head hardware, which yields a flat, unobstructed surface to slide over obstacles.
• All mounting hardware is included as well as detailed installation instructions.
• California Residents: WARNING

G2 Axle & Gear Brute Differential Covers

From $195.99

Poison Spyder Hood Louvers

From $179.99

• Keep under-hood temperatures cooler by allowing hot air to escape through the vents
• The hood louvers allow for improved airflow into the engine bay helping your radiator and fan operate more efficently
• Crafted from quality, thick gauged aluminum sheet and CNC laser cut
• Light weight and corrosion resistant
• Easy installation (template included)
• Adds durability to the flimsy sheetmetal of most stock hoods
• Available in bare aluminum or black powder coat aluminum with corrosion resistant stainless steel fasteners included
• California Residents: WARNING

G2 Axle & Gear Replacement Axle Shafts

From $114.99

• High Strength Alloy Steel
• Heat treated
• Big spline options
• Rolled splines
• Wheel studs included
• California Residents: WARNING

Poison Spyder BFH Disco Skid Plates

From $108.99

• JK skid plates 3/16" plate steel CNC laser-cut
• Swaybar disconnect armor
• 1 year warranty
• hardware included
• California Residents: WARNING

G2 Axle & Gear Placer Gold Series Axles

From $181.99

• G/2s new made in the U.S.A. Placer Gold Series axles are an even stronger axle option for Jeep JK Wrangler owners. These new American made axles use high quality 4340 chromoly steel and feature a stronger forging with more material in critical areas.
• California Residents: WARNING

G2 Axle & Gear Dana 30 JK Ring and Pinion Sets

From $153.99

• Dana 30 JK Ring and Pinion Sets
• Forged from 8620 steel
• Tight tolerances for easy setup and to maintain OE noise level specs
• Lapped to give the mating surface a smooth finish to reduce friction that can lead to noise and excessive wear
• California Residents: WARNING

Poison Spyder Body Mounted Tire Carriers

From $999.99

• Poison Spyder Jeep Spare Tire Carrier
• Bare steel
• CNC laser cut
• Fit up to 40 inch tire and wheel combo on this Jeep tire carrier
• Mount for Hi-Lift jack
• Includes all mounting hardware
• California Residents: WARNING

Poison Spyder BFH Front Bumpers

From $449.99

• This bumper was literally "Built For the Hammers" with the best ground clearance, tire clearance and approach angle possible.
• It is no wider than the Jeep's frame rails
• CNC laser-cut from a single piece of high strength 3/16 inch plate steel
• The BFH™ bumper features an integrated winch mount and one-piece design.
• At a mere 35 pounds, the BFH™ is among the lightest bumpers on the market.
• Even fully outfitted with Brawler Bar and Heavy Duty Shackle Tabs, the BFH™ weighs only 43 pounds!
• California Residents: WARNING

Poison Spyder Ricochet Rockers

From $399.99

• YJ Rocker Panel guards bulit with the same hardcore toughness as its counterpart the Rocker Knocker
• This rocker is the pinnacle of hardcore body armor protection style and convenience for anyone looking for a jeep rocker panel
• Stout reinforced 5" dimpled plate making this rocker a very effective armor addition
• California Residents: WARNING

Poison Spyder DeFender Front Fenders

From $589.99

• Available in bare steel or bare aluminum
• Retains inner fender
• Mounting location for a 3/4” LED marker
• Available with negative flare, zero flare and 3" flare
• California Residents: WARNING

G2 Axle & Gear Dana 44 Ring and Pinion Sets

From $150.49

• Dana 44 Ring and Pinion Sets
• Forged from 8620 steel
• Tight tolerances for easy setup and to maintain OE noise level specs
• Lapped to give the mating surface a smooth finish to reduce friction that can lead to noise and excessive wear
• California Residents: WARNING