Smittybilt XRC GEN1 Rear Bumpers

A: Yes it does but no instructions on how to install it and no hardwarre specifically for it.

A: YES IT HAS BOTH

A: No, you use the stock 3rd brake light. It uses most of the original hardware to install with a few extra included bolts.

A: It comes with a bracket you could attach the light to. However, you'd have to reroute the wiring to the swing out. I chose not to use that and instead bought an adjustable bracket to keep the light on the tailgate.

A: I can only tell you that it will work with the factory tire carrier with the factory tire.i changed to an aftermarket tire carrier when i put a larger spare on because my old jeeps tailgate stress cracked from the weight of the spare tire.

A: No, you will need to get a tire carrier spacer for the spare tire to fit with this bumper 

A: a few vids I've seen on this bumper show 2large nut plates inserted into the two rails, mine didn't come with them. Are they not needed anymore or do they look different? I think I'm missing them. I've em'd INFO¬hing back. NEone buy in 2022?

A: For immediate assistance during normal business hours INFO@SMITTYBILT.COM

A: It sure does Greg.

A: Yes it does.

A: Yes it holds a 37 inch tire

A: Yes - Max tire size: 37"

A: You open it separately. 

A: You will have to open the door after the swing arm (spare tire) is open.

A: Yes

A: We would recommend an aftermarket carrier in order to run a 35” spare as it may not work the stock tire carrier.

A: I’m running 37s with no issues.

A: Yes they will fit fine.

A: The hitch is actually recessed from the edge of the bumper. I have a 35" BFG on the back and from the end of the hitch to clear the tire is a minimum 9 inches. So you would need something that was at least a foot or foot and a half to not rub on the tire.

A: The hitch is only about 1” past edge of bumper, and from tailgate to outer edge of bumper is approx. 9”

A: Yes it is. That’s what I have. I think it can even do 37

A: I've had this bumper on two jeeps, one with 35s and one with 37s. The bumper/tire carrier has no problem with either.

A: The Smittybilt XRC Gen1 Rear Bumper - 77855 weighs 111 lbs.

A: Your best bet will be to have yours welded. I wanted to add the tire carrier to my Gen 1 but it wasn't available by itself.

A: Yes it will.

A: Yes this bumper can be used with the SRC roof rack that is frame mounted.

A: Not sure - it would depend on the tire and wheel combo you are running.

A: Max tire size for this tire carrier is 37"

A: Shipping weight for 76855 is 107 lbs Shipping weight for 76856 is 190 lbs

A: This bumper has a textured finish, Thanks!

A: Yes, the Smittybilt XRC Gen1 Rear Bumper - 77855 should work with the SRC Defender Roof Rack.

A: Yes, the Smittybilt XRC Gen1 Rear Bumper - 77855 includes the parking/backup sensor holes.

A: It does not. Check out part number S/B7743 HD pivot to match with this bumper.

A: Hey Tom. The relocate bracket is sold separately, Please refer to: https://www.4wheelparts.com/b/bumpers/tire-carriers/_/N-cm4ew Thanks

A: Hi, The Smittybilt XRC Gen 1 Rear Bumper with Hitch (Black) - 76855 does not come with D rings. Great question!

A: Hello Josh, Yes, this bumper will fit, however you will need to remove the factory hitch. Thank you for the question.

A: Hello nuggethunter, Sorry, this unit does not offer a gas can mount. We recommend the Smittybilt XRC Atlas Rear Bumper and Tire Carrier Part Number: S/B76896 for gas cans mounts. Thank you for the question.

A: Hello Matt, With the factory wheel and tire installed on the Smittybilt XRC Armor Rear Bumper with Hitch and Tire Carrier, the XRC is 1" narrower than the stock unit.

A: Thanks for the inquiry kyle, the Smittybilt XRC Armor Rear Bumper with Hitch and Tire Carrier part # S/B76856 we carry a cover for it part # RANRS6237B.

A: Hello Page, the Smittybilt XRC Armor Rear Bumper with Hitch part# S/B76855 is not designed to add a tire carrier. You would need to purchase the bumper/ carrier combo because it is a slightly different bumper. Thank you for your inquiry.

A: Hello there, the Smittybilt XRC Armor Rear Bumper with Hitch will fit the OE tire carrier as long as it wasn't attached to the bumper. Shop with us anytime, on your schedule. Browse 4WheelParts.com, call our customer service center, or come visit us in one of our stores. You can even save on shipping costs by shopping online and picking your order up in a store. No matter which method you prefer, we’re ready to help with excellent parts, advice, and service.

A: Thanks for the inquiry Ridehd1, the Smittybilt XRC Armor Rear Bumper with Hitch and Tire Carrier part # S/B76856 will fit a 2011 JK and features pressed tapered 2" diameter bearings.

A: Thanks for the inquiry Bart, the Smittybilt XRC Armor Rear Bumper with Hitch and Tire Carrier part # S/B76856 smittybilt is our brand, please contact them direct they will send you a new handle. 800-776-0767.

A: Thanks for the inquiry Vince, the Smittybilt XRC Armor Rear Bumper with Hitch and Tire Carrier part # S/B76856 comes with the 3rd brake light bracket. http://jo.my/1ijo7p

A: East Bay Erik, Thank you for asking. The Smittybilt XRC Armor Rear Bumper with Hitch is rated as a class 3, Up to 6,000 pounds towing capacity, 350 to 600 pounds tongue weight. Just double check your vehicle's weight rating before you start towing so you don't exceed the ratings of your jeep.

A: Hello Mel, the Smittybilt XRC Armor Rear Bumper with Hitch and Tire Carrier part# S/B76856 is a class 3 receiver rated at 5000 pounds. Thank you for your inquiry.

A: Bjp- Thanks for asking. You would need to fabricate a Jack mount for the Smittybilt XRC Armor Rear Bumper with Hitch and Tire Carrier to mount your Hi-Lift jack.

A: Mitch- Thanks for the question. You can order the tire carrier separately it is part number S/B76856-02 and is $220.99

A: David- Thanks for the question. The Smittybilt XRC Armor Rear Bumper with Hitch and Tire Carrier weighs 188 lbs.

A: Jim- Thank you for your question. The Smittybilt XRC Armor Rear Bumper with Hitch and Tire Carrier can be separated from the tire carrier. You can remove it for maintenance, repair of to save weight.

A: Hello Tyler, Thank you for the question. You can fit a 3/4" D-Ring on this bumper.

A: Hello Mark, Thank you for the question. This bumper can carry up to a 37x12.50

A: Genny- Thank you for your question. The Smittybilt XRC Armor Rear Bumper with Hitch will allow the mounting of a larger spare you will need the oversize tire spacer http://jo.my/6osm91 to mount up to a 35" tire. Remember, the factor say that your tire carrier will only handle up to 50lbs.

A: Thank you for your question. The Smittybilt XRC Armor Rear Bumper with Hitch and Tire Carrier part number S/B76856 does have a 2 inch receiver for towing and D-Rings.

A: Thank you for your question Virginie. The Smittybilt XRC Armor Rear Bumper with Hitch part number S/B76855 will not fit a Toyota FJ Cruiser. Here is a link to an ARB Toyota FJ Cruiser Rear Hitch Bumper in Black Powder Coat that will fit http://jo.my/arb5620010