A: I mounted a 9500lb Rough Country in mine. Tight fit and I had to mount the winch before mounting the bumper. There was not enough room to tighten the bolts otherwise. 

A: Yes it will fit

A: I have a 2015 jku, The stock bumper hooks came off with my stock bumper.

A: Hello Steve 2014 and thank you for the inquiry on the Smittybilt JK SRC Front Stinger with D-ring Mounts in Textured Matte Black. This part will not affect the functionality of your stock air bag sensors which are mounted on your vehicles frame by the factory. Here is the link to get back to the ordering page: http://jo.my/oqk58e.qrcode

A: Typical install time on the Smittybilt JK SRC Front Stinger with D-ring Mounts in Textured Matte Black is 1 to 2 hours. Hope this helps!

A: Thanks for the inquiry Bobby Bones, the Smittybilt JK SRC Front Stinger with D-ring Mounts in Textured Matte Black part # S/B76524 is retro-fitted where you do not need to relocate the vac.

A: Hello mark and thank you for your question! Smittybilt JK SRC Front Stinger with D-ring Mounts in Textured Matte Black could take any driving or fog light up to 7" diameter.

A: Hello Jake, The Smittybilt JK SRC Front Stinger with D-ring Mounts in Textured Matte Black will require a licence plate mount that connects to the winches roller fairlead Part# S/B4432.

A: Hello Dj, the Smittybilt JK SRC Front Stinger with D-ring Mounts in Textured Matte Black part# S/B76524 will fit your 2012 wrangler. you will need to relocate your vacuum pump but this bumper comes with the parts you need to do that. Thank you for your inquiry.

A: Hello there, the Smittybilt JK SRC Front Stinger will accept D-rings with a 3/4in pin. Shop with us anytime, on your schedule. Browse 4WheelParts.com, call our customer service center, or come visit us in one of our stores. You can even save on shipping costs by shopping online and picking your order up in a store. No matter which method you prefer, we’re ready to help with excellent parts, advice, and service.

A: Thanks for the inquiry amy_rubicon, the Smittybilt JK SRC Front Stinger with D-ring Mounts in Textured Matte Black part # S/B76524 is 1 piece and if you don't install a winch, you'll have an open area on the backside of the bumper where a winch can mount.

A: Hello Jim, the d ring mounts on the Smittybilt JK SRC Front Stinger with D-ring Mounts in Textured Matte Black can be used for winching or towing. Thank you for your question.

A: Hello Jake, Thank you for the question. Correct, this is the bumper with stinger and d-ring mounts. It will fit your vehicle application.

A: Hello James, Thank you for the question. Shipping weight is 102 lbs and light diameter will determine if the blinkers will become blocked. We suggest 4 x 4 LED lights.

A: Hello Ericg, Thank you for the question. if you own a 2012 or newer Jeep you will need to relocate the vacuum pump.

A: Hi Eric The Smittybilt SRC Stinger front bumper will not require relocation of any components I have included a link to the instructions http://jo.my/wtt5mj Thank You

A: Matt- Thanks for the inquiry. The Smittybilt JK SRC Front Stinger with D-ring Mounts in Textured Matte Black does not come with a winch plate as it is built into the bumper itself.

A: Clay- Thanks for the question. Yes you will need a winch plate to go with your Smittybilt JK SRC Front Stinger with D-ring Mounts in Textured Matte Black. You can find the plate here http://jo.my/x1dvww

A: Oscar- Thanks for the question. The Smittybilt JK SRC Front Stinger with D-ring Mounts in Textured Matte Black is the bumper with the stinger.

A: Cobra- Thanks for the question. Yes the Smittybilt JK SRC Front Stinger with D-ring Mounts in Textured Matte Black is drilled for two lights.