A: I can only tell you that it will work with the factory tire carrier with the factory tire.i changed to an aftermarket tire carrier when i put a larger spare on because my old jeeps tailgate stress cracked from the weight of the spare tire.

A: No, you will need to get a tire carrier spacer for the spare tire to fit with this bumper 

A: It sure does Greg.

A: Yes it does.

A: I’m running 37s with no issues.

A: Yes they will fit fine.

A: The hitch is actually recessed from the edge of the bumper. I have a 35" BFG on the back and from the end of the hitch to clear the tire is a minimum 9 inches. So you would need something that was at least a foot or foot and a half to not rub on the tire.

A: The hitch is only about 1” past edge of bumper, and from tailgate to outer edge of bumper is approx. 9”

A: Yes. We have used ours for over a year now with no issues. Easy to install and works great

A: The Smittybilt XRC Gen 1 Rear Bumper with Hitch (Black) - 76855 weighs 107 lbs.

A: D-ring Mounts are drilled for 7/8. 3/4 size shackle should be sufficient for the rating of the vehicle. Smittybilt 3/4" Quick Disconnect D-Ring Shackle (Black) - PN: S/B13049B

A: Your best bet will be to have yours welded. I wanted to add the tire carrier to my Gen 1 but it wasn't available by itself.

A: Yes it will.

A: Shipping weight for 76855 is 107 lbs Shipping weight for 76856 is 190 lbs

A: This bumper has a textured finish, Thanks!

A: Hi, The Smittybilt XRC Gen 1 Rear Bumper with Hitch (Black) - 76855 does not come with D rings. Great question!

A: Hello Page, the Smittybilt XRC Armor Rear Bumper with Hitch part# S/B76855 is not designed to add a tire carrier. You would need to purchase the bumper/ carrier combo because it is a slightly different bumper. Thank you for your inquiry.

A: Hello there, the Smittybilt XRC Armor Rear Bumper with Hitch will fit the OE tire carrier as long as it wasn't attached to the bumper. Shop with us anytime, on your schedule. Browse 4WheelParts.com, call our customer service center, or come visit us in one of our stores. You can even save on shipping costs by shopping online and picking your order up in a store. No matter which method you prefer, we’re ready to help with excellent parts, advice, and service.

A: East Bay Erik, Thank you for asking. The Smittybilt XRC Armor Rear Bumper with Hitch is rated as a class 3, Up to 6,000 pounds towing capacity, 350 to 600 pounds tongue weight. Just double check your vehicle's weight rating before you start towing so you don't exceed the ratings of your jeep.

A: Genny- Thank you for your question. The Smittybilt XRC Armor Rear Bumper with Hitch will allow the mounting of a larger spare you will need the oversize tire spacer http://jo.my/6osm91 to mount up to a 35" tire. Remember, the factor say that your tire carrier will only handle up to 50lbs.

A: Thank you for your question Virginie. The Smittybilt XRC Armor Rear Bumper with Hitch part number S/B76855 will not fit a Toyota FJ Cruiser. Here is a link to an ARB Toyota FJ Cruiser Rear Hitch Bumper in Black Powder Coat that will fit http://jo.my/arb5620010