Smittybilt XRC Front Bumpers

From $229.99

• Two-stage textured matte black powdercoat finish
• 3/16 inch cold rolled steel
• One-piece welded design
• Raised corners for better entry and exit
• Built-in winch plate to accommodate up to a 12k winch
• 5-year limited warranty
• California Residents: WARNING

Smittybilt SRC GEN2 Front Bumpers

From $689.99

• Welcome to the Smittybilt SRC Gen2 Front Bumper for Jeep
• Solid d-ring and jack point mount - welded on the inside and out!
• Aggressive design for with raised corners for better entry and exit angles for the most extreme conditions
• Fender to fender protection
• 2 inch 120 Wall over rider and kickers
• Lower design winch plate allows greater air flow and rated to accommodate up to 12k winch
• O.E. fog light provision
• Manufactured from 3/16 inch cold rolled steel
• Towable D-ring mounts
• Two-stage textured matte black powdercoat finish with 5-year limited warranty
• Smittybilt Advantage limited lifetime warranty: Great choice for a Wrangler front bumper
• California Residents: WARNING

Smittybilt M1 Front Bumpers

From $1,399.99

• Two stage matte Black finish powder coat finish
• Manufactured from 3/16 inch & 1/4 inch cold roll steel
• Ultra Bright Driving & Fog Lights
• Solid Mount D-Rings - Welds on the inside and out
• Solid plate center section that wraps the frame horns and lower cross member
• Smittybilt Advantage Warranty - Limited Lifetime Warranty
• California Residents: WARNING

Smittybilt SRC Front Bumpers

From $299.99

• Two-stage textured matte black powdercoat finish
• 2 tabs to mount lights
• Wide opening allows for winch installation
• 1/4 inch thick custom mounting brackets
• Welded d-ring tabs
• 5-year limited warranty
• California Residents: WARNING

Smittybilt XRC Atlas Front Bumpers

From $799.99

• Two stage textured matte black finish
• Innovative 3-piece design
• Lower design winch plate allowing greater air flow
• Manufactured from 3/16 inch cold rolled steel
• Bumper bolts directly to your vehicle
• Two 3/4 inch d-ring mounts
• 5 year limited warranty
• California Residents: WARNING

Smittybilt XRC GEN1 Front Bumper

From $529.99

• Two stage matte black powder coat finish
• Manufactured from 3/16" cold roll steel
• 1.75" 120 wall over rider and kickers
• Raised corners for better entry and exit under the most extreme conditions
• Solid mount D-Rings - Welds on the inside and out
• Solid plate center section that wraps the frame horns and lower cross member
• Built-in winch plate to accommodate up to 10k winch
• One-piece welded design
• 5-year limited warranty
• California Residents: WARNING

Smittybilt XRC Rock Crawler Winch Bumpers

From $429.99

• 2-stage Textured black powder coat
• Degree approach angles and raised corners
• 3/16 inch cold rolled steel
• Stinger is 1.75 inch tubing
• Accepts up to two 9 inch lights
• Bumpers bolt directly to your vehicle
• 5-year limited warranty
• California Residents: WARNING

Smittybilt SRC Front Stinger Bumpers

From $7,469.99

• Textured black finish
• Manufactured from 2 inch DOM 120 steel tubing and 3/16 inch cold rolled steel
• D-ring mounts welded inside and out
• Can be used with various winch plates
• California Residents: WARNING

Westin HDX Heavy Duty Grille Guards

From $1,309.99

• 2 inch tube, full wrap around wings
• Full "punch plate" grille
• 1-Piece welded uprights
• Extra wide rubber upright strips
• 1.25 inch tube for support wings
• Mount kit included
• California Residents: WARNING

Westin Sportsman 1-Piece Grille Guards

From $704.99

• Thick rubber protectors line uprights
• Center crossbars are 1.5inch diameter tubing
• Head light area guards are 1.5 inch diameter tubing
• Removable headlight area cross bars
• New applications feature Westin's Double Hood Bar!
• Mount kit included
• California Residents: WARNING

Westin HDX Front Bumpers

From $1,853.99

• 7 gauge steel
• 1-piece welded construction
• Aggressive chiseled design
• Fits most medium frame 8,000-12,000 lbs. winches (up to 10.25 inch tall)
• Fits remote solenoid box winches only*
• Pre-drilled for winch and fairlead mounting
• Laser-cut openings to allow engine cooling
• Built to receive (2) 10 inch LED light bars
• Optional light bar and pre-runner bar sold separately
• 1 inch thick HD shackle mounts
• Application specific designs
• California Residents: WARNING

Westin HDX Winch Mount Grille Guards

From $1,262.99

• HDX style grille guard fits most medium frame 8,000-12,500 lbs. winches (up to 10.25 inch tall)
• 2 inch tube, full wrap around wings
• 1.5 inch tube for support wings
• Full punch plate grille
• Utilizes MAX series faceplate for added style
• California Residents: WARNING

Smittybilt XRC Front Bull Bars

From $117.99

• Two-stage textured matte black powdercoat finish
• Requires front bumper part number S/B76810
• Manufactured from 1.75 inch tubing
• Two light tabs that can accommodate up to a 9 inch light
• Capable of mounting up to a 15,000 lb. winch
• 5-year limited warranty
• California Residents: WARNING

Smittybilt XRC Gen2 Front Bumpers

From $719.99

• UHMW (ultra-high-molecular-weight polyethylene) to provide the ultimate protection for rock crawling
• Manufactured from 3/16-inch cold rolled steel with two-stage textured matte black finish
• Powdercoat finish - 5 year limited warranty
• Smittybilt limited lifetime warranty
• Lower design winch plate allows greater air flow and rated to accommodate up to 12k winch
• 1.75" diameter .120 wall overrider and kickers
• O.E. fog light provision and towable D-ring mounts
• California Residents: WARNING

Smittybilt Stryker Front Bumper

From $679.99

• 3mm deep drawn formed steel
• Winch compatible up to 12k
• Modular wings sold separately
• Includes light provisions
• Inegrated d-ring and lift points
• OE fog light provision
• Integrated overrider with 13" lightbar provision

Smittybilt Adventure Series Front Bumpers

From $1,169.99

Smittybilt Apollo Front Bumper

From $809.99

• High and tight design for maximum clearance
• 1.5" x .120" wall structural tubing with 1/8" and 3/16" laser cut cold rolled sheet metal
• Removable overrider with front camera provision
• Winch compatible up to 12K
• Fits all non-Rubicon model OE fog lights
• D-ring recovery and jack points

Westin Pro-Mod Front Bumpers

From $1,085.99

• Lightweight modular design reduces shipping costs without sacrificing strength
• Increases ground clearance and angle of approach
• Constructed of 10 gauge steel for strength and style
• Mesh screen allows maximum air flow to intercooler or radiator area
• Has provisions for factory sensors - on some applications
• 10 gauge steel valance included - on some applications
• Valance features laser-cut Westin logo
• Bolt-on skid plate available - sold separately
• Compatible for facotry tow hooks - on some applications
• Outrigger brackets support the wings of the bumper for maximum strength
• Configured to accept most 30" LED light bars in the center position - sold separately
• Removable screen allows use of optional round or square Outlaw LED light kits - sold separately
• Hardware and mounting brackets included
• E-coated base coat provides long lasting corrosion protection

Westin Outlaw Front Bumpers

From $1,058.99

• Mount kit included
• Made of 14 gauge steel
• 2” diameter tube frame with 1.5” diameter center tubes
• Integrated bolt on LED light mounts for up to two single or one double row 30” LED Bar
• Equipped with mount points for optional auxiliary lighting
• Optional Outlaw Skid Plate available - sold separately
• Optional Outlaw LED Light Kits available - sold separately
• Round LED Light Kit with Westin Auxiliary Lights - sold separately
• Square LED Light Kit with Westin HyperQ Auxiliary Lights - sold separately
• California Residents: WARNING

Westin XTS Series Front Bumpers and Accessories

From $799.99

• 21-Current Ford Bronco (With sensor)
• High strength, lightweight design
• Low profile winch mount improves air flow
• Integrated lightweight 10-gauge steel shell & 4-gauge steel winch tray provides superior strength at an affordable price
• Features 4.5" x 10" winch mount pattern
• Accommodates most winches up to 12,000 lbs capacity
• Provides two recovery points for shackles
• Compatible with all factory sensors
• Optional skid plate (sold separately)
• Optional round bull bar or angular bull bars (sold separately)
• Hardware and mounting brackets included
• E-coated base coat provides long lasting corrosion protection
• Available in textured black finish
• California Residents: WARNING

Westin WJ2 Series Front Bumpers

From $711.99

• Available in full width or stubby
• Textured black finish
• 3/16-inch plate steel construction
• 2 side and 2 front off-road jack points
• 2 corner post mount points
• Rock Light mount points on lower bumper corners
• Hooks include shackle mount point for easy attachment
• Optional skid plate sold separately
• No drilling required – bolt on installation
• California Residents: WARNING

Westin HDX Bandit Front Bumpers

From $1,853.99

• Protects vehicle from damage against wildlife and road debris
• Provides added safety to driver and vehicle
• Heavy duty diamond plate steel
• Constructed of schedule 40 steel pipe
• Honeycomb mesh protects grille
• Heavy duty 2 3/4" wide upright rubber strips
• 1 1/2" headlight protection tubes
• 2" tube full wraparound wings ties into bumper
• Metal mesh screen allows maximum air flow to intercooler or radiator area
• Built-in 2" receiver hitch
• (2) Heavy duty 9,500 lbs bow shackle mounts
• 15/16" diameter shackle mount hole
• Compatible for factory fog lamps or LED post mount lights
• Custom die-cast riveted logo badge
• Mounting provisions for license plate
• Hardware and mounting brackets included
• Bolt-on installation - no drilling required

Smittybilt SRC Classic Rock Crawler Front Bumpers

From $187.99

• Two-stage textured matte black powdercoat finish
• 1/4 inch steel plate design
• Zinc undercoat
• Bumpers bolt directly to your vehicle
• Requires no drilling or modifications
• 5-year limited warranty
• California Residents: WARNING