Rubicon Express Extreme Duty Suspension Lift Kits

From $1,133.95

• Extreme-Duty Kits Typically Include/Achieve The Following:
• Long Arm Suspension Improves Handling and Ride Quality, Chromoly Lower Control Arms for Durability, 3 piece Belly Pan For Arms For Easy Access to Transmission
• Rebuildable/Serviceable Super-Flex Joints, Can Run At Taller Lift Heights,
• Multiple Lift Kits for Jeeps available
• California Residents: WARNING

Rubicon Express Standard Coil System Lift Kits

From $263.99

• Standard Kits Typically Include/Achieve the Following:
• Replacement Coils
• Easy Bolt On Installation
• Increases Height for Larger Tires
• California Residents: WARNING

Fabtech Basic Lift Systems

From $1,061.19

• Front Lift: Crossmember & Steering Knuckles
• Rear Lift: Lift Blocks with U-Bolts
• Includes: Lower control arm eccentric cams, sway bar drop brackets and more
• Shocks: Front & Rear Twin Tube Performance Shocks
• Multiple Lift Kits for Jeeps available
• California Residents: WARNING

Fabtech Radius Arm Systems

From $1,711.42

• Full Tubular Structure Strengthened by dimple die side plates
• Installation Hardware Included
• Includes Replacement Coil Springs
• Multiple Lift Kits for Jeeps available
• California Residents: WARNING

Fabtech 4 Link Lift Kits

From $2,308.47

• The 4 Link design provides the best ride, best handling, and the most articulation and suspension travel overall
• While there are other long arm, 3 link, radius arm systems on the market, these do not provide the reduced caster change and useable articulation on a JK, with the factory gas tank, that a Fabtech 4 Link long arm system can
• California Residents: WARNING

Fabtech Performance Lift Kits

From $1,206.94

• Allows use of stock tires & wheels
• No driveshaft change required for AutoTrac models
• Crossmembers constructed of heavy 1/4” thick plate steel
• Solid steel billet sway bar end links
• Includes 1/4” thick steel differential skid plate
• Tubular impact struts included
• Retains factory steering centerlink & upper control arms in stock location
• California Residents: WARNING

Fabtech Budget Lift Kits

From $1,031.63

• 2 Retains factory front coil springs for a like stock ride
• Radius Arm drop brackets provide proper caster with the increased ride height
• Trac Bar is relocated to center axle under vehicle and work with the factory Pitman Arm
• Includes driveshaft carrier bearing spacer for smooth driveline operation
• Front bump stops are relocated to control suspension travel
• Performance Shocks provide a quality ride with extended durability compared to stock shocks
• Allows use of 35” tall tires with required fenderwell trimming
• California Residents: WARNING

Fabtech Ultimate System Lift Kit

From $1,422.25

• Mild lift height of 4” for use of 35” tall tires
• Tubular upper control arms include heavy duty extended range ball joints that provide an additional 2” of travel over stock
• No loss of ground clearance
• No cutting, welding or drilling required for installation
• Optional front Dual Shock System provides increased damping capacity for offroad use
• California Residents: WARNING

Fabtech Spindle Systems

From $1,043.69

• Front and Rear Shocks Included
• Installation Hardware Included
• Total Bolt On Installation
• Multiple Lift Kits for Jeeps available
• California Residents: WARNING

Fabtech Coilover Conversion Systems

From $2,337.41

• 4.0 Coilover Conversion System
• Bolt-On Coilover Conversion System
• All Required Hardware
• Multiple Lift Kits for Jeeps available
• California Residents: WARNING

Fabtech Uni-Ball Upper Control Arm Lift Kits

From $1,128.65

• Tubular arms eliminate factory upper ball joint w/ super strong 1" ID Stainless Steel American Uniball for increased suspension strength
• Additional caster is built into Arms for enhanced align ability with oversized tires
• 1.50" OD .120" wall 4130 Chromoly tubing reduces flex found in stock arms for more positive road feel
• 17-4 Heat treated Uniball pin fits into factory ball joint taper without modification to the spindle for easy return to stock feature
• 17-4 Stainless steel misalignments for proper clearance of large Uniballs throughout the travel range
• .250 wall DOM bushing barrels with welded gussets for strength
• Billet Aluminum versions also avaliable that feature: 6061 Billet Aluminum with thick cross sections for strength
• PTFE lined 1” Stainless Steel FK Uniballs for severe offroad use
• Heat Treated 17-4 Stainless Steel Uniball Pins fit into stock BJ taper
• Arms are adjustable to provide increase front end align ability
• Stunning black anodizing with flawless machine work
• California Residents: WARNING

Fabtech Long Arm System

From $1,358.61

• Includes Upper and Lower Long Arms
• Installation Hardware Included
• Allows for maximum articulation for off-road use with the ability to absorb highway road noises for a quiet ride
• Multiple Lift Kits for Jeeps available
• California Residents: WARNING

Fabtech Trail System Lift Kits

From $1,755.96

• Lower Short Arm Links Front & Rear
• Standard Coil Springs Front & Rear
• Track Bar Brackets Front & Rear
• Sway Bar Links Front
• Pitman Arm
• Brake Line Drop Bracket Rear
• E Brake Bracket
• Bump Stop Extensions Front
• Bump Stop Brackets Rear
• Optional Upper Links available
• California Residents: WARNING

Fabtech Sport System Lift Kits

From $1,033.52

• Standard Coil Springs Front & Rear
• Track Bar Bracket Rear
• Sway Bar Links Front
• Brake Line Drop Bracket Rear
• Parking Brake Bracket
• Urethane Bump Stops Front
• Bump Stop Brackets Rear
• California Residents: WARNING

Fabtech Basic Coil Over Kits

From $2,132.50

• Basic Coil Over Kit
• Included All Installation Hardware
• Features high velocity 9-stage valving shocks
• Multiple Lift Kits for Jeeps available
• California Residents: WARNING

Fabtech RTS System

From $2,628.76

• RTS System
• Installation Hardware
• California Residents: WARNING

Rubicon Express Super-Ride Suspenion Lift Kits

From $3,109.96

• Available with or without shocks
• 1.75" diameter 4130 chromoly Super-Ride front lower arms
• Extended sway bar end links and extended bump stops
• California Residents: WARNING

Fabtech Ball Joint Upper Control Arm Lift Kits

From $1,026.39

Fabtech Spring Hanger Kits

From $1,062.16

• Obtains 2.5 inch of front end lift without changing the front leaf springs
• Installation Hardware Included
• No welding or cutting required
• Multiple Lift Kits for Jeeps available
• California Residents: WARNING

Fabtech Coilover System w/Dirt Logic 2.5

From $1,327.14

• 2.5 Dirt Logic Coilovers
• Sold As: Pair
• Adjustable Coilover Construction
• Multiple Lift Kits for Jeeps available
• California Residents: WARNING

Fabtech Crawler System

From $3,838.60

• Converts factory 4 link to Fabtech's Radius Arm Design
• Adjustable Radius Arm Links are made of 5/16 inch thick steel
• Dropped Pitman Arm Included
• Multiple Lift Kits for Jeeps available
• California Residents: WARNING