Poison Spyder RockBrawler Rear Bumpers

From $769.99

• The Poison Spyder Rear Stinger Wrangler rear bumper is available in Bare Steel or Black Powder Coat
• 3/16 inch plate steel
• Maximize performance on the toughest trails
• High clearance, multi-faceted design Jeep rear bumper
• California Residents: WARNING

Poison Spyder Crusher Flares

From $599.99

• Poison Spyder Front Crusher Flare kit improves both the aesthetics and durability of your Jeep during your off road adventures
• Crusher Flares are constructed from 1.5 inch X .120 wall DOM tubing in combination with 1/8th and 3/16th high pressure plate steel
• The Crusher Flare kit utilizes stainless countersunk hardware to secure to the Jeeps outer skin and a combination of two heavy duty internal brackets that are coupled to the sub-frame
• Additionally the JK Front Crusher Flare Kit comes with a pair of rubber gaskets that isolates the fender from direct contact with the Jeep paint and body
• The Front Crusher Flare kit comes standard with mounting provisions to replace the factory side marker with an updated LED marker light
• Poison Spyder Front Crusher Flares retain the factory wheel well liner to protect the engine from trail and road debris
• California Residents: WARNING

Poison Spyder Inner Fender Kits

From $449.99

• Bare aluminum
• Front and rear
• Made of CNC laser cut aluminum sheet
• Bolt on applicaition
• California Residents: WARNING

Poison Spyder Crusher Corners

From $599.99

• Poison Spyder Crusher Corners are laser cut from high strength 3/16 inch plate steel then carefully roll-formed for a perfect fit to your Jeep's body lines
• Standard Crusher Corners come pre-configured with all of our most popular features including wheel opening, provisions for flush-mounted LED taillights (sold separately) and factory fuel filler opening
• All of the bolt holes are countersunk, and the supplied stainless steel flat head cap screws yield a smooth, flat surface to slide over rocks
• Available in Bare Steel or Black Powder Coat,Steel or aluminum, with and without flares and with and without holes for rear lights ther is a fit and style for everybody
• California Residents: WARNING

Poison Spyder Rocker Knockers

From $1,199.98

• Protect your Jeep rocker panels with Poison Spyder Rocker Knockers by cladding them in rugged, high strength 3/16" plate steel armor
• Manufactured to hug the lines of your Wrangler rocker panel perfectly forming a glove-fit with virtually no loss of ground clearance
• Specifically engineered for most Jeep CJ, YJ, TJ and LJ models
• Bolt holes are countersunk for the included stainless steel flat head hardware, which yields a flat, unobstructed surface to slide over obstacles.
• All mounting hardware is included as well as detailed installation instructions.
• California Residents: WARNING

Poison Spyder Hood Louvers

From $179.99

• Keep under-hood temperatures cooler by allowing hot air to escape through the vents
• The hood louvers allow for improved airflow into the engine bay helping your radiator and fan operate more efficently
• Crafted from quality, thick gauged aluminum sheet and CNC laser cut
• Light weight and corrosion resistant
• Easy installation (template included)
• Adds durability to the flimsy sheetmetal of most stock hoods
• Available in bare aluminum or black powder coat aluminum with corrosion resistant stainless steel fasteners included
• California Residents: WARNING

Poison Spyder BFH Disco Skid Plates

From $219.99

• JK skid plates 3/16" plate steel CNC laser-cut
• Swaybar disconnect armor
• 1 year warranty
• hardware included
• California Residents: WARNING

Poison Spyder Body Mounted Tire Carriers

From $999.99

• Poison Spyder Jeep Spare Tire Carrier
• Bare steel
• CNC laser cut
• Fit up to 40 inch tire and wheel combo on this Jeep tire carrier
• Mount for Hi-Lift jack
• Includes all mounting hardware
• California Residents: WARNING

Poison Spyder BFH Rear Bumpers

From $458.99

• The Poison Spyder Customs BFH™ Wrangler rear bumper is CNC laser-cut from high strength 3/16" plate steel, then precision brake-formed for an exact fit.
• Recovery Shackle Tabs are machined from 1" thick plate steel
• This Jeep rear bumper is intended for those hard-core wheelers who either wheel without a spare or strap the spare down into the bed of the Jeep.
• NOTE: Install requires cutting of stock frame rails!
• California Residents: WARNING

Poison Spyder Brawler Full Width Front Bumpers

From $683.99

• Full Width
• Plate Steel Construction
• Brawler Bar
• Easy Installation
• Recessed Fog Lamp Mounts
• Winch Compatibility
• Recovery Shaackle Tabs
• Optional Brawler Lite Skid
• California Residents: WARNING

Poison Spyder Body Armor Kits

From $295.99

• JK Body Armor is manufactured from either 3/16 inch high pressure steel plate or 3/16 inch 6061-T6 aluminum plate
• Available in Bare Steel or Black Powder Coat
• Spyder logo CNC cut into armor
• Bolt holes are countersunk in jeep rocker panel, and stainless steel flat head cap screws are supplied for a clean, flush-surface installation.
• Drilling of the body is required for installation on wrangler rocker panel.
• California Residents: WARNING

Poison Spyder Windshield Light Bar Mounts

From $249.99

• Available in black powder coat, bare steel and aluminum
• Attaches to a-pillar
• Made from 3/16 inch steel plate
• Includes rubber liners to avoid paint damage
• California Residents: WARNING

Poison Spyder Hood Logo Decals

From $59.99

• Available in black, silver, white or red
• California Residents: WARNING

Poison Spyder RockBrawler Bumpers

From $579.99

• This bumper is fabricated from 3/16 inch plate steel, CNC laser-cut and precision brake-formed into a low profile, high clearance design.
• The ends of the bumper extend far enough to protect the lower corner of the grille, but not far enough to hinder tire clearance or tire access to vertical obstacles.
• The two D-ring shackle mounts are CNC-machined from 1 inch plate steel to provide brute strength for the most demanding recovery operations.
• Accepts most major manufacturer's winches up to 15,000 lbs. capacity
• Recessed light mounts are provided for retention of the factory fog lamps or aftermarket off-road lamps
• California Residents: WARNING

Poison Spyder Windshield Decals

From $59.99

• Available in black, silver, white or red
• California Residents: WARNING

Poison Spyder LED Tail and Reverse Lights with Wiring Harnesses Kits

From $29.99

• Exclusive Plug-N-Play Design
• Supports 4 Inch Round LED Tailights
• Supports 2 1/2 Inch Round LED Back-Up lamps
• Supports LED License Plate and Third Brake Light
• California Residents: WARNING

Weather Guard Saddle Tool Boxes

From $1,007.99

• Tamper-resistant, retracting EXTREME PROTECTION Lock on the saddle tool box for trucks helps protect against break-ins
• 90 degree cover opening for easy access
• Automotive-style rotary latch on the saddle box features smooth one-touch opening
• Full weather seal on the truck tool box protects against the elements
• Convenient attachment points secures materials and tools in pickup bed
• ARMOR TUF finish ensures years of dependability
• Limited lifetime warranty ensures unparalleled quality

Weather Guard All-Purpose Truck Tool Chests

From $1,075.99

• The back of the truck chest tool box can be placed tight against the front of the pickup bed because zero clearance is needed for opening the cover
• The angled body design on the truck bed storage box is ideal for use with fifth wheel and goose neck trailer applications
• 90 degree cover opening for easy access
• Automotive-style rotary latch mechanism keeps the cover tight against the weather seal
• Full weather seal on the truck tool box protects against the elements
• 12 volt access for electrical up-fits

Weather Guard Gull Wing Tool Boxes

From $1,182.99

• Tamper-resistant, retracting EXTREME PROTECTION Lock on gull wing truck tool box helps protect against break-ins
• Twin, gull-wing type covers operate independently to provide easy access from either side of truck
• The truck tool box suspends from the side of a pickup truck allowing plenty of room underneath
• Automotive-style rotary latch features smooth one-touch opening from either side of the truck
• Full weather seal on the truck tool box protects against the elements
• 12 volt access for electrical up-fits
• Truck bed tool box includes powder coated steel divider tray and two keys

Weather Guard Wheel Well Truck Tool Boxes

From $766.99

• Pickup truck tool box can be used with some truck bed caps due to the low profile design
• Tamper-resistant, retracting EXTREME PROTECTION Lock on the wheel well truck box helps protect against break-ins Includes two keys
• 90 degree cover opening for easy access
• Full weather seal on the truck tool box protects against the elements

Weather Guard Lo-Side Truck Tool Boxes

From $742.00

• J-hook mounting requires no drilling of holes in the rails
• Tamper-resistant, retracting EXTREME PROTECTION Lock on the pickup truck tool box helps protect against break-ins
• Use separately or in combination with Cross or Saddle truck boxes
• 90 degree cover opening for easy access
• Automotive-style rotary latch features smooth one-touch opening from either side of the truck
• Full weather seal on the truck tool box protects against the elements
• 12 volt access for electrical up-fits
• Truck bed tool box includes mounting legs and hardware
• Two keys and a removable, high impact plastic tray included with truck box
• Limited lifetime warranty ensures unparalleled quality

Weather Guard Protect-A-Rail Cab Protectors

From $236.99

• Headache rack designed to protect the cab of the pickup from shifting loads in the cargo area
• Installation requires separate purchase of cab protector mounting kit custom fit for your vehicle
• Steel frame and 14-gauge louvers
• Limited lifetime warranty ensures unparalleled quality

Weather Guard Cab Protector Mounting Kits

From $100.00

Weather Guard Tool Box Accessories

From $140.99

• Part cabinet trays
• Divider trays
• Tool box lighting