Smittybilt XRC Front Bumpers

From $498.99

• Two-stage textured matte black powdercoat finish
• 3/16 inch cold rolled steel
• One-piece welded design
• Raised corners for better entry and exit
• Built-in winch plate to accommodate up to a 12k winch
• 5-year limited warranty
• California Residents: WARNING

Smittybilt SRC GEN2 Front Bumpers

From $689.99

• Welcome to the Smittybilt SRC Gen2 Front Bumper for Jeep
• Solid d-ring and jack point mount - welded on the inside and out!
• Aggressive design for with raised corners for better entry and exit angles for the most extreme conditions
• Fender to fender protection
• 2 inch 120 Wall over rider and kickers
• Lower design winch plate allows greater air flow and rated to accommodate up to 12k winch
• O.E. fog light provision
• Manufactured from 3/16 inch cold rolled steel
• Towable D-ring mounts
• Two-stage textured matte black powdercoat finish with 5-year limited warranty
• Smittybilt Advantage limited lifetime warranty: Great choice for a Wrangler front bumper
• California Residents: WARNING

Smittybilt M1 Front Bumpers

From $1,399.99

• Two stage matte Black finish powder coat finish
• Manufactured from 3/16 inch & 1/4 inch cold roll steel
• Ultra Bright Driving & Fog Lights
• Solid Mount D-Rings - Welds on the inside and out
• Solid plate center section that wraps the frame horns and lower cross member
• Smittybilt Advantage Warranty - Limited Lifetime Warranty
• California Residents: WARNING

Smittybilt SRC Front Bumpers

From $299.99

• Two-stage textured matte black powdercoat finish
• 2 tabs to mount lights
• Wide opening allows for winch installation
• 1/4 inch thick custom mounting brackets
• Welded d-ring tabs
• 5-year limited warranty
• California Residents: WARNING

Smittybilt XRC Atlas Front Bumpers

From $799.99

• Two stage textured matte black finish
• Innovative 3-piece design
• Lower design winch plate allowing greater air flow
• Manufactured from 3/16 inch cold rolled steel
• Bumper bolts directly to your vehicle
• Two 3/4 inch d-ring mounts
• 5 year limited warranty
• California Residents: WARNING

Smittybilt XRC GEN1 Front Bumper

From $529.99

• Two stage matte black powder coat finish
• Manufactured from 3/16" cold roll steel
• 1.75" 120 wall over rider and kickers
• Raised corners for better entry and exit under the most extreme conditions
• Solid mount D-Rings - Welds on the inside and out
• Solid plate center section that wraps the frame horns and lower cross member
• Built-in winch plate to accommodate up to 10k winch
• One-piece welded design
• 5-year limited warranty
• California Residents: WARNING

Smittybilt XRC Rock Crawler Winch Bumpers

From $429.99

• 2-stage Textured black powder coat
• Degree approach angles and raised corners
• 3/16 inch cold rolled steel
• Stinger is 1.75 inch tubing
• Accepts up to two 9 inch lights
• Bumpers bolt directly to your vehicle
• 5-year limited warranty
• California Residents: WARNING

Smittybilt SRC Classic Rock Crawler Front Bumpers

From $187.99

• Two-stage textured matte black powdercoat finish
• 1/4 inch steel plate design
• Zinc undercoat
• Bumpers bolt directly to your vehicle
• Requires no drilling or modifications
• 5-year limited warranty
• California Residents: WARNING

Smittybilt SRC Front Stinger Bumpers

From $7,469.99

• Textured black finish
• Manufactured from 2 inch DOM 120 steel tubing and 3/16 inch cold rolled steel
• D-ring mounts welded inside and out
• Can be used with various winch plates
• California Residents: WARNING

Rugged Ridge XHD Front Bumpers

From $449.99

• Black powder coat
• Steel
• California Residents: WARNING

Rugged Ridge Tube Bumpers

From $279.99

• Rugged Ridge 3 inch tube Jeep fromt bumper
• Available in 04 Stainless Steel or Black Powder Coat
• 1.2mm thick 3-inch tubular steel
• Includes end caps
• Available with center hoop, winch mount, light mounts
• Ideal Jeep front bumper
• California Residents: WARNING

Warrior Mid-Width Front Bumpers

From $1,491.99

• Warrior’s heavy-duty Mid-Width Front Bumper with Fog Light Mounts is designed for the off-road enthusiasts
• Constructed from high-quality steel, bumpers are black powder-coated for lasting durability and good looks.
• The optional Brush Guard is a one-piece welded guard that is formed from 1 1/2 inch round steel tubing, and provides protection from shrubbery when off-roading to the front grill and headlights.
• NOTE: OEM Fog Lights NOT Included. D-Ring Shackles Sold Separately.
• California Residents: WARNING

Smittybilt XRC Front Bull Bars

From $117.99

• Two-stage textured matte black powdercoat finish
• Requires front bumper part number S/B76810
• Manufactured from 1.75 inch tubing
• Two light tabs that can accommodate up to a 9 inch light
• Capable of mounting up to a 15,000 lb. winch
• 5-year limited warranty
• California Residents: WARNING

Wilco Offroad Replacement Front Bumpers

From $306.83

• Innovative new replacement bumpers offer high-strength and reduced weight
• 57 pound complete standard bumper
• Protects the vehicle, reduces weight
• Steel slides better over rock than aluminum
• California Residents: WARNING

Smittybilt XRC Gen2 Front Bumpers

From $719.99

• UHMW (ultra-high-molecular-weight polyethylene) to provide the ultimate protection for rock crawling
• Manufactured from 3/16-inch cold rolled steel with two-stage textured matte black finish
• Powdercoat finish - 5 year limited warranty
• Smittybilt limited lifetime warranty
• Lower design winch plate allows greater air flow and rated to accommodate up to 12k winch
• 1.75" diameter .120 wall overrider and kickers
• O.E. fog light provision and towable D-ring mounts
• California Residents: WARNING

Rugged Ridge XOR Front Bumpers

From $349.99

• Built from 5mm-thick steel plate
• Built-in skid plate
• Integrated top-mount winch plate
• Massive 1”-thick shackle mounts
• Accommodates 3/4-inch shackles (not included)
• Recessed fog light pockets
• Works with standard OE fog lights
• Does not work with Altitude or LED fog lights
• Bolt-on installation
• Mounting hardware included for installation
• No drilling or cutting required

Smittybilt Stryker Front Bumper

From $679.99

• 3mm deep drawn formed steel
• Winch compatible up to 12k
• Modular wings sold separately
• Includes light provisions
• Inegrated d-ring and lift points
• OE fog light provision
• Integrated overrider with 13" lightbar provision

Smittybilt Adventure Series Front Bumpers

From $1,169.99

Rugged Ridge Venator Front Bumpers

From $1,099.99

• Muscular stamped steel construction
• Patented design features sculpted contours and sweeping arches
• Features built-in winch plate and massive 1-inch thick recovery hooks
• Octagonal pockets accept factory JL / JT fog lights
• Easy bolt-on installation

Rugged Ridge Arcus Front Bumpers

From $599.99

• High-strength 11-gauge steel shell surrounding a 1/4-inch thick steel winch plate
• Capable of holding most model winches up to a 12.5k lb. rating
• Accepts Hawse or roller-style fairleads
• Massive 1-inch thick recovery hooks
• Each hook is dual cross-drilled so they accept both 7/8 and 3/4-inch D-rings
• Built-in fog light pockets
• Accepts both factory Sport & Sahara fog light assemblies with no modification
• High-quality satin black powder coat finish with a fine texture

Rugged Ridge HD Front Bumpers

From $549.99

• Available in Stubby or Full Width
• Engineered to mount most any aftermarket winch
• Built-in jack lifting points at every corner
• Massive recovery hooks, each one dual-drilled to work with both 3/4 and 7/8-inch shackles
• Satin black powder coat finish
• Limited 5-year warranty

Rugged Ridge Spartan Front Bumpers

From $379.99

• One-piece design
• Features ultra-aggressive high clearance bumper ends that angle cleanly upward to match the profile of factory fender flares
• Built from high-strength plate steel that utilizes fold & weld construction for greater structural integrity, precise fit and a high-quality appearance
• Rugged textured black powder coat resists rust and corrosion
• Incorporates a stand-alone winch plate as the central backbone for the bumper
• Includes D-shackle mounts
• Direct bolt-on replacement for 2007-2020 Wrangler JK, Wrangler JL and Gladiator JT models
• Includes all the necessary hardware for a worry-free installation
• California Residents: WARNING

Smittybilt Apollo Front Bumper

From $809.99

• High and tight design for maximum clearance
• 1.5" x .120" wall structural tubing with 1/8" and 3/16" laser cut cold rolled sheet metal
• Removable overrider with front camera provision
• Winch compatible up to 12K
• Fits all non-Rubicon model OE fog lights
• D-ring recovery and jack points