Westin HDX Heavy Duty Grille Guards

A: No it unfortunately does not, I myself am dealing with this issue, the collision sensors go off when you start your truck. I'm trying to find a way to recalibrate the sensors to not pick up the brush guard.

A: No , but you should not need to relocate them with this brush guard.

A: No it does not you need part #57-3995S.

A: Yes, use the MAX WINCH TRAY FACE PLATE: Part No. WES46-70150 or Part No. WES57-94065 (Steel - Mount kit included) Not Compatible With Optional 6” & 10" HDX Flush Mount B-Force LED Mount Kit Part # 57-0025 & 57-0035.

A: Winch tray & mount kit sold separately (Part No: WES46-23975) also Set of 2 light clamps sold separately.

A: 2019-2021 Chevrolet Silverado 1500 (Excl. 2019 Silverado LD (Lane Departure) it will work with Duramax equip trucks. Will interfere with function of front parking sensor if equipped. Minor trimming to tow hook pocket area required. Will interfere with block heater plug

A: It’s plenty of space to install lights. I didn’t do it, but  I see underneath is good space for fog lights. It’s not going to block the way for the air flow. Over all a lot of choices for light installation. 

A: That is a question for Westin [email protected], Check out: Part Number: ADSF611422770103 this fits the 2019 Rebel.

A: Winch tray (plate) sold separately. Part No. WES46-23985

A: Westin HDX Grille Guard (Black) - 57-93975A. Does not come with hardware to mount to truck.

A: The weight of piece is about 170 lbs. 

A: 2022 hasn't been tested yet. 2021 Chevrolet Tahoe FITS: HDX WINCH MOUNT GRILLE GUARD Part No. 57-94045 | APPLICATION NOTE Minor Trimming Of Tow Hook Pockets Required ~ Will Interfere With Front Parking Sensors If Equipped ~ Trimming to front bumper plastic required. • Mount kit included | • 1-piece welded uprights | • 2" tube full wraparound wings | • Full punch plate grille | • Tray brackets mount directly to the vehicle frame | • Winch trays tested to a minimum straight line pull | of 16,500 lbs. | • Fits most medium frame 8,000 - 12,000 lbs. winches (up to 10.25" tall) | • Set of 2 light clamps sold separately

A: Westin HDX Grille Guard (Black) - 57-3945 - Choose from a polished stainless steel finish or a black powdercoat mild steel finish.

A: Will interfere with function of front parking sensor (if equipped) No bracket offered at this time.

A: No mention of it in the instructions: https://www.westinautomotive.com/images/ePIM/original/75-57402-RevA.pdf

A: The HDX Grille Guard #57-4020 fits 2021-2019 Ram 2500-3500 Start below the front of the vehicle. Unbolt the two factory bolts (three if tow hooks are equipped) from the bumper bracket on each side.

A: APPLICATION: 2019-2021 Ram 1500 (Excl. 2019-2020 1500 Classic, Rebel, & Warlock)

A: Yes it will.

A: No it will not fit.

A: Looks like you would, the instructions state: "Determine if your vehicle is equipped with factory frame horns, if so the factory hardware will be used to install the mounting brackets, if not equipped attach by locating the factory slot and hole on the outside of the drivers side frame."

A: You will need 2 sensor kits, Part # 40-0015S.

A: It only comes in powder coated black.

A: The Factory tow hooks will be removed and cannot go back on. Removal of bumper will be needed due to cutting of the bumper.

A: My truck didn’t come with senors or front camera. Easy install sits below tow hooks 

A: Part #57-3975 fits a new body style 2019-2021 Ram 1500.

A: We do not stock this item. It would ship to you from the vendor. Our sales team can call them to see if they have it in stock Toll Free: 1-877-474-4821

A: No it will not fit.

A: It shouldn't interfere With the sensors Or front camera but double check with the year make and model of your vehicle.

A: Yes, it will. Westin offers the 57-3945 for apps with front camera, but they do not offer it in stainless steel.

A: In order to install the mounting brackets, the tow hook pockets will need to be cut out. Just cut out on the bumper to fit the bracket.

A: Unfortunately per Westin, yes it will interfere with TSS system.

A: Sir, If you have a welder and fabricate brackets you can probably make it fit but you wont be able to bolt it on. Hope this helps thanks for the question.

A: Hello LATE4GATE, Yes, the Westin HDX; Heavy Duty Grille Guard WES57-2235 is 100% bolt-on installation. Thank you.

A: Thanks for the inquiry DAVID, the Westin HDX; Heavy Duty Grille Guard par # WES57-2015 this product is unavailable for the 2015 F150 at this time.

A: What truck are you working on and we can look it up for you? They have over 50 different models / part numbers. Thanks

A: Hello Trent, Thank you for asking. The Westin HDX; Heavy Duty Grille Guard is not available for your vehicle.

A: Yes

A: Hello there, the Westin's HDX Commercial Grade Grille Guard is a bold statement of authority with its 2 inch diameter tube frame. The HDX Grille Guard is made of a 1-piece welded construction. The wing's interior tube and the wing's bottom support tube are 1.25 inch in diameter. Uprights are fully lined with 1/8 inch thick and 2 inch wide rubber strip to protect the grille guard from bumps and scrapes. The HDX Grille Guard also features a full punch plate center grille to intercept impact from flying debris. Optional Light Clamps are available, 57-0000 in SS and 57-0005 in BLK, which allow lights to be mounted to the cross tube and punch plate. This will fit you're truck. Shop with us anytime, on your schedule. Browse 4WheelParts.com, call our customer service center, or come visit us in one of our stores. You can even save on shipping costs by shopping online and picking your order up in a store. No matter which method you prefer, we’re ready to help with excellent parts, advice, and service.

A: Hello Lucy and thank you for your question! Westin HDX Heavy Duty Grille Guard part number WES57-3540 is not a winch ready grille guard.

A: Hello Guy, the Westin HDX; Heavy Duty Grille Guard will require you to remove your factory tow hooks. Thank you for your inquiry.

A: Hello trimmitup and thank you for your question! Westin HDX; Heavy Duty Grille Guard will eliminate your tow hooks.

A: Thanks for the inquiry Dersoldat 61 , the Westin HDX; Heavy Duty Grille Guard part # WES57-2500 according to Westin there are no footnotes on this part # requiring the removal of factory tow hooks.

A: Hello Lauen, Thank you for asking. The Westin HDX; Heavy Duty Grille Guard is for your 2012 Ram 1500.

A: Thanks for the inquiry s, the Westin HDX; Heavy Duty Grille Guard part # WES57-2015 is only available as a 1 piece guard with the headlamp guards.

A: Thanks for the inquiry spaz02, the Westin HDX; Heavy Duty Grille Guard part # WES57-3540 does come with mounting hardware and weighs 105 pounds.

A: Thanks for the inquiry Bevlin Kade, the Westin HDX; Heavy Duty Grille Guard part # WES57-2275 Westin does not offer this product for a Nissan.

A: Hello Inferno and thank you for your question! Westin HDX; Heavy Duty Grille Guard part number WES57-3545 is the correct grille guard for your 2011 Ram Lone Star. I hope my answer get 4 Wheel Parts your business!

A: Bob in Vegas from Las Vegas, Thanks for the question.Part # 57-2235 Westin HDX; Heavy Duty Grille Guard weighs 140 lbs.

A: Hello Mudder Trucker, Thank you for the question. 1> They mount with brackets to the frame. 2> This is not a winch ready grill guard.

A: Hello Tanya, Thank you for the question. This part number will not fit your vehicle application. The correct part number is WES57-2235

A: Bryan- Thanks for the question. You can find the Westin 57-93545 here http://jo.my/78a738

A: Jerry- Thanks for the inquiry. Westin does not offer the Westin HDX Heavy Duty Grille Guard for a 2000 Toyota Tacoma PreRunner

A: Hello Ethan, Thank you for the question. This grill guard fits the 2011 to 2014 Ford F250/350/450/550HD Super Duty. Westin does not offer the HDX grill guard for your vehicle application at this time. They do offer the Westin Sportsman 1-Piece Grille Guard Part Number: WES45-1200

A: Thank you for your question te. No the Westin HDX Heavy Duty Grille Guard will not fit a Lexus LX450

A: Big Red- Thanks for the question. The Westin HDX; Heavy Duty Grille Guard will not fit your 91 bronco with out substantial modification and fabrication. Any modification to the guard will make the guard un returnable.

A: Hello C, Thank you for the question. This will not cover the front license plate on your vehicle application.

A: Hello John, Thank you for the question. No, this part number fits the 2009 to 2014 Ford F150. Westin does not offer a HDX Grill Guard for your vehicle application at this time.

A: Hello Mike, Thank you for the question. The Westin HDX Heavy Duty Grille Guard is a direct bolt-on application. No cutting or drilling required.

A: Hello Hanz, Thank you for the question. Yes, this will fit the 2009 to 2014 Ram 1500.

A: Thank you for your question Mark. Here is a link to the correct part number for your 2014 Ram 3500 Westin HDX Heavy Duty Grille Guard http://jo.my/95qh14

A: Angel- Thanks for the question. Westin does not offer this HDX Heavy Duty Grille Guard for your 1998 Ford F-150 XLT 4x4

A: Vicki- Thanks for the question. Westin does not offer the Westin HDX Heavy Duty Grille Guard for the 2012 Jeep Wrangler Unlimited Sport.

A: Mike- Thanks for the question. Westin does not currently offer the the HDX Heavy Duty Grille Guard for your 2014 Ram 1500 Laramie

A: Thank you for your question Ryan. The Westin HDX HD Grille Guard does not have an application for your 1997 Dodge 1500

A: Hello Casey, Thank you for the question. This part number fits a 2009 to 2014 Ford F150. The correct part number is WES57-3545 (Fits 2009 to 2014 Dodge Ram 1500).

A: Hello Tex, Thank you for the question. No, this part number fits the 2009 to 2014 Ford F150. You would need the part number WES57-2015 (Fits the 2004 to 2008 Ford F150)

A: Hello Nolan, Thank you for the question. No, this fits the 2007 to 2013 Chevy Silverado 1500. Westin does not offer the HDX for your specific application at this time. They do offer the Sportsman; 1-Piece Grille Guard Part Number: WES40-0245

A: Hello Austin, Thank you for the question. This will not fit your vehicle application. This part number fits the 2009 to 2014 Ford F150 2WD & 4WD. They do not offer the HDX for your vehicle application at this time.

A: Hello Tony, Thank you for the question. This grill guard fits the 2011 to 2014 Ford F250/350/450/550HD Super Duty. The correct part number for your vehicle application is WES57-3540.

A: Corey- Thanks for asking. Westin does not offer the HDX Heavy Duty Grille Guard for your 2000 F-250 Super Duty.

A: Sparky- Thanks for the question. Westin does not offer the HDX heavy duty grille guard for your 1996 Ford Bronco

A: Hello Mood, Thank you for the question. The Westin HDX; Heavy Duty Grille Guard Part Number: WES57-2505 fits the 2009 to 2014 Ford F150. Unfortunately they do not offer a HDX Grill Guard for your vehicle application at this time.

A: Big Bear- Thank you for your question. The Westin HDX; Heavy Duty Grille Guard does not have a provision for mounting a winch.

A: Justin- Thanks for the question. This part number Westin HDX Grille Guard will not fit your 2006 Ford F-150 but you can find the one that does here http://jo.my/528xrg

A: Todd- Thanks for the question. Westin does not offer the HDX Heavy Duty Grille Guard for any year 4Runner

A: Rosalinda- Thanks for the question. This part number Westin HDX Grille Guard will not fit your 2012 Chevy Silverado 1500 but you can find the correct part number here http://jo.my/jxyp6s

A: Hello Paul, Thank you for the question. No, the Westin HDX; Heavy Duty Grille Guard WES57-3555 will not fit your vehicle application. We do offer the Sportsman; 1-Piece Grille Guard WES40-0605

A: Brandon- Thanks for asking. The Westin HDX Heavy Duty Grille Guard is just a grille guard.

A: CJ- Thanks for the question. You would have to remove the Westin HDX Heavy Duty Grille Guard to remove the headlight assembly.

A: Mark- Thanks for asking. Yes your factory tow hooks will have to be removed to install the Westin HDX Heavy Duty Grille Guard

A: Taylor- Thanks for the quesiton. The Westin HDX heavy Duty Grille Guard weighs in at 77 lbs.

A: Taylor- If you order the Westin HDX Heavy Duty Grille Guard and pick it up in store it will ship for free.

A: Brandon- Thanks for asking. The Westin HDX Heavy Duty Grille Guard mounts to the same place as the factory bumper, directly to the frame rails. The length of install will depend on your ability and tools available.