Rings & Pinions

Putting monster-sized wheels on your Jeep or SUV has consequences, including performance loss. Conquering roads with big tires isn't fun when your steering suffers. Ring and pinion gears work to seamlessly integrate larger tires so you can drive safely over every hill and around every corner. Choose from the industry's best brands like Alloy USA, Crown Automotive, Dana Spicer and Genuine Packages for quality that won't fail.

Unmatched Precision for Your Ride
4 Wheel Parts carries products made from the strongest steel and molded using cutting-edge engineering. Get superior gear by searching for the make and model of your car. You can find products manufactured to O.E. specifications so everything will fit and stay secure through the long haul. We even carry g2 gears that are double shot peened and double lapped for the utmost performance.

Parts for All Four Wheels
Most likely, you're not going to be upgrading just one tire. When you go big, you go all the way. 4 Wheel Parts carries Dodge ring and pinion gear sets that provide everything you need for both front and rear wheels. There's no need to shop separately for each wheel; save time and money by taking advantage of a wide range of sets and kits that will keep you tinkering in your garage for hours.

Get a Lifetime Warranty
A majority of ring and pinion products from 4 Wheel Parts have a superlative lifetime warranty. This means that if your steering malfunctions at any time, even a few years down the road, you can get a refund if the problem is traced to malfunctioning rings or pinions. The pros at 4 Wheel Parts understand you want mastery over your vehicle, not the other way around. We make part installation fun by providing you with top-notch products that work to give you a dependable ride to set fire to the streets. Discover what's in store by browsing our gigantic inventory today.

Gear Ratios
Changing your ring and pinion ratio is a way to maintain the factory efficiency of your vehicle even after you change the tires. Dana is one of our top-selling manufacturers of rings and pinions. When you are looking at Dana 30 ring and pinion sets, for example, remember that Old Gear Ratio × New Tire Size ÷ Old Tire Size = New Gear Ratio. While ring and pinion gears are sometimes not available in your New Gear Ratio, rounding up to the next available option keeps your vehicle operation at as-close-to-factory efficiency as possible. Another rule of thumb is that lower ratios, or 'taller gears' are good for mud bogging, as they allow for higher acceleration to keep your wheels spinning with efficient traction. Higher rations, or "shorter gears' provide higher fuel efficiency at a lower acceleration, which is better for rock crawling. Check out our Dana 44 gear ratio options.

Best Rates on the Market
When you order your parts form 4 Wheel Parts, you can be assured that you are getting the best quality gear for the lowest possible prices. If you find a lower price anywhere else within 90 days of your purchase, let us know and we will refund you the difference. We also offer many of our products with free shipping and discounts to our off-roaders who have served in the military. Buy your ring and pinion gears at 4 Wheel Parts today.

Optimum performance is necessary for off-road vehicles that have to traverse rocky, rugged or muddy terrain. Tire lifts can help you get there, but it s the ring and pinion gears that will really keep you going. You don t want to lose out on fuel efficiency or engine power because you changed the tires without changing the gears. The way your tires spin, or the ratio of turns between your drive shaft and your wheels, incomparably affects the way you experience the on- and off-road ride.

56 Product Groups

Switch to View Products

SORT BY

G2 Axle & Gear Dana 44 JK Ring and Pinion Sets

From $103.50

Dana 44 JK Ring and Pinion Sets
Forged from 8620 steel
Tight tolerances for easy setup and to maintain OE noise level specs
Lapped to give the mating surface a smooth finish to reduce friction that can lead to noise and excessive wear
California Residents: WARNING

From $103.50

5.0 5.0 (3)

G2 Axle & Gear Ring and Pinion Sets

From $108.00

Engineered and manufactured to handle increased load
Forged from high-strength 8620 Steel
Precision-machined to OE specifications for perfect mesh
Tight tolerances ensure easy set up and quiet OE-like operation
Double-lapped and shot-peened for improved longevity
Heat-treated for added durability
Wide application range from
Full 10-year warranty
California Residents: WARNING

From $108.00

3.9 3.9 (71)

G2 Axle & Gear Dana 30 JK Ring and Pinion Sets

From $131.99

Dana 30 JK Ring and Pinion Sets
Forged from 8620 steel
Tight tolerances for easy setup and to maintain OE noise level specs
Lapped to give the mating surface a smooth finish to reduce friction that can lead to noise and excessive wear
California Residents: WARNING

From $131.99

G2 Axle & Gear Dana 44 Ring and Pinion Sets

From $118.24

Dana 44 Ring and Pinion Sets
Forged from 8620 steel
Tight tolerances for easy setup and to maintain OE noise level specs
Lapped to give the mating surface a smooth finish to reduce friction that can lead to noise and excessive wear
California Residents: WARNING

From $118.24

4.7 4.7 (6)

G2 Axle & Gear Dana 30 Ring and Pinion Sets

From $109.99

Dana 30 Ring and Pinion Sets
Forged from 8620 steel
Tight tolerances for easy setup and to maintain OE noise level specs
Lapped to give the mating surface a smooth finish to reduce friction that can lead to noise and excessive wear
California Residents: WARNING

From $109.99

5.0 5.0 (2)

G2 Axle & Gear Dana 60 Ring and Pinion Sets

From $155.99

Dana 60 Ring and Pinion Sets
Forged from 8620 steel
Tight tolerances for easy setup and to maintain OE noise level specs
Lapped to give the mating surface a smooth finish to reduce friction that can lead to noise and excessive wear
California Residents: WARNING

From $155.99

G2 Axle & Gear Chrysler 8.25" Ring and Pinion Sets

From $104.00

Chrysler 8.25 Inches Ring and Pinion Sets
Forged from 8620 steel
Tight tolerances for easy setup and to maintain OE noise level specs
Lapped to give the mating surface a smooth finish to reduce friction that can lead to noise and excessive wear
California Residents: WARNING

From $104.00

G2 Axle & Gear Dana 35 Ring and Pinion Sets

From $115.49

Dana 35 Ring and Pinion Sets
Forged from 8620 steel
Tight tolerances for easy setup and to maintain OE noise level specs
Lapped to give the mating surface a smooth finish to reduce friction that can lead to noise and excessive wear
California Residents: WARNING

From $115.49

4.0 4.0 (1)

G2 Axle & Gear Ford 8.8" Ring and Pinion Sets

From $146.24

Ford 8.8 Inches Ring and Pinion Sets
Forged from 8620 steel
Tight tolerances for easy setup and to maintain OE noise level specs
Lapped to give the mating surface a smooth finish to reduce friction that can lead to noise and excessive wear
California Residents: WARNING

From $146.24

4.7 4.7 (3)

G2 Axle & Gear GM 12 Bolt Ring and Pinion Sets

From $240.49

GM 12 Bolt Ring and Pinion Sets
Forged from 8620 steel
Tight tolerances for easy setup and to maintain OE noise level specs
Lapped to give the mating surface a smooth finish to reduce friction that can lead to noise and excessive wear
California Residents: WARNING

From $240.49

G2 Axle & Gear AMC 20 Ring and Pinion Sets

From $146.99

AMC 20 Ring and Pinion Sets
Forged from 8620 steel
Tight tolerances for easy setup and to maintain OE noise level specs
Lapped to give the mating surface a smooth finish to reduce friction that can lead to noise and excessive wear
California Residents: WARNING

From $146.99

Dana Spicer Ring and Pinion Kits

From $1,206.99

Fits most 1996 and earlier standard rotation front and rear axles
For use with 3.54 and down carrier
Requires D/S706016X differential bearing kit to complete installation
Includes pinion bearings
Includes pinion seal
Includes pinion shim pack
Includes pinion preload shim pack or crush sleeve
Includes pinion nut
Includes differential shim pack
Includes ring gear bolts
Superior Metallurgy ensures more consistent, higher quality gears
Hobbed and shaved gearing provides optimal mating to minimize stress and maximize life
Precision heat-treating and shot-peening delivers consistent quality
California Residents: WARNING

From $1,206.99

4.5 4.5 (4)

Motive Gear Ring and Pinion Sets

From $1,499.99

Ring and Pinion Sets
Stock performance ring and pinions
Easy setup, superior strength, quality, and a vast ratio selection
Backed by rigid quality control processes
2 year / 100,000 mile no-nonsense warranty
California Residents: WARNING

From $1,499.99

3.8 3.8 (140)

G2 Ring and Pinions

From $100.00

G2 Axle & Gear Ring and Pinion
Engineered and manufactured to handle increased load
Forged from high-strength 8620 Steel
Precision-machined to OE specifications for perfect mesh
Tight tolerances ensure easy set up and quiet OE-like operation
Double-lapped and shot-peened for improved longevity
Heat-treated for added durability
Wide application range from
Full 10-year warranty
California Residents: WARNING

From $100.00

Dana Spicer Dana 44 4.10 Ratio Ring and Pinions

From $315.99

All Dana Spicer ring gear and pinion sets are designed and tested to meet original equipment specifications
Spicer gearing is manufactured with a special grade of steel, machined and heat-treated to precision, so you can count on optimum set-up and mating of the gears
Dana Spicer has conducted aggressive dynamometer tests to ensure exceptional performance of all of their genuine Spicer gearing
California Residents: WARNING

From $315.99

Dana Spicer Dana 44 4.88 Gears Ring and Pinions

From $297.99

All Dana Spicer ring gear and pinion sets are designed and tested to meet original equipment specifications
Spicer gearing is manufactured with a special grade of steel, machined and heat-treated to precision, so you can count on optimum set-up and mating of the gears
Dana Spicer has conducted aggressive dynamometer tests to ensure exceptional performance of all of their genuine Spicer gearing
California Residents: WARNING

From $297.99

Dana Spicer Dana 50 4.56 Ratio Ring and Pinions

From $219.99

All Dana Spicer ring gear and pinion sets are designed and tested to meet original equipment specifications
Spicer gearing is manufactured with a special grade of steel, machined and heat-treated to precision, so you can count on optimum set-up and mating of the gears
Dana Spicer has conducted aggressive dynamometer tests to ensure exceptional performance of all of their genuine Spicer gearing
California Residents: WARNING

From $219.99