Smittybilt SRC Front Stinger Bumpers

A: I mounted a 9500lb Rough Country in mine. Tight fit and I had to mount the winch before mounting the bumper. There was not enough room to tighten the bolts otherwise. 

A: Yes it will fit

A: I have a 2015 jku, The stock bumper hooks came off with my stock bumper.

A: Keland, the Smittybilt JK SRC Front Stinger with D-ring Mounts in Textured Matte Black has a winch plate integrated in it, but the Provantage Winch will not fit since it is for ATV/UTV. You will want to run a winch that is rated for the Jeep- at least an 8000lb. Thanks for the question

A: Felix, the Smittybilt JK SRC Front Stinger with D-ring Mounts in Textured Matte Black measures 46.5" in overall width. Tip of stinger to bumper mounting surface about 13". You will need to check your local laws to ensure that it is street legal in your area.

A: Hello Hooyahsmith, The Smittybilt JK SRC Front Stinger with D-ring Mounts in Textured Matte Black does not have provisions for the factory fog lights. You can use lights mounted on the bumper though. Thanks for the inquiry.

A: Hi Stone No the power plant will not fit in the SRC Front Stinger Bumper. Thanks

A: Hey Benjamin, this Smittybilt JK SRC Front Stinger with D-ring Mounts in Textured Matte Black bumper has a weight of 102 lbs. Thanks for your question.

A: O, the Smittybilt JK SRC Front Stinger with D-ring Mounts in Textured Matte Black is street legal in most areas, but you should check you local laws about tire coverage to be sure. I hope this helps.

A: Hi Benjamin, This Smittybilt front stinger style bumper replaces the stock bumper, it does not attach to it and it fits great on the JK Wranglers. Thank you for the inquiry!

A: Hello Steve 2014 and thank you for the inquiry on the Smittybilt JK SRC Front Stinger with D-ring Mounts in Textured Matte Black. This part will not affect the functionality of your stock air bag sensors which are mounted on your vehicles frame by the factory. Here is the link to get back to the ordering page: http://jo.my/oqk58e.qrcode

A: Hello Bubby, The Smittybilt JK SRC Front Stinger with D-ring Mounts in Textured Matte Black does not have holes for lights. However you could easily drill holes to mount your lights.Thanks for the inquiry.

A: Typical install time on the Smittybilt JK SRC Front Stinger with D-ring Mounts in Textured Matte Black is 1 to 2 hours. Hope this helps!

A: Thanks for the inquiry Bobby Bones, the Smittybilt JK SRC Front Stinger with D-ring Mounts in Textured Matte Black part # S/B76524 is retro-fitted where you do not need to relocate the vac.

A: Hello mark and thank you for your question! Smittybilt JK SRC Front Stinger with D-ring Mounts in Textured Matte Black could take any driving or fog light up to 7" diameter.

A: Hello Jake, The Smittybilt JK SRC Front Stinger with D-ring Mounts in Textured Matte Black will require a licence plate mount that connects to the winches roller fairlead Part# S/B4432.

A: Hello Dj, the Smittybilt JK SRC Front Stinger with D-ring Mounts in Textured Matte Black part# S/B76524 will fit your 2012 wrangler. you will need to relocate your vacuum pump but this bumper comes with the parts you need to do that. Thank you for your inquiry.

A: Hello there, the Smittybilt JK SRC Front Stinger will accept D-rings with a 3/4in pin. Shop with us anytime, on your schedule. Browse 4WheelParts.com, call our customer service center, or come visit us in one of our stores. You can even save on shipping costs by shopping online and picking your order up in a store. No matter which method you prefer, we’re ready to help with excellent parts, advice, and service.

A: Jp, the Smittybilt JK SRC Front Stinger with D-ring Mounts in Textured Matte Black has a built in winch plate so you can bolt this on and mount a winch right to it. Hope this helps!

A: Hey Michael, this bumper can be used with both. Thanks for your question.

A: Thanks for the inquiry amy_rubicon, the Smittybilt JK SRC Front Stinger with D-ring Mounts in Textured Matte Black part # S/B76524 is 1 piece and if you don't install a winch, you'll have an open area on the backside of the bumper where a winch can mount.

A: Hello Jim, the d ring mounts on the Smittybilt JK SRC Front Stinger with D-ring Mounts in Textured Matte Black can be used for winching or towing. Thank you for your question.

A: Hello Jake, Thank you for the question. Correct, this is the bumper with stinger and d-ring mounts. It will fit your vehicle application.

A: Hello James, Thank you for the question. Shipping weight is 102 lbs and light diameter will determine if the blinkers will become blocked. We suggest 4 x 4 LED lights.

A: Hello Ericg, Thank you for the question. if you own a 2012 or newer Jeep you will need to relocate the vacuum pump.

A: Hi Eric The Smittybilt SRC Stinger front bumper will not require relocation of any components I have included a link to the instructions http://jo.my/wtt5mj Thank You

A: Matt- Thanks for the inquiry. The Smittybilt JK SRC Front Stinger with D-ring Mounts in Textured Matte Black does not come with a winch plate as it is built into the bumper itself.

A: Jim, the Smittybilt JK SRC Front Stinger with D-ring Mounts in Textured Matte Black is the complete assembly of bumper and stinger together. For the JK SRC stinger bumpers, it also comes with the winch plate all ready to go. As far as drilling and mods, this bumper is easy to install- just take the old one off, and put this in it's place with no extra work. If you have any other questions, please let me know! Thanks.

A: Clay- Thanks for the question. Yes you will need a winch plate to go with your Smittybilt JK SRC Front Stinger with D-ring Mounts in Textured Matte Black. You can find the plate here http://jo.my/x1dvww

A: Oscar- Thanks for the question. The Smittybilt JK SRC Front Stinger with D-ring Mounts in Textured Matte Black is the bumper with the stinger.

A: Cobra- Thanks for the question. Yes the Smittybilt JK SRC Front Stinger with D-ring Mounts in Textured Matte Black is drilled for two lights.