Fabtech Crawler System

PRODUCT OVERVIEW

For the extreme off-roader and rock crawler, Fabtech offers the Crawler system. This system will allow use of 37 inch tires for aggressive offroading. The front system is a conversion from the factory 4 link to Fabtech's Radius Arm design. The adjustable Radius Arm links are made of 5/16 inch thick steel for max dent resistance with rotational urethane joints at each end for unrestricted articulation. These Radius Arms mount to a 1/4 inch thick steel crossmember that bolts to the frame under the transmission. The front steering geometry is relocated via a dropped pitman arm. A Trac Bar relocation bracket keeps the arc of travel between the Trac Bar and Drag Link proper to reduce bump steer throughout the suspension travel.Front lift is achieved by either coil springs or coilovers. The rear system retains the factory 5 Link design but with extended length lower tubular arms that bolt to new side frame brackets. The upper links are replaced as well with a tubular style in the factory mounts. Both upper and lower links feature 5/16 inch thick wall links with adjustable rotational urethane ends. The rear Trac Bar is relocated to keep the rear axle tracking with the front axle for superior road handling at high speed. For increased ground clearance at the rear axle, we provide replacement shock mounts that allow trimming of the factory mounts. This allows an additional 1 inch of ground clearance over the factory mounts. We offer heavy duty replacement driveshafts to be used with this system. Exhaust modification required. Use 37/12.50R17 tires w/ 17x8.5 wheels w/ 5? BS w/ minor trimming