Smittybilt SRC GEN2 Rear Bumpers

From $629.99

• Smittybilt SRC Gen2 Jeep rear bumper is covered in Two-stage textured matte black powdercoat finish
• UHMW (ultra-high-molecular-weight polyethylene) to provide the ultimate protection for rock crawling
• Manufactured from 3/16-inch cold rolled steel
• Smittybilt limited lifetime warranty
• LED lights included
• Modular design tire carrier can be added (sold separately) to the Wrangler rear bumper
• Fender-to-fender protection
• Aux back up light cut out provided
• Class III hitch for true towing with towable D-ring mounts
• Anti-rattle provision provided for receiver hitch
• Works with XRC GEN2 tire carrier (#76857)
• California Residents: WARNING

Smittybilt SRC GEN2 Front Bumpers

From $689.99

• Welcome to the Smittybilt SRC Gen2 Front Bumper for Jeep
• Solid d-ring and jack point mount - welded on the inside and out!
• Aggressive design for with raised corners for better entry and exit angles for the most extreme conditions
• Fender to fender protection
• 2 inch 120 Wall over rider and kickers
• Lower design winch plate allows greater air flow and rated to accommodate up to 12k winch
• O.E. fog light provision
• Manufactured from 3/16 inch cold rolled steel
• Towable D-ring mounts
• Two-stage textured matte black powdercoat finish with 5-year limited warranty
• Smittybilt Advantage limited lifetime warranty: Great choice for a Wrangler front bumper
• California Residents: WARNING

Smittybilt Pivot HD Oversize Tire Carriers

From $249.99

• Smittybilt strong monocoque aluminum construction eliminates tailgate sag with this Jeep spare tire carrier
• Adjustable tire mount with 37 inch maximum tire size
• Increases load carrying capacity to 135 lbs with this Jeep tire carrier
• Forged chrome mounting brackets ? 30% stronger than steel
• Third brake light mount included
• Protective EPDM gaskets included to protect factory finish
• S/B2740-03 optional brackets to mount trail jack
• Maintains the easy single action of opening and closing of the tailgate
• No drilling required - you can maintain OE bumpers, if preferred
• California Residents: WARNING

Smittybilt M1 Front Bumpers

From $1,399.99

• Two stage matte Black finish powder coat finish
• Manufactured from 3/16 inch & 1/4 inch cold roll steel
• Ultra Bright Driving & Fog Lights
• Solid Mount D-Rings - Welds on the inside and out
• Solid plate center section that wraps the frame horns and lower cross member
• Smittybilt Advantage Warranty - Limited Lifetime Warranty
• California Residents: WARNING

Smittybilt SRC Front Bumpers

From $299.99

• Two-stage textured matte black powdercoat finish
• 2 tabs to mount lights
• Wide opening allows for winch installation
• 1/4 inch thick custom mounting brackets
• Welded d-ring tabs
• 5-year limited warranty
• California Residents: WARNING

Smittybilt XRC Atlas Rear Bumpers

From $1,119.99

• Smittybilt Wrangler rear bumper is coated in a two-stage textured matte Black finish
• Hitch
• Available with and without Tire carrier
• Smittybilt limited lifetime warranty on this Jeep rear bumper
• California Residents: WARNING

Smittybilt XRC GEN1 Rear Bumpers

From $439.99

• Two stage matte Black powder coat finish
• Manufactured from 3/16" cold rolled steel and then robotically welded to the exact specifications
• 5-year limited warranty
• California Residents: WARNING

Smittybilt SRC Rear Bumpers

From $299.99

• Smittybilt SRC Wrangler rear bumper is covered in a two stage textured black powder coat finish
• Dense zinc treated undercoating
• Expertly robotically welded
• Bumpers bolt directly to your vehicle
• Available with or without d-rings
• Jeep rear bumper is available with and without tire carrier
• California Residents: WARNING

Smittybilt SRC Classic Rock Crawler Front Bumpers

From $187.99

• Two-stage textured matte black powdercoat finish
• 1/4 inch steel plate design
• Zinc undercoat
• Bumpers bolt directly to your vehicle
• Requires no drilling or modifications
• 5-year limited warranty
• California Residents: WARNING

Smittybilt Tire Relocation Brackets

From $57.99

• Textured black
• Clear up to 35 inch tire
• California Residents: WARNING

Addictive Desert Designs HoneyBadger Front Bumpers

From $1,998.18

• Black powder coat
• Made to mold the front of your truck
• 3/16 inch mild steel construction
• Aluminum skid plate
• Side panel inserts
• Winch options
• D-ring mounts
• Multiple lighting options
• California Residents: WARNING

Addictive Desert Designs Stealth Fighter Front Bumpers

From $1,008.78

• Laser Cut Skid plates, Tabs and Plates for a Precise Fit
• Direct fit – No Cutting or Welding required
• Stainless Steel Hardware
• California Residents: WARNING

Addictive Desert Designs Honeybadger Rear Bumpers

From $1,571.38

• Lockable Storage Space
• Bumper Color: Hammer Black
• Panel Color: Satin Black
• Light Mounts
• Made in the USA
• California Residents: WARNING

Addictive Desert Designs Stealth Fighter Rear Bumpers

From $1,260.98

• 3/16 inch and 1/8 inch Plate used to strengthen and reduce weight
• Laser Cut Skid plates, Tabs and Plates for a Precise Fit
• Direct fit – No Cutting or Welding required
• California Residents: WARNING

Addictive Desert Designs Venom Rear Bumpers

From $1,862.38

• .120 inch Wall Steel Tube Construction
• Laser Cut Skid plates, Tabs and Plates for a Precise Fit
• Direct fit – No Cutting or Welding required
• Stainless Steel Hardware
• California Residents: WARNING

Smittybilt Bumper Brackets and Adapters

From $79.99

• Two stage textured matte black finish
• Enables you to mount Wrangler bumpers onto other modelsl
• Easy bolt on design
• Includes all parts necessary for proper installation

Smittybilt XRC Front Bull Bars

From $117.99

• Two-stage textured matte black powdercoat finish
• Requires front bumper part number S/B76810
• Manufactured from 1.75 inch tubing
• Two light tabs that can accommodate up to a 9 inch light
• Capable of mounting up to a 15,000 lb. winch
• 5-year limited warranty
• California Residents: WARNING

Addictive Desert Designs Stealth Rear Bumpers

From $1,551.98

• Constructed of .120" Wall Steel Tube
• Includes Laser Cut Skid plates, Tabs and Plates for a Precise Fit
• Direct fit – No Cutting or Welding required
• All Stainless Steel Hardware Included
• Cutout for Back Up Sensors
• Made in the USA
• **A.D.D. Rear Bumpers are designed to work with Factory Tow Equipment**
• California Residents: WARNING

Addictive Desert Designs Bomber Front Bumpers

From $1,939.98

• Modern plate steel design
• Full 3/16” aluminum skid plate
• Weighs less than the OEM front bumper
• Mounts for 3 Baja Designs LP6 round lights or 4 RIGID 360 6" round lights
• Retains OEM tow hooks
• Fully bolt-on
• Made in America

Smittybilt XRC Gen2 Rear Bumpers

From $599.99

• UHMW (ultra-high-molecular-weight polyethylene) to provide the ultimate protection for rock crawling
• Manufactured from 3/16-inch cold rolled steel with two-stage textured matte black finish
• Powdercoat finish - 5 year limited warranty
• Smittybilt limited lifetime warranty
• LED lights included
• Modular design tire carrier can be added (sold separately)
• Fender-to-fender protection
• Aux back up light cut out provided
• Class III hitch for true towing with towable D-ring mounts
• Anti-rattle provision provided for receiver hitch
• Works with XRC GEN2 tire carrier (#76857)
• California Residents: WARNING

Addictive Desert Designs Bomber Rear Bumpers

From $1,648.98

• Hammer black powder coat finish
• Satin black powder coat panel finish
• Modern plate steel design
• Compliments factory dovetail styling
• Made in the USA

Smittybilt Adventure Series Front Bumpers

From $1,169.99

Addictive Desert Designs Universal Spare Tire Carriers

From $649.88

• Universal application - fits all pickup trucks
• Requires drilling holes into bed
• Hammer black powder coat finish
• Fits a 33" to 40" tire
• Fits up to 14" actual tire width

Addictive Desert Designs Rock Fighter Rear Bumpers

From $1,542.28

• Hammer black powder coat finish
• Parking sensor cutouts
• Retains the OEM tire mount and backup camera
• Allows for 37-inch spare tire
• Retains both the OEM hitch and license plate light
• Two reinforced clevis mounts for 3/4-inch D-rings