Rugged Ridge XHD Front Bumpers

A: Yes, you can. I have a 12,000 mounted on mine and no issues with interference or mounting.

A: You would also need 11540.40. This RRC mount attaches to the 11540.40 XHD modular front bumper.

A: It is textured black finish.

A: Hi AL, This Rugged Ridge Short Base Winch Mount Bumper Center Section works great with the Smittybilt X20 synthetic winch with no issues. Thanks for your inquiry.

A: None, The D-rings are interchangeable and come in many colors, you will need a 3/4 inch d-ring

A: Hi Michael, This Rugged Ridge Double X Striker for Front Modular Bumper is the striker bar/grill guard protector that mounts to the modular bumper made by Rugged Ridge, so you'll need that bumper for this striker to fit on. Here's the bumper, thanks for your inquiry. http://www.4wd.com/Jeep-Bumpers-Jeep-Tire-Carriers/All-Terrain-Modular-Front-Bumper.aspx?t_c=64&t_s=26&t_pt=6410&t_pn=RUG11542.01

A: Hi Greg, This Rugged Ridge XHD Front Bumper Kit, Striker/Standard uses the 3/4" d-rings, here they are and thanks for your interest.http://www.4wd.com/Jeep-Winches-Jeep-Winch-Accessories/3-4-inch-D-Ring-Shackle.aspx?t_c=18&t_s=124&t_pt=6073&t_pn=S/B13047R

A: Hi Joseph The XHD Front Stubby Bumper Kit with Striker Bar is a direct bolt on bumper. Thanks

A: Hey RebsForLife, the Rugged Ridge XHD Bumper Base, Winch Mount, No D-Rings is a direct bolt on bumper no drilling. Thanks for your question.

A: Hi BG, This Rugged Ridge Short Base Light Mount Bumper Center Section comes with the OEM fog light provisions for the Jeep JK Wranglers up through the 2016 models. Great question, thanks for your inquiry.

A: Rebsforlife, the Rugged Ridge XHD Front Bumper Kit, Striker/High Clearance doesn't have any mounting tabs on it. You will want to check out the X clamps from Rugged Ridge located here: http://www.4wd.com/Jeep-Lighting-Jeep-Lighting-Accessories/X-Clamps-in-Gloss-Black-1-25-2-.aspx?t_c=14&t_s=451&t_pt=3161&t_pn=RUG11031.02. Hope this helps!

A: Hey E, the Rugged Ridge XHD Front Bumper Kit, Striker/Standard does not have an built in Hi-Lift mount on it. You would need to get a Hi-Lift tube mount. Thanks for your question.

A: Hi Rick, This Rugged Ridge Short Base Winch Mount Bumper Center Section bumper holds the Warn VR 1000 winch with no fitment problems. Thank you for your inquiry.

A: Tony, There is no cutting required for the Rugged Ridge Double X Striker for Front Modular Bumper. Please let us know if you have any other questions. Thanks!

A: Hi Eddie, This Rugged Ridge Double X Striker for Front Modular Bumper fits great on the Rugged Ridge modular bumpers, both steel or aluminum. Here's the bumper, thank you for your inquiry. http://www.4wd.com/Bumpers-Tire-Carriers-Winch-Mounts/.aspx?t_c=64&t_s=26&t_pt=6410&t_pn=RUG11542.02

A: Hi Tim, This Rugged Ridge Double X Striker for Front Modular Bumper mounts to the Rugged Ridge modular bumper, not the Jeeps stock bumper Here's the bumper, the end caps are a separate item. Thanks for your inquiry. http://www.4wd.com/Bumpers-Tire-Carriers-Winch-Mounts/XHD-Front-Bumper-Base-with-Tow-Point-Covers.aspx?t_c=64&t_s=26&t_pt=6410&t_pn=RUG11540.28

A: Hi Tim, This Rugged Ridge Double X Striker for Front Modular Bumper mounts to the Rugged Ridge Modular bumper. That bumper will accept the OEM fog lights but there are no light tabs on the bumper or this striker bar. Thanks for your inquiry.

A: Randy, the Rugged Ridge Short Base Winch Mount Bumper Center Section measures 42x14x11 and weighs 76lbs. This is just the bumper and d rings and mounts. The winch and fairlead will be separate and that will be whichever winch you go with. You will want something like the Smittybilt XRC line or the Rugged Ridge winches. The bumper is in stock at Rugged Ridge. Hope this helps!

A: Hello Nick, Any 8,000 to 10,000 pound winch with the exception of the Warn 8274 and Powerplant winches. Thank you for the question.

A: Hello green, The Rugged Ridge Stinger Over-rider for Modular Front Bumper maybe able to mount to a Smittybilt XRC bumper, but they are not designed by the same company. Some modifications maybe required.

A: Marc, this stinger uses 3/4 D-ring shackles. thank you for your question.

A: Joe, The holes in the front of the bumper appear to be fog light ready but there are no brackets or brackets available for fog light mounting from Rugged Ridge at this time for this bumper. Hope this helps!

A: Joe, the Rugged Ridge XHD Bumper Base, Winch Mount, No D-Rings will fit your 2015. Let us know if you have any other questions!

A: Captain Sharky, unfortunately I don't have any of the Rugged Ridge Stinger Over-rider for Modular Front Bumper at my location to measure. Depending on what you plan on putting this on one of my sales techs can get you fixed up if you give us a call. Hope this helps!

A: Hello J and thank you for your question! Rugged Ridge Short Base Winch Mount Bumper Center Section is set up to take the OEM fog lights.

A: Hello keith and thank you for your question! Here is the link for the install instructions for the Rugged Ridge XHD Aluminum Front Bumper Over-Rider Hoop http://www.4wheelparts.com/aux_incl/pdf.ashx?pdf=11541.14.pdf&line=RUG

A: Hello Gordon and thank you for your question! Rugged Ridge Short Base Light Mount Bumper Center Section part number RUG11540.11 is a XHD non winch front bumper. Use RUG11540.10 for the short base winch mount bumper.

A: Kirk, the Rugged Ridge Double X Striker for Front Modular Bumper weighs 37 pounds. I hope this helps!

A: Hi Kirk, This winch mount bumper weighs 52 lbs. Thanks for the inquiry!

A: Hello there, thank you for this simply error. The Rugged Ridge Xtreme Heavy Duty Aluminum Winch Mount Bumper part number RUG11541.01 will require the JK Winch mounting plate (Steel Plate) part number 11541.13. Steel winch plate allows you to mount the most popular winches to the All Terrain and XHD aluminum front bumpers. Fits 07-14 Jeep Wrangler (JK)

A: Hello Acorb, the Rugged ridge Front bumper will not be a direct bolt on with your baseplate. You will need to modify the bumper and/or the baseplate to make them work together. Thank you for your inquiry.

A: Juan, the Rugged Ridge Short Base Winch Mount Bumper Center Section is ready to mount a winch in it out of the box. Hope this helps!

A: Kevin, the Rugged Ridge XHD Aluminum Front Bumper Over-Rider Hoop will not accommodate a Zeon winch. Due to the larger size of the Zeon model it will not clear the width of the hoop. Hope this helps!

A: Hello Matt, Thank you for the question. You will not need to relocate the vacuum pump to install this bumper on your vehicle.

A: Scott- Thanks for the question. You would need to remove the full width endcaps to be able to use the Rugged Ridge RRC Front End Mount on your XHD modular front bumper

A: Hello yi, Thank you for the question. This bumper is not winch ready.

A: Hello Rhoadsie, This bumper does not have a license plate mount. However if you are running a winch you can get the fairlead license plate mount. If you have anymore questions feel free to ask, Thank you.

A: Finny- Thanks for asking. Yes the Rugged Ridge Xtreme Heavy Duty Aluminum Winch Mount Bumper does come with winch plate

A: Hello Justin, the Rugged Ridge Short Base Center Section Winch Mount Bumper weighs in at 75 pounds. Please let us know if you have any other questions, thanks.

A: Hello Dunn, Thank you for the question. Yes, the Rugged Ridge XHD Aluminum Front Bumper Over-Rider Hoop will fit your vehicle application.

A: Thank you for the inquiry jdub79. Yes, we do carry the XHD Over Rider Hoop and the Standard Bumper Ends for the Rugged Ridge Short Base Light Mount Bumper Center Section part number RUG11540.11. The Hoop Over-rider for Modular Front Bumper part number RUG11540.14 is located here: http://jo.my/xhdoverriderhoop The Standard Bumper Ends part number RUG11540.12 is located here: http://jo.my/standardbumperends

A: Hello Tumbler, Thank you for the question. You will need to use the Hi-Lift bumper accessory on the Rugged Ridge Short Base Winch Mount Bumper Center Section RUG11540.10

A: Hi Eddie! After speaking with Rugged Ridge, they state the the tube diameter of this hoop is 2.25 inches, so that should be the size you need to go with.

A: Swiese- Thanks for the question. Yes we do have the vacuum pump relocating kits you need to install this Rugged Ridge short base winch mount bumper. You can find it here http://jo.my/g26kmm

A: Kelblanc- Thanks for the inquiry. According to Rugged Ridge you will need a vacuum pump relocation kit to install the Short Base Winch Mount Bumper Center Section on your 2014 Jeep Wrangler Unlimited Rubicon

A: The Rugged Ridge XHD Aluminum Front Bumper Over-Rider Hoop bolts only to the XHD modular bumper so you would not be able to mount it without it.

A: Hello, The 2012 JK Unlimited has to have the vacuum pump relocated and a relocation bracket needs to be purchased for any aftermarket bumper to fit properly. part# ORF87046 can be found here: jo.my/jk_vacuumpump_relocation ? Thank you!

A: Yes, you should have no problem installing a Smittybilt XRC 8 winch on this Rugged Ridge Short Base Winch Mount Bumper Center Section. The Hoop Over-rider should fit well over the winch, as the winch mounting plate is recessed. Thanks!

A: Joe, yes this Rugged Ridge Short Base Light Mount Bumper Center Section can accommodate the bumper ends along with the different style grill guards. They can all be found here. End Caps = http://jo.my/standard_ends Hoop = http://jo.my/over_rider Modular Stinger = http://jo.my/modular_stinger RRC Front End = http://jo.my/rrc_front_end_mount

A: Hello! You can use up to a 3/4" D-Ring on the Rugged Ridge Stinger Over-rider Bar. You can select D-Rings from here: http://www.4wd.com/Jeep-Winches-Jeep-Winch-Accessories/Jeep-D-Shackles.aspx?catID=18&subCat=124&ptID=6073&pg=3 Thank you!

A: For the automatic transmission you would need to order the vacuum pump relocation bracket Part Number 76723. For a manual transmission you should be ok.