Rubicon Express Extreme Duty Suspension Lift Kits

From $1,133.95

• Extreme-Duty Kits Typically Include/Achieve The Following:
• Long Arm Suspension Improves Handling and Ride Quality, Chromoly Lower Control Arms for Durability, 3 piece Belly Pan For Arms For Easy Access to Transmission
• Rebuildable/Serviceable Super-Flex Joints, Can Run At Taller Lift Heights,
• Multiple Lift Kits for Jeeps available
• California Residents: WARNING

Rubicon Express Standard Coil System Lift Kits

From $263.99

• Standard Kits Typically Include/Achieve the Following:
• Replacement Coils
• Easy Bolt On Installation
• Increases Height for Larger Tires
• California Residents: WARNING

Rubicon Express Coil Springs

From $129.99

• Rubicon coils are designed to provide the best in ride quality without sacrificing durability and load capacity. All coils are powder coat silver. Our coils are made with the most advanced processes in the industry. Every coil is tested and checked for compliance to our rigid specifications.
• California Residents: WARNING

Rubicon Express Monotube Shock Absorber Kits

From $359.96

• Developed and tuned specifically for each application
• Deliver maximum control while not compromising ride quality
• Robotically welded
• 14mm steel piston
• Shock Absorber Kit includes four shocks
• California Residents: WARNING

Rubicon Express Super-Flex Control Arms

From $123.20

• Rubicon Express adjustable lower control arms for Jeep JK Wrangler provide yet another path of modification for your JK. Made from thick wall DOM tubing and featuring the very reliable Rubicon Super-Flex joint these arms will allow for additional adjustment of your short arm suspension, unrestrained movement of your axles off road and unmatched durability when the going gets rough. Adjustment range from factory length to +1? allows for a versatile set up of pinion, caster, and wheel base or simply a replacement solution for your damaged OE control arms. Rubicon Express adjustable lower control arms are powder coat for corrosion resistance and covered by the Rubicon Express Advantage Warranty. We build it so you can use it!
• California Residents: WARNING

Rubicon Express Leaf Springs

From $114.99

• 4 inch standard lift spring for YJ Wranglers. Contains 5 leafs. You may run these leaf packs front or rear.
• California Residents: WARNING

Rubicon Express Monotube Shocks

From $162.49

• Developed and tuned specifically for each application
• Deliver maximum control while not compromising ride quality
• Robotically welded
• 14mm steel piston
• California Residents: WARNING

Rubicon Express Track Bars

From $151.99

• Correct alignment and handling problems on lifted vehicles with our front adjustable chromoly track bar. Easy installation works on vehicles with 3.5 inch - 4.5 inch of lift. Allows for more wheel travel than the stock unit and features a replaceable rod end for easier future maintenance.
• California Residents: WARNING

G2 Axle & Gear Replacement Axle Kits

From $114.99

• Axle upgrade engineered to withstand the additional load of high-torque applications
• Stronger than factory
• Comes with full manufacturer warranty
• California Residents: WARNING

G2 Axle & Gear Master Ring and Pinion Installation Kits

From $116.99

• G2 ring and pinion installation kit
• Includes Timken bearings, ring gear bolts, shims to set pinion and carrier bearing preloads, pinion seal and pinion nut
• California Residents: WARNING

G2 Axle & Gear Tork Front Axle Kits

From $66.00

• Axle upgrade engineered to withstand the additional load of high-torque applications
• Stronger than factory
• Heat-treated for strength
• California Residents: WARNING

Rubicon Express Economy Lift Kits

From $219.99

• Economy Kits Typically Include/Achieve The Following:
• .75 - 2 inch of lift, Front and Rear Bump Stop Pads,
• Precision Valved Shocks, Rear Track Bar Bracket
• Multiple Lift Kits for Jeeps available
• California Residents: WARNING

Rubicon Express Sway Bar Disconnect Sets

From $143.99

• Significantly improves suspension travel for enhanced off-road performance
• Greasable Bushings
• Heavy Duty steel construction provides high strength and long life
• California Residents: WARNING

G2 Axle & Gear Dana 44 JK Ring and Pinion Sets

From $103.50

• Dana 44 JK Ring and Pinion Sets
• Forged from 8620 steel
• Tight tolerances for easy setup and to maintain OE noise level specs
• Lapped to give the mating surface a smooth finish to reduce friction that can lead to noise and excessive wear
• California Residents: WARNING

Rubicon Express Extreme Duty Control Long Arms

From $115.00

• These arms are used in conjunction with the RE4020 arms to convert the factory four link to a radius arm design
• This change improves ride, handling, and driveline geometry in your lifted Jeep
• This arm is constructed out of 2 inch x 1/4 inch wall 4130 chromoly and is nearly bulletproof
• The arms are adjustable and feature our Super-Flex joints for increased axle articulation

G2 Axle & Gear Ring and Pinion Sets

From $108.00

• Engineered and manufactured to handle increased load
• Forged from high-strength 8620 Steel
• Precision-machined to OE specifications for perfect mesh
• Tight tolerances ensure easy set up and quiet OE-like operation
• Double-lapped and shot-peened for improved longevity
• Heat-treated for added durability
• Wide application range from
• Full 10-year warranty
• California Residents: WARNING

G2 Axle & Gear Hammer Differential Covers

From $119.99

• G2 aluminum differential covers are designed to not only protect your ring & pinion, they are designed to help cool your gear oil for prolonged bearing life. Made from high strength heat treated aluminum to withstand direct hits, these covers help protect your investment while adding a distinct look to your vehicle.
• California Residents: WARNING

Rubicon Express Brake Line Sets

From $109.99

• Built to last
• Features thick stainless steel outer casing riding on a rubber casing outside a kevlar casing housing a Teflon inner hose
• Mounting brackets included where necessary
• Always properly bleed system after installation and verify that brake lines do not contact tires, moving suspension components and that length is sufficient for full travel
• Built to DOT specifications

Rubicon Express Drive Shafts Kits

From $1,098.96

• Automatic or manual transmission
• Includes front and rear drive shafts and yoke flanges
• 1310 U-joints
• Dynamically balanced to eliminate vibration
• Available from 15.5 to 38.5 inches long
• Recommended in vehicles with 3.5 inches or more of lift
• Billet aluminum flange
• California Residents: WARNING

Rubicon Express High Steer Kits

From $338.99

• The Jeep JK High Steer Kit. This kit brings your steering angles back into factory specs on 3.5?-5.5? lifted JK Wranglers. Included is a HD drag link made from solid bar for maximum strength and utilizes an OE tie rod end for simple replacement should the end become worn out. The axle mounted track bar bracket accepts and allows for adjustment with the OE track bar while also relocating the steering stabilizer above the drag link.
• California Residents: WARNING

G2 Axle & Gear Brute Differential Covers

From $112.00

G2 Axle & Gear Replacement Axle Shafts

From $63.24

• High Strength Alloy Steel
• Heat treated
• Big spline options
• Rolled splines
• Wheel studs included
• California Residents: WARNING

Rubicon Express Extreme Duty Radius Long Arm Upgrade Kits

From $2,287.94

• Extreme Duty Radius Long Arm Upgrade Kit
• 4 Link Front/3 Link Rear
• California Residents: WARNING

Rubicon Express Control Arm Brackets

From $114.99

• Our control arm brackets are laser cut from 3/16 inch cold rolled steel and then CNC formed for unmatched precision and strength. These brackets are required for cleanly mounting a custom axle in your TJ.
• California Residents: WARNING