Fabtech Basic Lift Systems

From $1,490.99

• Front Lift: Crossmember & Steering Knuckles
• Rear Lift: Lift Blocks with U-Bolts
• Includes: Lower control arm eccentric cams, sway bar drop brackets and more
• Shocks: Front & Rear Twin Tube Performance Shocks
• Multiple Lift Kits for Jeeps available
• California Residents: WARNING

Fabtech Radius Arm Systems

From $1,849.99

• Full Tubular Structure Strengthened by dimple die side plates
• Installation Hardware Included
• Includes Replacement Coil Springs
• Multiple Lift Kits for Jeeps available
• California Residents: WARNING

Fabtech 4 Link Lift Kits

From $2,729.97

• The 4 Link design provides the best ride, best handling, and the most articulation and suspension travel overall
• While there are other long arm, 3 link, radius arm systems on the market, these do not provide the reduced caster change and useable articulation on a JK, with the factory gas tank, that a Fabtech 4 Link long arm system can
• California Residents: WARNING

Method 305 NV Matte Black Wheels

From $269.00

• Available in sizes 16 through 20 inch diameter
• One-piece wheel
• Features a simulated beadlock ring
• Bolt pattern: 5, 6 and 8 Lug Design
• Finish: Matte Black
• California Residents: WARNING

Fabtech Performance Lift Kits

From $1,206.94

• Allows use of stock tires & wheels
• No driveshaft change required for AutoTrac models
• Crossmembers constructed of heavy 1/4” thick plate steel
• Solid steel billet sway bar end links
• Includes 1/4” thick steel differential skid plate
• Tubular impact struts included
• Retains factory steering centerlink & upper control arms in stock location
• California Residents: WARNING

Method 301 The Standard Matte Black Wheels

From $209.00

• Method 301 The Standard Wheels
• Wheel Size: 15, 16, 17, 18 and 20 inch Diameter
• Bolt pattern: 5, 6 and 8 Lug Design
• Finish: Matte Black
• California Residents: WARNING

Fabtech Budget Lift Kits

From $465.23

• 2 Retains factory front coil springs for a like stock ride
• Radius Arm drop brackets provide proper caster with the increased ride height
• Trac Bar is relocated to center axle under vehicle and work with the factory Pitman Arm
• Includes driveshaft carrier bearing spacer for smooth driveline operation
• Front bump stops are relocated to control suspension travel
• Performance Shocks provide a quality ride with extended durability compared to stock shocks
• Allows use of 35” tall tires with required fenderwell trimming
• California Residents: WARNING

Method 304 Double Standard Matte Black Wheels

From $229.00

• Method 304 Double Standard Wheels
• Wheel Size: 15, 16, 17 and 18 inch Diameter
• Bolt pattern: 5, 6 and 8 Lug Design
• Finish: Matte Black
• California Residents: WARNING

Fabtech Dirt Logic 2.25 Inch Shocks

From $2,072.84

• Dirt Logic 2.25
• Shock Absorber
• Stainless Steel
• Black
• California Residents: WARNING

Fabtech Performance Shocks

From $165.74

• Performance Gas Shock
• 9/16 inch Chrome Hardened Piston Rod
• 1 3/8 inch OD Piston
• Closed Cell Foam Insert
• High Flow 9 Stage Valving.
• California Residents: WARNING

Method 309 Grid Titanium Wheels

From $310.51

• Method 309 Grid Wheels
• Wheel Size: 16, 17, 18 inch diameter
• Bolt Pattern: 5, 6, 8 lug design
• Finish: Titanium
• California Residents: WARNING

Method 309 Grid Matte Black Wheels

From $310.51

• Method 309 Grid Wheels
• Wheel Size: 16, 17, 18 inch diameter
• Bolt Pattern: 5, 6, 8 lug design
• Finish: Matte Black
• California Residents: WARNING

Method 305 NV Machined Matte Black Wheels

From $269.00

• Method 305 NV Wheels
• Wheel Size: 16, 17, 18 and 20 inch Diameter
• Bolt pattern: 5, 6 and 8 Lug Design
• Finish: Matte Black and Machined Face
• California Residents: WARNING

Fabtech Stealth Monotube Shocks

From $100.43

• Stealth Monotube Shock Absorber
• Sold Individually
• California Residents: WARNING

Method 306 Mesh Matte Black Wheels

From $271.20

• Method 306 Mesh Matte Black Jeep Wheels
• Wheel Size: 16, 17, 18 and 20 inch Diameter
• Bolt pattern: 5, 6 and 8 Lug Design
• Finish: Matte Black
• California Residents: WARNING

Fabtech Coil Springs

From $183.31

• Sold as Pair
• California Residents: WARNING

Fabtech Spindle Systems

From $1,043.69

• Front and Rear Shocks Included
• Installation Hardware Included
• Total Bolt On Installation
• Multiple Lift Kits for Jeeps available
• California Residents: WARNING

Method Race Wheels UTV Series 401 Beadlock - Black

From $289.00

Fabtech Dirt Logic 4.0 Coilover Shocks

From $1,160.41

• 3.0" OD steel body with Cerakote finish 120 hour salt spray
• 2.75" OD billet aluminum piston
• 1-1/4" OD Nitrosteel black piston rod
• Viton seals
• Exotic valve stack
• 600lb. Eibach coil springs
• 2.5" OD aluminum reservoir with compression adjuster
• 5/8" upper spherical ball mounting ends
• 7/8" lower spherical ball mounting ends
• California Residents: WARNING

Fabtech Dirt Logic 3.0 Coilover Shocks

From $2,682.37

• 3.0" OD steel body with Cerakote finish 120 hour salt spray
• 2.75" OD billet aluminum piston
• 1-1/4" OD Nitrosteel black piston rod
• Viton seals
• Exotic valve stack
• 600lb. Eibach coil springs
• 2.5" OD aluminum reservoir with compression adjuster
• 5/8" upper spherical ball mounting ends
• 7/8" lower spherical ball mounting ends
• California Residents: WARNING

Fabtech Upper Control Arm Kits

From $1,160.79

• Control Arm Kit
• Control Arms Bushings
• California Residents: WARNING

Fabtech Coilover Conversion Systems

From $6,759.03

• 4.0 Coilover Conversion System
• Bolt-On Coilover Conversion System
• All Required Hardware
• Multiple Lift Kits for Jeeps available
• California Residents: WARNING

Method 308 Roost Matte Black Wheels

From $230.52

• Wheel Size: 17, 18, 20 inch diameter
• Bolt Pattern: 5, 6 lug design
• Finish: Matte Black
• California Residents: WARNING

Fabtech Uni-Ball Upper Control Arm Lift Kits

From $3,376.40

• Tubular arms eliminate factory upper ball joint w/ super strong 1" ID Stainless Steel American Uniball for increased suspension strength
• Additional caster is built into Arms for enhanced align ability with oversized tires
• 1.50" OD .120" wall 4130 Chromoly tubing reduces flex found in stock arms for more positive road feel
• 17-4 Heat treated Uniball pin fits into factory ball joint taper without modification to the spindle for easy return to stock feature
• 17-4 Stainless steel misalignments for proper clearance of large Uniballs throughout the travel range
• .250 wall DOM bushing barrels with welded gussets for strength
• Billet Aluminum versions also avaliable that feature: 6061 Billet Aluminum with thick cross sections for strength
• PTFE lined 1” Stainless Steel FK Uniballs for severe offroad use
• Heat Treated 17-4 Stainless Steel Uniball Pins fit into stock BJ taper
• Arms are adjustable to provide increase front end align ability
• Stunning black anodizing with flawless machine work
• California Residents: WARNING