Smittybilt XRC Atlas Front Bumpers

A: I went with the Smittybilt license plate holder they snaps on the fairlead rollers, it works great

A: I live in Massachusetts and need from bumper as well. I found it easier to remove one of the stainless grill plates and drill a whole through the license plate. Mounted this way it is not as aesthetically pleasing but works best

A: Yes it was the same for me just call the number that’s on the box and someone will email you the instructions.

A: No it does not, the winch plate is “cut out” so it works with current location of the pump

A: Not sure but I will pass this request onto our manufacturing team.

A: We include two safety chains to go from tow bar too vehicle. You would need to purchase separate safety chains to go from tow bar to vehicle and mount solution. We don’t include these because there are too many factors to take into consideration (chain length, front end accessories, accessible mounting places/points)

A: Yes you can flat tow with this bumper.

A: Hello tony and thank you for your question! Smittybilt XRC Atlas Front Bumper with Grill Guard and Fog Light Holes would need slight modifications to fit the Warn power Plant 9.5 winch.

A: Hello Jamie, Yes, the WARN 9.5ti will fit this bumper. Thank you for the question.

A: Hello Mark, You will need to relocate the vacuum pump on all 2012 and newer Jeep Wranglers. Wiring is provided for the fog lights. Thank you.

A: Hello Toby, No, the WARN ZEON winches will not fit this bumper. We do offer the XRC-9.5K Winch Synthetic Rope Gen2, With Aluminum Fairlead S/B98495 that will fit. Thank you.

A: Hello LittleBones, Yes, the Smittybilt XRC Atlas Front Bumper with Grill Guard and Fog Light Holes S/B76892 will fit your vehicle application. Thank you.

A: Hello bmack and thank you for your question! Smittybilt XRC Atlas Front Bumper with Grill Guard and Fog Light Holes has different mounting holes then the XRC M.O.D. Stinger.

A: hello Clay and thank you for your question! Smittybilt XRC Atlas Front Bumper with Grill Guard and Fog Light Holes can take up to a 12,000 pound winch.

A: Thanks for the inquiry keith, the Smittybilt XRC Atlas Front Bumper with Grill Guard and Fog Light Holes part # S/B76892 weighs 223 pounds.

A: Hello Terry, the Smittybilt XRC Atlas Front Bumper with Grill Guard and Fog Light Holes part# S/B76892 does not require you to move the vacuum pump. This bumper works around it. Thank you for your question.

A: Thanks for the inquiry Jeepgrl, the Smittybilt XRC Atlas Front Bumper with Grill Guard and Fog Light Holes part # S/B76892 we do offer upgraded JK fog lights from VisionX part # V/X9887616.

A: Hello Steve, This Smittybilt XRC Atlas Front Bumper with Grill Guard and Fog Light Holes is about a 3 hour job. I would add another hour or 2 if you are adding a winch inside the bumper to the install.

A: Hello Siche, Thank you for asking. If you have a winch on the bumper, you can attach this to your roller fairlead http://jo.my/mhzn4g

A: Thanks for the inquiry Bull, the Smittybilt XRC Atlas Front Bumper with Grill Guard and Fog Light Holes part # S/B76892 do come with chrome plates but you can paint them and we do not offer a cover if you don't run a winch.

A: Rebel, The Smittybilt XRC Atlas Front Bumper part number 76892 weighs 223lbs shipping weight.

A: MIke- Thanks for the question. The Smittybilt XRC Atlas Front Bumper with Grill Guard and Fog Light Holes does provide superior coverage compared to the stock front bumper on your 2012 Jeep Wrangler JK

A: Mike- Thank you for the question. Yes, the vacuum pump will need to be relocated on the 2012 and newer Jeep JK Wranglers. You do not need to move it for the 2007 to 2014 Jeep JK Wranglers.

A: Hello Mac, Thank you for the question. Yes, the factory fog lights will bolt-on to this bumper.

A: J. Mcltd.- Thanks for the question. The Smittybilt XRC Atlas Front Bumper with Grill Guard and Fog Light Holes will fit the Warn Zeon winch but will not fit the Powerplant / M8274-50 with the grille guard installed.

A: Bill- Thanks for the inquiry. Only the Grille Guards are stainless steel on the Smittybilt XRC Atlas Front Bumper with Grill Guard and Fog Light Holes

A: William- Thanks for the question. According to Smittybilt the vacuum pump relocation is not necessary with the new generation Smittybilt XRC Atlas Front Bumper with Grill Guard and Fog Light Holes

A: Hello Clint, Thank you for the question. You will need the optional OR-FAB Vacuum Pump Relocation Kit ORF87046. This bumper is winch ready and the over-rider grill guard comes with it.

A: Hi Duster The bumper does not have cover plates available to cover the unused winch holes at this time . But that is a fantastic idea. Thank you for the question

A: Hello JMP, Thank you for the question. Yes, the vacuum pump will need to be relocated on the 2012 and newer Jeep JK Wranglers. You do not need to move it for the 2007 to 2011 Jeep JK Wranglers.

A: Doorguy- Thank you for your question. The Smittybilt XRC Atlas Front Bumper with Grill Guard and Fog Light Holes does not have a specific skid plate for the sway bar disconnect. however it does provide excellent protection for the front of your JK Wrangler.

A: Doc- Thanks for asking. Yes you will be able to install the Smittybilt XRC Atlas Front Bumper with Grill Guard and Fog Light Holes without any welding.

A: CG Thank you for your question. The Warrior Products bracket to fit your licences plate to your Smittybilt XRC Atlas Front Bumper with Grill Guard and Fog Light Holes can be found here http://jo.my/l2088g

A: Deep Quest- Thanks for asking. Smittybilt does not offer the XRC Atlas bumper without the grill guard but it is removable.

A: Jeff- Thanks for asking. The Smittybilt XRC Atlas Front Bumper with Grill Guard and Fog Light Holes does fit the factory driving lights.

A: Brady- Thanks for the inquiry. The Smittybilt XRC Atlas front bumper will accept your JK wranglers factory fog lights but they are not included with the bumper.

A: Hayboss- Thanks for the question. According to Smittybilt the XRC Atlas Front bumper does not affect the crumple zones of the JK Wrangler so it should not affect the air bag operation.

A: I would recommend this Rugged Ridge licence plate mount here http://jo.my/ae7zg2 to mount your front plate on the Smittybilt XRC Atlas Front Bumper with Grill Guard and Fog Light Holes.