A: Thanks for the inquiry chaz, the G2 Axle and Gear Ford 8.8in. 4.56 Ratio part # G/22-2013-456 for a 4x4 Bronco you have a dana 44 up front and you'll need part # G/22-2033-456R , install kit G/235-2033, and depending on the ratio you have now you might need a new carrier part # D/S32684 if the gear ratio is 392 or lower.

A: Hi James If yur Ford F-150 4x4 has 10 cover bolts on the rear axle cover plate it is the 8.8” axle and the G/22-2013-456 gears and a G/235-2013A http://jo.my/kzw70v master kit will fit your axle . The front axle will use the G/22-2088-456 http://jo.my/4atpvm gears with a G/235-2088 http://jo.my/7i4n0g master kit. If the rear axle has 12 cover bolts then you have a 9.75” rear and it will use the G/22-2012-456 http://jo.my/rlvado gears and a G/235-2012A http://jo.my/ny4ips master kit. Thank You

A: Hello Blue Mule, Yes, the G2 Axle and Gear Ford 8.8in. 4.56 Ratio G/22-2013-456 will fit the 1994 Ford Bronco 8.8 rear axle. However, with the factory carrier you may have an issue with the cross pin. We suggest you consider a lunchbox style locker for ease of installation. Thank you for the email.