Fabtech Performance Shocks

A: Give us a call, we need more information. Sales & Support - 877-474-4821

A: Front shock on 01 Dodge 1500 2WD with 2.5” lift should be 17.5” extended. The FTS7236 is 24.79” extended.

A: Yes they will fit.

A: You can go through the Fabtech shocks on our site to see which ones they look like or check out their website to do the same: https://www.4wheelparts.com/b/suspension/shock-absorbers/fabtech/_/N-cm7ltZ1z13ma9

A: Typically people mount them with the body down but it is up to you. Body down saves the shock shaft from getting damaged.

A: Rancho 9000XL would be best for your vehicle and has an adjusting valve.

A: Rear shock for 6" lift.

A: You didn't mention what size lift you have. This shock fits Tacoma's with 6" lift. If that is what you have, then this will work.

A: Hi Chucky, This Fabtech Performance Twin Tube Shock Absorber is a rear shock for current Toyota 4Runner, but it is also a front shock for Dodge Rams. There seems to be extra pictures for this listing and we will get it updated. FTS7237 is the shock absorber only.

A: Hi Jr, Yes, this Fabtech Performance Twin Tube Shock Absorber does have threaded top stem mount, mount code S1. It is a front shock for 7-7.5 inch lifts on various GM 1500s per Fabtech's catalog. While we do our best to get pictures of the part you are looking at, this particular picture we have is a representation as Fabtech probably did not provide pictures for every shock they sell. Hope this helps. If you have any further questions you can contact our customer service center @ 877-474-4821 and they can help you.

A: Hello T Valenz, This shock will not fit your vehicle with a 6" lift. We recommend part number S/DShockingES9000 to fit both front and rear of your vehicle. Thank you.

A: Hello lloyd, Sorry, this will not fit your vehicle application. We do offer the Part Number: S/DShockingES9000 that will fit your vehicle, front and rear. Thank you.

A: Hello Fish, Unfortunately Fabtech does not offer a shock for the stock height 2001 ford excursion. We do offer the Pro Comp ES9000 series shock package that will fit your vehicle application. That part number is S/DShockingES9000. Thank you for the question.

A: Thanks for the inquiry RedRipit, the Fabtech Performance Twin Tube Shock Absorber part # FABFTS7333 this is correct for the rear of the vehicle.

A: Hello Chris, Yes, this shock will fit the rear of your vehicle application. Thank you for the question.

A: Hello kyle, The Fabtech Performance Twin Tube Shock Absorber Part Number: FABFTS7236 will fit the rear of your vehicle application. Thank you.

A: Hello The boots are not included boot we have them in stock in a bunch of colors. They run 6.99 per pair of boots. Thanks

A: Hello Splitter, No, this shock will not fit your vehicle application. if you are looking for a nicer ride I suggest the Pro Comp Suspension MX-6 Monotube Adjustable Shock Absorber Part Number: EXPMX6028 (Front)

A: Seth, the correct part #s you need are fts7119 fronts and fts7333 for the rear. Thanks for your question.

A: Hello Shaun, Thank you for asking. The Fabtech Performance Twin Tube Shock Absorber part# FABFTS7267 are the correct rear shocks for a 04 Tacoma with the Fabtech 6" lift.

A: Hello Serg, Thank you for asking. Fabtech does not offer shocks for your vehicle. Here are some Pro Comps that are http://jo.my/udm8rj

A: Hello I found an older Fabtech catalog and it shows this to be the correct shock for your truck.

A: Hello Yes they do include the boots and the needed hardware for your Ram.

A: Hello Bill, and thank you for the inquiry on the Fabtech Performance Twin Tube Shock Absorber. Here are a few links for your correct shocks for your 6" lift kit: FRONT SHOCK:http://jo.my/lrtaz.qrcode REAR SHOCK: http://jo.my/5u44sl.qrcode

A: Thanks for the inquiry cog, the Fabtech Performance Twin Tube Shock Absorber part # FABFTS7159 the warranty covers the shock against manufacturers defects for the life you own them and you can only warranty them through the company that sold them to you.

A: hello there, the Fabtech Performance Twin Tube Shock Absorber will work on your truck as long as you have a Fabtech lift installed. If you don't then we recommend Pro comp ES3000 shocks. Same performance different company. Shop with us anytime, on your schedule. Browse 4WheelParts.com, call our customer service center, or come visit us in one of our stores. You can even save on shipping costs by shopping online and picking your order up in a store. No matter which method you prefer, we’re ready to help with excellent parts, advice, and service.

A: Thanks for the inquiry ted, the Fabtech Performance Shock Absorber part # FABFTS70001S is correct for the front strut and they are sold individually.

A: Thanks for the question Doug, Most of the pictures of shocks on our website are for example only, the picture may not be your exact shock. All FabTech shocks are application specific so as long as you put ALL you vehicle info we will get you the correct shock. I would recomend calling in your order to ensure we get you the correct fit.

A: Hello Mike, Thank you for asking. The FT2300s part number is no longer available. You will have to call in our sales department Toll-Free: 877-474-4821 with your vehicle information to see what Fabtech has available for you.

A: Thanks for the inquiry Bare Knuckle Bryan, the Fabtech Performance Twin Tube Shock Absorber part # FABFTS7333 is correct for your dual shock brackets.

A: Hello Hunter, the Fabtech Performance Twin Tube Shock Absorber part# FABFTS7266 will be fine with your 2" rear block kit. Thank you for your inquiry.

A: Hunter W. from Camden, SC, thank you for your inquiry on the Fabtech performance series shocks. Fabtech shocks are available for lifted applications. We will need to know if your truck has been modified to help you with the proper part numbers.

A: Thanks for your question Bearded, The Fabtech shocks part numbers are FTS7170 front and FTS6000 rear

A: Hello Tator, This Fabtech Performance Shock Absorber is correct for a 2004-2008 Ford F-150 2WD vehicle and it is a front strut for a 6" lift.

A: Hello othug and thank you for your question! Fabtech Performance Twin Tube Shock Absorber has an extended length of 32.95" and a collapsed length of 18.92". the website has a misprint on it. I hope my answer helps 4 Wheel Parts get your business!

A: Jeff, Yes, this will fit a 1998 Ford F150 4x4 with the Fabtech 6". The 2wd is a different part number.

A: Hello Tomas, the Fabtech Stabilizer will work great with your 17" rims and tires. Thank you for your inquiry.

A: Keisha, Thank you for asking. Fabtech Performance Twin Tube Shock Absorber will work on a 1999 F150 4x4 with a 6" lift.

A: Hello there, the Fabtech Performance Twin Tube Shock Absorber will work on your 2007 Ford F150 as long as you have a Fabtech lift installed. We would recommend a pro comp shock. Here are some of the features. The Pro Comp ES9000 is the ultimate nitrogen gas charged shock absorber. With its twin tube design and 10 stage velocity sensitive valving, the ES9000 delivers not only a smooth, comfortable highway ride, but it also enhances off road handling and performance. Engineered for those driving enthusiasts demanding optimum capacity for heavy loads as well as the most demanding driving conditions. It’s a 1-3/8" nylon banded full displacement piston head and double welded shock mounts ensure maximum strength and long lasting durability. Sold individually. Shock boots sold separately.

A: Hello Jon, the Fabtech Performance Twin Tube Shock Absorbers will work on the rear of your truck but your front requires struts. Fabtech does not make any Struts at this time. A good option would be the Bilstein shocks and struts. thank you for your inquiry.

A: Big D- Thanks for the question. The Fabtech Performance Shock Absorber does not lift your truck. It only replaces the stock shock. I would recommend tightening up your torsion keys.

A: Jake- Thanks for the question. The part number to replace your fabtech shocks is FABFTS70001S

A: Hello Angel, Thank you for the question. Yes, this will fit your vehicle application in the rear.

A: Hello Laurence, Thank you for the question. Yes, this shock will fit.

A: Riot- Thanks for the question. The Fabtech Performance Twin Tube Shock Absorber will fit at stock height only.

A: Hello samsquanch, Thank you for the question. This is the correct part number for the front of your vehicle application.

A: Bam- Thanks for the question. The Fabtech Performance Twin Tube Shock Absorber are sold individually.

A: Hello Jesse R, Thank you for the question. The correct Part Number: FABFTS7267

A: Titan- Thank you for your question. The Fabtech Performance Twin Tube Shock Absorber is not a dirt logic 2.5. A replacement Dirt Logic shock can be found here http://jo.my/dmgbb8 .

A: Dannyboy- Thank you for your question. The Fabtech Performance Twin Tube Shock Absorber dose not lift your vehicle. This shock is good shock for off road. You should replace them in pairs for either 2 or 4wd. They are sold individually.

A: Trever- Thank you for your question. The Fabtech Performance Twin Tube Shock Absorber are sold individually. You should replace all 4 at a time but you can do front or rear separately. Most often it is the fronts that go out first unless you do allot of towing or hauling.

A: Boy- Thank you for your question. We do not show an option for 2" drop in the front. We do have an option for 3" drop in the rear found here http://jo.my/r06dqv

A: Jim- Thank you for your question. The Fabtech Performance Twin Tube Shock Absorber will fit the rear of your 01 Chevy Silverado 2500hd Diesel. For the front i would recommend the Bilstien 1500 found here http://jo.my/j2xpm4

A: joey- Thank you for your question. The Fabtech Performance Twin Tube Shock Absorber part number FABFTS7172 is not the right fab tech shock for your lifted jeep. The Shock that will fit a 2000 Jeep with a 3" lift can be found here http://jo.my/6vkd5i

A: Jeremy- Thank you for your question. The Fabtech Performance Twin Tube Shock Absorber do not come with shock boots. If you would like shock boots, we have a wide selection of colors available here http://jo.my/ddh5mn

A: Jeremy- Thank you for your question. The Fabtech Performance Twin Tube Shock Absorber part number FABFTS7333 will fit your 08 2wd Ranger. The 3" body lift should not effect the shock mounting points. Another excellent choice for your application is the pro comp MX-6 http://jo.my/trvgnr . This will allow you to adjust your ride to deal with changing on and off road needs.

A: Don- Thank you for your question. The Fabtech Performance Twin Tube Shock Absorber will fit your 2011 ford f250 4x4. I would recommend that you look at our shocking deals if you are looking to replace all your shocks. http://jo.my/o1jyz8

A: Tater- Thank you for your question. The Fabtech Performance Twin Tube Shock Absorber will fit the rear of your lift kit with part number FABFTS7333 and FABFTS7191 for the front.

A: Redbowles- Thank you for your question. The Fabtech Performance Twin Tube Shock Absorber part number FABFTS7231 is the correct shock to replace your rear shocks.

A: Dmoor- Thank you for your question. The Fabtech Performance Twin Tube Shock Absorber will fit your 07 Nissan Titan with a 2 inch lift. I would recomment the pro comp pro runner shocks found here http://jo.my/28edvf

A: Hello Kalani, Thank you for the question. The Fabtech Performance Twin Tube Shock Absorber FABFTS7267 are sold each.

A: Hi Thumper Fabtech offers different styles for your truck. if you would like to replace the existing shocks with the same you can take the numbers off the shocks and we can rep[lace the with the same. Thank You

A: Hello putney, Thank you for the question. The Fabtech Performance Shock Absorber FABFTS7078 are sold each.

A: Hello Larry, Thank you for the question. The coilovers are your shocks for the front of the vehicle. The Fabtech Performance Twin Tube Shock Absorber FABFTS7266 will fit the rear of your vehicle application.

A: Hello Parts Girl, Thank you for the question. The Fabtech Performance Twin Tube Shock Absorber FABFTS7266 are sold individually.

A: Hello Burke, Thank you for the question. Yes, the Fabtech Performance Twin Tube Shock Absorber FABFTS7240 is the correct part number for the rear of your vehicle.

A: Hello kenneth mac, Yes, the Fabtech Performance Twin Tube Shock Absorber FABFTS7331 is the same as your FTS7331. Thank you for the email.

A: Beachowl- thanks for asking. Fabtech Performance Twin Tube Shock absorbers are sold individually

A: Hello auzerae, The Fabtech Performance Twin Tube Shock Absorber FABFTS7159 will fit the front application of you vehicle. Thank you for the email.

A: Hello CRoth51, Fabtech Performance Shocks have been designed to work in conjunction with each Fabtech suspension systems, resulting in superior ride control. Features include high velocity 9-stage valving for excellent dampening capabilities and a closed cell insert to reduce shock fade at high speeds. Thank you for the email.

A: Hi Grubah Buy now with confidence. A service rep will contact you to confirm fitment before your order ships. If you modified your vehicle, we'll ensure you receive the correct shock application http://jo.my/prorunnerss Thank You

A: Thank you for your question. The Fabtech Performance Twin Tube Shock Absorber part number FABFTS7189 will fit your 2006 F-350 6.0 diesel crew cab 4x4

A: Hello Mike, The Fabtech Performance Twin Tube Shock Absorber FABFTS7333 is sold as a single shock. Both front shocks part numbers for this application is FABFTS7078 and FABFTS7330. The FABFTS7333 shock is for the rear with 4" lift. Thank you for the email.

A: Hello Olmito, The correct part numbers are (Front) FABFTS7231 http://jo.my/2quvkt and (Rear) FABFTS7236 http://jo.my/szs45e Thank you for the email.

A: Hello codyT, Here are the correct part numbers (Front) FABFTS70001S http://jo.my/bjcji0 and (Rear) FABFTS70001S http://jo.my/bjcji0 You will retain the front coil springs. Thank you for the email.

A: Cory- Thanks for the inquiry. This part number will not fit your 2005 Chevy Silverado 2500HD with a 6 inch lift. You can find the correct front part number here http://jo.my/42u1de and the correct rear shock here http://jo.my/7630ze

A: Hello Mark, Yes, the Fabtech Performance Twin Tube Shock Absorber FABFTS7238 are the correct shock for the front of the vehicle. The rear is FABFTS7236 http://jo.my/uhpa3n Thank you for the email.

A: Hello Bryan, The Fabtech Performance Twin Tube Shock By Fabtech FABFTS7159 is able to mount in the front of the rear application. Without knowing the exact year, make and model of your vehicle it's hard for us to get you a definitive yes or no answer. If you go to our shock absorber page you will see attributes on the left side of the page. At the bottom of that column you will see "Position w/Lift". Please click on the specific designation that fits your vehicle. This will them so all shocks that will fit your vehicle and the location. A "Twin-Tube" shock has an internal smaller body that the shock piston and rod travel inside. A "Mono-Tube" shocks piston will utilizes the entire diameter of the shock body. Thank you for the email.

A: Nelson, Yes, the Fabtech Performance Twin Tube Shock By Fabtech FABFTS7333 will fit your application.

A: NJwildfowler, The Fabtech Performance Twin Tube Shock By Fabtech FABFTS7240 do not come with shock boots. Here is a direct link to the black shock boots http://jo.my/blackshockboot

A: The Fabtech Performance Twin Tube Shock By Fabtech are sold individually

A: The Fabtech Performance Twin Tube Shock are sold individually

A: Kyle, What manufacturer makes the 6 Inch lift kit? This will help us get you the correct shock for your truck. Some manufacturers use different shock mounting locations. Fabtech Performance Twin Tube Shock By Fabtech FABFTS7333