Welcome Guest
SHOP BY CATEGORY
SHOP BY BRAND
SHOP BY VEHICLE
Sales Support 877-474-4821
877-260-5452
Call Our Stateside Experts!
AMP-Research/Synergy Manufacturing AMP-Research
AMP-Research/Synergy Manufacturing On Sale
54 Product Groups
Switch to View Products
AMP Research PowerSteps
AMP Research PowerStepFrom $1,799.99
- 5-year/60,000-mile warranty
- 600 pound load capacity per side
- Designed and Made in the USA
- High-strength die-cast, aluminum-alloy linkage components
- Zero-maintenance stainless-steel pivot pins with self-lubricating bushings
- California Residents: WARNING
From $1,799.99
4.7
4.7
(211)
AMP Research PowerStep Xtreme Running Boards
AMP Research PowerStep™ XTremeFrom $2,199.99
- Electric Power
- Full Strength Die Cast Aluminum
- Corrosion Resistant Finish
- Delivers Substantial Power When Deploying and Withdrawing
- All Weather Functioning
- Hard Working Construction For Superb Traction
- Twin Motors Drive Running Board
- OEM Quality Construction
- LED Illumination When Boards Are Deployed
- 5-Year/60,000 Mile Warranty
- California Residents: WARNING
From $2,199.99
4.1
4.1
(15)
AMP Research BedSteps
AMP-Research BedStepFrom $329.99
- AMP Research BedStep bumper step
- Fits: Chevy, Ford, Dodge, Jeep and Toyota
- High-strength die-cast, aluminum-alloy linkage components
- 2 and 4-door models
- Military-spec, anodized and Teflon finish to resist corrosion
- Mounts under rear bumper
- 3 year/36,000 mile warranty
- California Residents: WARNING
From $329.99
4.3
4.3
(39)
AMP Research PowerStep XL Running Boards
AMP-Research PowerStep XLFrom $2,299.99
- Automatic power deploying Running Boards
- Low-Profile Integrated LED Light System
- Rail constructed of 3MM thick walled Mild Steel for MAXIMUM STRENGTH
- Finish: Black
- California Residents: WARNING
From $2,299.99
4.7
4.7
(27)
AMP Research BedStep2
AMP Research BedStep2From $329.99
- Side-mounted bed access step
- Engineered to support loads up to 300 lbs.
- High-strength aluminum alloy components
- Precision stainless-steel pivot pins for rock-solid stability
- Maintenance-free, self lubricating bushings for all-weather performance
- Military-spec, corrosion-resistant, anodized and PTFE coated finish
- Non-slip, glass-reinforced composite step pad–big enough for two large boots
- Easy bolt-on installation
- 3-year/36,000-mile warranty
- Designed and built in America
- California Residents: WARNING
From $329.99
4.1
4.1
(8)
AMP Research PowerStep Plug And Play Kits
AMP-Research PowerStep Plug And PlayFrom $1,799.99
- 5-year/60,000-mile warranty
- 600 pound load capacity per side
- Designed and Made in the USA
- High-strength die-cast, aluminum-alloy linkage components
- Textured powder coat finish for maximum grip and durability
- Zero-maintenance stainless-steel pivot pins with self-lubricating bushings
- California Residents: WARNING
From $1,799.99
4.4
4.4
(69)
From $450.00
4.0
4.0
(8)
Synergy Manufacturing Wheel Spacers
Synergy Manufacturing Wheel SpacersFrom $110.00
- Wheel hub centric for increased strength (-H part numbers only)
- CNC machined from billet 6061-T6 aluminum
- Features corrosion resistant red anodizing
- Can be used with factory or after market wheels
- Adapters are 1.50" wide
- Includes Loctite
- Sold as a pair
From $110.00
4.2
4.2
(12)
From $250.00
3.5
3.5
(10)
AMP Research PowerStep Plug-n-Play Pass-Through Harnesses
AMP-Research PowerStep; Plug And Play Pass Through HarnessFrom $119.99
- PowerStep
- Plug and Play Pass Through Harness
- Black
- California Residents: WARNING
From $119.99
3.7
3.7
(3)
From $350.00
4.1
4.1
(16)
AMP Research PowerStep Controller Switches
AMP Research PowerStep Controller SwitchFrom $112.12
- The toggle switch can be easily installed on the dash and is wired directly to the PowerStep Controller
- Override Retract (Up) keeps the steps up and out of the way, regardless of what you do with the doors
- Automatic Mode (Middle) steps are activated by the doors, deploying when the doors are opened, retracting when they're closed
- Override Deploy (Down) keeps the steps down and ready for use, regardless of what you do with the doors
- California Residents: WARNING
From $112.12
4.4
4.4
(8)
Synergy Manufacturing Axle Housing Inner Sleeve Kit
Synergy Manufacturing Axle Housing Inner Sleeve KitFrom $150.00
- Designed to increase the strength of the front Axle housing which is prone to bending when larger off road tires are installed and used off road
- Inner Axle Sleeves add a 57% increase in strength over stock
- The stock axle housing must be drilled and plug welded for installation
- California Residents: WARNING
From $150.00
Synergy Manufacturing Skid Plates
Synergy ManufacturingFrom $1,335.00
- Jeep skid plates manufactured from 3/16" crush resistant Grade A-572 Steel plate
- Flush mounted hardware provides a 100% smooth skid surface
- Premium powdercoat finish for maximum corrosion resistance
- Allows access to drain plug without removal
- Made in the USA
- California Residents: WARNING
From $1,335.00
5.0
5.0
(8)
Synergy Manufacturing Jeep Tie Rod Clamps
Synergy Manufacturing Jeep JK 1 3/8 inch Tie Rod ClampFrom $75.00
- CNC machined from 1020 DOM material
- 100% bolt on
- Zinc plated for corrosion resistance
- Made in the U.S.A
- California Residents: WARNING
From $75.00
3.8
3.8
(4)
Synergy Manufacturing Front Track Bar & Sector Shaft Brace Kit
Synergy Manufacturing Front Track Bar & Sector Shaft Brace KitFrom $275.00
- Front Track Bar & Sector Shaft Brace Kit
- 2 and 4-door models
- Includes SYN8069-01 & SYN8069-02
- Steering Sector Brace
- Track bar brace
- Laser cut and CNC bent from 3/16" high strength steel
- Gray powder coat finish for maximum corrosion resistance
- Bolt on installation
- Made in the USA
- California Residents: WARNING
From $275.00
Synergy Manufacturing Suspension Systems
Synergy Manufacturing .75 Inch Coil Spring Spacer KitFrom $1,190.00
- Synergy Manufacturing products & systems have been designed by real engineers with 10+ years of suspension design & experience in the off road industry.
- All Synergy products are designed with the use of the latest CAD engineering software to ensure the highest level of fit, finish, and performance.
- California Residents: WARNING
From $1,190.00
4.7
4.7
(42)
Synergy Manufacturing Front Track Bar Relocation Bracket
Synergy Manufacturing Front Track Bar Relocation BracketFrom $220.00
- This bracket raises the vehicle's axle side track bar mount
- Heavy-duty
- Special bolt-on design strengthens the factory mount that is prone to failure
- Laser cut from 3/16" steel & 2 stage powdercoat finish for maximum strength and durability
- Suspension components feature an abrasive resistant powder coat finish for maximum durability and corrosion resistance
- California Residents: WARNING
From $220.00
4.8
4.8
(4)
Synergy Grab Handles
Synergy Grab HandlesFrom $100.00
- Powder coat finish eliminates corrosion that can occur under extreme element. Includes all hardware necessary for a quick and easy installation. Compatible with both hard and soft tops3
- California Residents: WARNING
From $100.00
4.0
4.0
(4)
Synergy Manufacturing Rear Track Bars
Synergy Manufacturing Rear Track BarFrom $225.00
- Bent to clear most aftermarket differential covers
- Retains factory track bar mounting bolts and hardware
- Made from high quality 1-1/4 inch 1018 CR Solid Round Barstock
- Allows centering of rear axle when running a suspension lift
- 100% bolt on
- Rear track bar relocation bracket for lifts taller than 4.5 inch
- Made in the U.S.A
- California Residents: WARNING
From $225.00
5.0
5.0
(2)
Synergy Manufacturing Shock Mounts
Synergy Manufacturing Shock MountsFrom $100.00
- Synergy Manufacturing products & systems have been designed by real engineers with 10+ years of suspension design & experience in the off road industry. All Synergy products are designed with the use of the latest CAD engineering software to ensure the highest level of fit, finish, and performance.
- California Residents: WARNING
From $100.00
4.2
4.2
(6)
Synergy Manufacturing Adjustable Front Lower Control Arms
Synergy Manufacturing Adjustable Front Lower Control ArmsFrom $500.00
From $500.00
5.0
5.0
(2)
AMP Research BedXtender Bracket Kits
AMP-Research BedXtender HD; GMT 900 Bracket KitFrom $19.99
- BedXtender HD
- Constructed of lightweight aluminum
- Silver or black powder-coat finish
- Nylon uprights for maximum strength
- U-shape design for increased capacity
- Easy to mount and remove
- 3 year warranty
- Made in the USA
- California Residents: WARNING
From $19.99
4.9
4.9
(9)
Synergy Manufacturing Air Compressor Brackets
Synergy Manufacturing Air Compressor BracketFrom $60.00
- Synergy Manufacturing Air Compressor Brackets easily bolt on mount to supply a spot to mount an onboard air compressor under the hood of your JK
- Works with VIAIR 100, 400, & 450 series compressors
- California Residents: WARNING
From $60.00
4.7
4.7
(3)
204 Products
Switch to View Product Groups
4WP PROTECTION PLAN
Our Protection Plan covers your investment above and beyond the manufacturer's coverage. For only 10% more, if your item is damaged, fails or malfunctions, we'll replace it for free!
Sign In Or Create an Account
Reset Password
An email is sent to .
Enter email address to change your password
After you submit your email address, you'll receive an email a link that will let you change your password.
Choose Your Secure Checkout Method
Create An Account
Add to Wishlist
AMP Research PowerStep Plug & Play Running Boards - 76255-01A
How to Get it
Free! Curbside & In-Store Pickup: Select A Store Near You
Ship to Home:
In-Stock Ships next business day ?- Fitment: Direct Fit
- Includes OEM style illumination
- Automatic power-deploying running boards
- Low-profile integrated LED light system-standard
- High strength, die cast aluminum alloy components
- Anodized and PTFE-coated military- spec finish
- Corrosion resistant
- Precision stainless steel pivot pins for rock-solid stability
- Installs with Plug-and-Play technology
- Maintenanc free, self lubricating bushings for all weather performance
- 5-year/60,000 mile warranty
- Designed and made in the USA
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed!
Qualifies for Free Shipping
$1,799.99
$1,862.70
In-Stock Ships next business day ?
$1,799.99
$1,862.70
In-Stock Ships next business day
?
LOW PRICE GUARANTEE
EASY RETURNS
How to Get it
Free! Curbside & In-Store Pickup: Select A Store Near You
Ship to Home:
In-Stock Ships next business day ?- Fitment: Direct Fit
- Includes OEM style illumination
- Automatic power-deploying running boards
- Low-profile integrated LED light system-standard
- High strength, die cast aluminum alloy components
- Anodized and PTFE-coated military- spec finish
- Corrosion resistant
- Precision stainless steel pivot pins for rock-solid stability
- Installs with Plug-and-Play technology
- Maintenanc free, self lubricating bushings for all weather performance
- 5-year/60,000 mile warranty
- Designed and made in the USA
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed!
Qualifies for Free Shipping
4WP PROTECTION PLAN
Our Protection Plan covers your investment above and beyond the manufacturer's coverage. For only 10% more, if your item is damaged, fails or malfunctions, we'll replace it for free!
Sign In Or Create an Account
Reset Password
An email is sent to .
Enter email address to change your password
After you submit your email address, you'll receive an email a link that will let you change your password.
Choose Your Secure Checkout Method
Create An Account
Add to Wishlist
Synergy Manufacturing Heavy-Duty Drag Link - 8701-01
How to Get it
Free! Curbside & In-Store Pickup: Select A Store Near You
Ship to Home:
In-Stock Ships next business day ?- Fitment: Direct Fit
- Ram 2500
- 13-Current Ram 3500
- Min collapsed length: 39.13 inches
- Max extended length: 41.50 inches
- CNC formed from 1.75 inch x .188 wall seamless chromoly tubing and heat treated after forming
- Improves strength and steering feel and eliminates any chance of bending
- Offers a more direct connection to the road compared to stock
- no more bent drag links and constantly having to align your vehicle
- Synergy Heavy Duty Metal on Metal Tie Rod Ends are stronger and more durable than stock
- Includes grease fittings/replaceable dust boots for ease of maintenance
- Synergy High Performance Grease recommended (4119)
- Eliminates unwanted drag link flop
- Drag Link length adjustable on the vehicle
- Compatible with stock wheels and tires
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed!
Qualifies for Free Shipping
$500.00
In-Stock Ships next business day ?
$500.00
In-Stock Ships next business day
?
LOW PRICE GUARANTEE
EASY RETURNS
How to Get it
Free! Curbside & In-Store Pickup: Select A Store Near You
Ship to Home:
In-Stock Ships next business day ?- Fitment: Direct Fit
- Ram 2500
- 13-Current Ram 3500
- Min collapsed length: 39.13 inches
- Max extended length: 41.50 inches
- CNC formed from 1.75 inch x .188 wall seamless chromoly tubing and heat treated after forming
- Improves strength and steering feel and eliminates any chance of bending
- Offers a more direct connection to the road compared to stock
- no more bent drag links and constantly having to align your vehicle
- Synergy Heavy Duty Metal on Metal Tie Rod Ends are stronger and more durable than stock
- Includes grease fittings/replaceable dust boots for ease of maintenance
- Synergy High Performance Grease recommended (4119)
- Eliminates unwanted drag link flop
- Drag Link length adjustable on the vehicle
- Compatible with stock wheels and tires
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed!
Qualifies for Free Shipping
4WP PROTECTION PLAN
Our Protection Plan covers your investment above and beyond the manufacturer's coverage. For only 10% more, if your item is damaged, fails or malfunctions, we'll replace it for free!
Sign In Or Create an Account
Reset Password
An email is sent to .
Enter email address to change your password
After you submit your email address, you'll receive an email a link that will let you change your password.
Choose Your Secure Checkout Method
Create An Account
Add to Wishlist
AMP Research BedStep2 Retractable Truck Bed Side Step - 75403-01A
How to Get it
Free! Curbside & In-Store Pickup: Select A Store Near You
Ship to Home:
In-Stock Ships next business day ?- Fitment: Direct Fit
- Ford F-250/F-350
- Fits all beds
- AMP Research BedStep2 box-side step
- Mounts to either side of the truck box
- High-strength die-cast, aluminum-alloy linkage components
- Military-spec, anodized and Teflon finish to resist corrosion
- Precision, stainless-steel pivot pins for rock-solid stability
- Non-slip, glass-reinforced composite step pad, big enough for two large boots
- 300 Lb. load capacity
- Easy bolt-on installation
- 3-year/36,000-mile warranty
- Designed and Made in the USA
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed!
Qualifies for Free Shipping
$329.99
In-Stock Ships next business day ?
$329.99
In-Stock Ships next business day
?
LOW PRICE GUARANTEE
EASY RETURNS
How to Get it
Free! Curbside & In-Store Pickup: Select A Store Near You
Ship to Home:
In-Stock Ships next business day ?- Fitment: Direct Fit
- Ford F-250/F-350
- Fits all beds
- AMP Research BedStep2 box-side step
- Mounts to either side of the truck box
- High-strength die-cast, aluminum-alloy linkage components
- Military-spec, anodized and Teflon finish to resist corrosion
- Precision, stainless-steel pivot pins for rock-solid stability
- Non-slip, glass-reinforced composite step pad, big enough for two large boots
- 300 Lb. load capacity
- Easy bolt-on installation
- 3-year/36,000-mile warranty
- Designed and Made in the USA
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed!
Qualifies for Free Shipping
4WP PROTECTION PLAN
Our Protection Plan covers your investment above and beyond the manufacturer's coverage. For only 10% more, if your item is damaged, fails or malfunctions, we'll replace it for free!
Sign In Or Create an Account
Reset Password
An email is sent to .
Enter email address to change your password
After you submit your email address, you'll receive an email a link that will let you change your password.
Choose Your Secure Checkout Method
Create An Account
Add to Wishlist
Synergy Hub Centric Wheel Spacers - 8810-02
How to Get it
Free! Curbside & In-Store Pickup: Select A Store Near You
Ship to Home:
In-Stock Ships next business day ?- Fitment: Direct Fit
- Synergy wheel spacers
- Width: 1 3/4"
- Wheel Stud Size: M14 x 1.50
- Wheel hub centric for increased strength
- CNC machined from billet 6061-T6 aluminum
- Features corrosion resistant red anodizing
- High grade wheel studs and lug nuts
- Can be used with factory or after market wheels
- Includes Loctite
- Sold as a pair
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed!
Qualifies for Free Shipping
$110.00
In-Stock Ships next business day ?
$110.00
In-Stock Ships next business day
?
LOW PRICE GUARANTEE
EASY RETURNS
How to Get it
Free! Curbside & In-Store Pickup: Select A Store Near You
Ship to Home:
In-Stock Ships next business day ?- Fitment: Direct Fit
- Synergy wheel spacers
- Width: 1 3/4"
- Wheel Stud Size: M14 x 1.50
- Wheel hub centric for increased strength
- CNC machined from billet 6061-T6 aluminum
- Features corrosion resistant red anodizing
- High grade wheel studs and lug nuts
- Can be used with factory or after market wheels
- Includes Loctite
- Sold as a pair
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed!
Qualifies for Free Shipping
4WP PROTECTION PLAN
Our Protection Plan covers your investment above and beyond the manufacturer's coverage. For only 10% more, if your item is damaged, fails or malfunctions, we'll replace it for free!
Sign In Or Create an Account
Reset Password
An email is sent to .
Enter email address to change your password
After you submit your email address, you'll receive an email a link that will let you change your password.
Choose Your Secure Checkout Method
Create An Account
Add to Wishlist
Synergy Manufacturing Ram Adjustable Track Bar - 8550-11
How to Get it
Free! Curbside & In-Store Pickup: Select A Store Near You
Ship to Home:
In-Stock Ships next business day ?- Fitment: Direct Fit
- 03-13 Dodge Ram 2500 4x4, 03-12 Dodge Ram 3500 4x4, 06-08 Dodge Ram 1500 Megacab 4x4
- Front track bar
- Bent to clear most aftermarket differential covers
- Retains factory track bar mounting bolts & hardware
- Made from high quality 1.5" x .250" wall DOM tubing
- Allows centering of front axle when running a suspension lift
- Suspension components feature an abrasion-resistant powder coat finish for maximum durability and corrosion resistance
- Synergy double adjuster sleeve & pinch bolt assembly allows for adjustment of track bar length without removing control arm mounting bolt
- Features Synergy Dual Durometer Bushings (DDB) with Teflon bearing surface for a maintenance free design focusing on performance, flex, longevity, and ride quality
- 100% bolt on components assures an easy, trouble free installation with the use of basic hand tools
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed!
Qualifies for Free Shipping
$400.00
In-Stock Ships next business day ?
$400.00
In-Stock Ships next business day
?
LOW PRICE GUARANTEE
EASY RETURNS
How to Get it
Free! Curbside & In-Store Pickup: Select A Store Near You
Ship to Home:
In-Stock Ships next business day ?- Fitment: Direct Fit
- 03-13 Dodge Ram 2500 4x4, 03-12 Dodge Ram 3500 4x4, 06-08 Dodge Ram 1500 Megacab 4x4
- Front track bar
- Bent to clear most aftermarket differential covers
- Retains factory track bar mounting bolts & hardware
- Made from high quality 1.5" x .250" wall DOM tubing
- Allows centering of front axle when running a suspension lift
- Suspension components feature an abrasion-resistant powder coat finish for maximum durability and corrosion resistance
- Synergy double adjuster sleeve & pinch bolt assembly allows for adjustment of track bar length without removing control arm mounting bolt
- Features Synergy Dual Durometer Bushings (DDB) with Teflon bearing surface for a maintenance free design focusing on performance, flex, longevity, and ride quality
- 100% bolt on components assures an easy, trouble free installation with the use of basic hand tools
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed!
Qualifies for Free Shipping
4WP PROTECTION PLAN
Our Protection Plan covers your investment above and beyond the manufacturer's coverage. For only 10% more, if your item is damaged, fails or malfunctions, we'll replace it for free!
Sign In Or Create an Account
Reset Password
An email is sent to .
Enter email address to change your password
After you submit your email address, you'll receive an email a link that will let you change your password.
Choose Your Secure Checkout Method
Create An Account
Add to Wishlist
AMP Research BedStep2 Retractable Truck Bed Side Step - 75413-01A
How to Get it
Free! Curbside & In-Store Pickup: Select A Store Near You
Ship to Home:
In-Stock Ships next business day ?- Fitment: Direct Fit
- Ford F-250/F-350 Super Duty
- Black
- Mounting hardware included
- California Residents: WARNING
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed!
Qualifies for Free Shipping
$329.99
In-Stock Ships next business day ?
$329.99
In-Stock Ships next business day
?
LOW PRICE GUARANTEE
EASY RETURNS
How to Get it
Free! Curbside & In-Store Pickup: Select A Store Near You
Ship to Home:
In-Stock Ships next business day ?- Fitment: Direct Fit
- Ford F-250/F-350 Super Duty
- Black
- Mounting hardware included
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed!
Qualifies for Free Shipping
4WP PROTECTION PLAN
Our Protection Plan covers your investment above and beyond the manufacturer's coverage. For only 10% more, if your item is damaged, fails or malfunctions, we'll replace it for free!
Sign In Or Create an Account
Reset Password
An email is sent to .
Enter email address to change your password
After you submit your email address, you'll receive an email a link that will let you change your password.
Choose Your Secure Checkout Method
Create An Account
Add to Wishlist
Synergy Manufacturing Heavy-Duty Tie Rod - 8702-01
- Fitment: Direct Fit
- Ram 2500
- 13-Current Ram 3500
- Over 40% stronger than the stock tie rod
- Bolts right into the factory mounts with no additional wheel requirements
- Improves strength and steering feel and eliminates any chance of bending
- Offers a more direct connection to the road compared to stock
- No more bent tie rods and constantly having to align your vehicle
- Synergy Heavy Duty Metal on Metal Tie Rod Ends are stronger and more durable than stock
- Includes grease fittings/replaceable dust boots for ease of maintenance
- Synergy High Performance Grease recommended (4119)
- Eliminates unwanted tie rod flop and the steering deadspot commonly encountered with hydro assist setups
- Tie rod length adjustable on the vehicle
- Compatible with stock wheels and tires
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed!
Qualifies for Free Shipping
$600.00
On Backorder
Contact Us for Availability or Alternatives
LOW PRICE GUARANTEE
EASY RETURNS
Email me when this product comes in stock
LOW PRICE GUARANTEE
EASY RETURNS
$600.00
On Backorder
Contact Us for Availability or Alternatives
Email me when this product comes in stock
LOW PRICE GUARANTEE
EASY RETURNS
- Fitment: Direct Fit
- Ram 2500
- 13-Current Ram 3500
- Over 40% stronger than the stock tie rod
- Bolts right into the factory mounts with no additional wheel requirements
- Improves strength and steering feel and eliminates any chance of bending
- Offers a more direct connection to the road compared to stock
- No more bent tie rods and constantly having to align your vehicle
- Synergy Heavy Duty Metal on Metal Tie Rod Ends are stronger and more durable than stock
- Includes grease fittings/replaceable dust boots for ease of maintenance
- Synergy High Performance Grease recommended (4119)
- Eliminates unwanted tie rod flop and the steering deadspot commonly encountered with hydro assist setups
- Tie rod length adjustable on the vehicle
- Compatible with stock wheels and tires
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed!
Qualifies for Free Shipping
4WP PROTECTION PLAN
Our Protection Plan covers your investment above and beyond the manufacturer's coverage. For only 10% more, if your item is damaged, fails or malfunctions, we'll replace it for free!
Sign In Or Create an Account
Reset Password
An email is sent to .
Enter email address to change your password
After you submit your email address, you'll receive an email a link that will let you change your password.
Choose Your Secure Checkout Method
Create An Account
Add to Wishlist
Synergy HD Steering Tie Rod - 8802-01
- Fitment: Direct Fit
- Fully adjustable to fit all JL Wrangler models with different axle widths
- Heat treated chromoly construction improves tie rod stiffness, strength, and steering feel
- Eliminates any chance of bending this tie rod
- Offers a more direct connection to the road/trail compared to stock
- New Synergy Heavy Duty Metal on Metal Tie Rod Ends are stronger and more durable than stock
- Includes grease fittings/replaceable dust boots for ease of maintenance
- Single plane tie rod end used to eliminate unwanted tie rod flop and prevent the steering deadspot encountered with hydro assist setups
- Simplifies installation and only allows necessary degree of movement of the bar
- Double Adjuster assembly allows adjustment of tie rod length without removing it from the vehicle
- Tie Rod has an outer diameter (OD) of 1.50 inches
- Must use Synergy High Mount Steering Stabilizer kit, 8807-03
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed!
Qualifies for Free Shipping
$500.00
On Backorder
Contact Us for Availability or Alternatives
LOW PRICE GUARANTEE
EASY RETURNS
Email me when this product comes in stock
LOW PRICE GUARANTEE
EASY RETURNS
$500.00
On Backorder
Contact Us for Availability or Alternatives
Email me when this product comes in stock
LOW PRICE GUARANTEE
EASY RETURNS
- Fitment: Direct Fit
- Fully adjustable to fit all JL Wrangler models with different axle widths
- Heat treated chromoly construction improves tie rod stiffness, strength, and steering feel
- Eliminates any chance of bending this tie rod
- Offers a more direct connection to the road/trail compared to stock
- New Synergy Heavy Duty Metal on Metal Tie Rod Ends are stronger and more durable than stock
- Includes grease fittings/replaceable dust boots for ease of maintenance
- Single plane tie rod end used to eliminate unwanted tie rod flop and prevent the steering deadspot encountered with hydro assist setups
- Simplifies installation and only allows necessary degree of movement of the bar
- Double Adjuster assembly allows adjustment of tie rod length without removing it from the vehicle
- Tie Rod has an outer diameter (OD) of 1.50 inches
- Must use Synergy High Mount Steering Stabilizer kit, 8807-03
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed!
Qualifies for Free Shipping
4WP PROTECTION PLAN
Our Protection Plan covers your investment above and beyond the manufacturer's coverage. For only 10% more, if your item is damaged, fails or malfunctions, we'll replace it for free!
Sign In Or Create an Account
Reset Password
An email is sent to .
Enter email address to change your password
After you submit your email address, you'll receive an email a link that will let you change your password.
Choose Your Secure Checkout Method
Create An Account
Add to Wishlist
Synergy Manufacturing Jeep JK/WJ Heavy Duty Ball Joint Set - 8009-12
- Fitment: Direct Fit
- Factory Replacement for Most Dana 44 and Dana 30 Applications
- Fully Greasable
- Sintered Metal On Bushing Design
- Silicone Boot
- 2 Upper Ball Joints
- 2 Lower Ball Joints
- Fits Jeep JK and WJ Including Rubicon
- Made in the USA
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed!
Qualifies for Free Shipping
$250.00
$250.00
On Backorder
Contact Us for Availability or Alternatives
LOW PRICE GUARANTEE
EASY RETURNS
Email me when this product comes in stock
LOW PRICE GUARANTEE
EASY RETURNS
$250.00
$250.00
On Backorder
Contact Us for Availability or Alternatives
Email me when this product comes in stock
LOW PRICE GUARANTEE
EASY RETURNS
- Fitment: Direct Fit
- Factory Replacement for Most Dana 44 and Dana 30 Applications
- Fully Greasable
- Sintered Metal On Bushing Design
- Silicone Boot
- 2 Upper Ball Joints
- 2 Lower Ball Joints
- Fits Jeep JK and WJ Including Rubicon
- Made in the USA
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed!
Qualifies for Free Shipping
4WP PROTECTION PLAN
Our Protection Plan covers your investment above and beyond the manufacturer's coverage. For only 10% more, if your item is damaged, fails or malfunctions, we'll replace it for free!
Sign In Or Create an Account
Reset Password
An email is sent to .
Enter email address to change your password
After you submit your email address, you'll receive an email a link that will let you change your password.
Choose Your Secure Checkout Method
Create An Account
Add to Wishlist
Synergy Manufacturing Jeep JL Adjustable Front Lower Control Arm Set - 8851-01
How to Get it
Free! Curbside & In-Store Pickup: Select A Store Near You
Ship to Home:
In-Stock Ships next business day ?- Fitment: Direct Fit
- Increases articulation
- Maintenance free, no greasing required
- Adjustable without removing from vehicle
- No jam nuts that are impossible to keep tight
- No modifications required to install
- Made from high quality crush resistant 1 3/4 inch X .188 wall 1026 DOM tubing
- Tubing size allows the best combination of strength and weight savings
- Control arms are designed and manufactured to maximize wheel and ground clearance
- Control arm bushing housing is offset to the control arm tube on the axle side so no modifications need to be made to the control arm brackets to install
- Control arms provide more clearance for larger tires
- Features Synergy Dual Durometer Bushings (DDB) with Teflon bearing surface for a maintenance free design focusing on performance, flex, longevity, and ride quality
- Synergy double adjuster sleeve & pinch bolt assembly allows for adjustment of control arm length without removing control arm mounting bolt
- Adjustable from stock length to 1.5 inches longer than stock
- Suspension components feature an abrasion-resistant powder coat finish for maximum durability and corrosion resistance
- 100% bolt on components assures an easy, trouble free installation with the use of basic hand tools
- Sold in pairs
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed!
Qualifies for Free Shipping
$500.00
In-Stock Ships next business day ?
$500.00
In-Stock Ships next business day
?
LOW PRICE GUARANTEE
EASY RETURNS
How to Get it
Free! Curbside & In-Store Pickup: Select A Store Near You
Ship to Home:
In-Stock Ships next business day ?- Fitment: Direct Fit
- Increases articulation
- Maintenance free, no greasing required
- Adjustable without removing from vehicle
- No jam nuts that are impossible to keep tight
- No modifications required to install
- Made from high quality crush resistant 1 3/4 inch X .188 wall 1026 DOM tubing
- Tubing size allows the best combination of strength and weight savings
- Control arms are designed and manufactured to maximize wheel and ground clearance
- Control arm bushing housing is offset to the control arm tube on the axle side so no modifications need to be made to the control arm brackets to install
- Control arms provide more clearance for larger tires
- Features Synergy Dual Durometer Bushings (DDB) with Teflon bearing surface for a maintenance free design focusing on performance, flex, longevity, and ride quality
- Synergy double adjuster sleeve & pinch bolt assembly allows for adjustment of control arm length without removing control arm mounting bolt
- Adjustable from stock length to 1.5 inches longer than stock
- Suspension components feature an abrasion-resistant powder coat finish for maximum durability and corrosion resistance
- 100% bolt on components assures an easy, trouble free installation with the use of basic hand tools
- Sold in pairs
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed!
Qualifies for Free Shipping
4WP PROTECTION PLAN
Our Protection Plan covers your investment above and beyond the manufacturer's coverage. For only 10% more, if your item is damaged, fails or malfunctions, we'll replace it for free!
Sign In Or Create an Account
Reset Password
An email is sent to .
Enter email address to change your password
After you submit your email address, you'll receive an email a link that will let you change your password.
Choose Your Secure Checkout Method
Create An Account
Add to Wishlist
AMP PowerStep Plug And Play Pass Through Harness - 76404-01A
How to Get it
Free! Curbside & In-Store Pickup: Select A Store Near You
Ship to Home:
In-Stock Ships next business day ?- Fitment: Universal Fit
- PowerStep
- Plug and Play Pass Through Harness
- Black
- For Use w/PN[76154]
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed!
Qualifies for Free Shipping
$119.99
In-Stock Ships next business day ?
$119.99
In-Stock Ships next business day
?
LOW PRICE GUARANTEE
EASY RETURNS
How to Get it
Free! Curbside & In-Store Pickup: Select A Store Near You
Ship to Home:
In-Stock Ships next business day ?- Fitment: Universal Fit
- PowerStep
- Plug and Play Pass Through Harness
- Black
- For Use w/PN[76154]
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed!
Qualifies for Free Shipping
4WP PROTECTION PLAN
Our Protection Plan covers your investment above and beyond the manufacturer's coverage. For only 10% more, if your item is damaged, fails or malfunctions, we'll replace it for free!
Sign In Or Create an Account
Reset Password
An email is sent to .
Enter email address to change your password
After you submit your email address, you'll receive an email a link that will let you change your password.
Choose Your Secure Checkout Method
Create An Account
Add to Wishlist
Synergy HD Steering Drag Link - 8800-01
How to Get it
Free! Curbside & In-Store Pickup: Select A Store Near You
Ship to Home:
In-Stock Ships next business day ?- Fitment: Direct Fit
- Fully adjustable to fit all JL Wrangler models with different axle widths
- Increased tubing wall thickness improves drag link strength and steering feel
- Offers a more direct connection to the road/trail compared to stock
- Bar is fully welded, unlike the crimped OEM design
- New Synergy Heavy Duty Metal on Metal Tie Rod Ends are stronger and more durable than stock
- Include grease fittings/replaceable dust boots for ease of maintenance
- Pitman arm side tie rod end is a single plane design to eliminate unwanted drag link flopDouble Adjuster assembly allows adjustment of drag link length without removing it from the vehicle
- Drag Link Flip Adapter is included for those who will be converting to high steer
- Front Track Bar Relocation Bracket required for high steer conversion
- Relocation of the drag link to the top of the knuckle for high steer requires 3 inch bump stop spacers, front track bar relocation bracket, and wheels with proper backspacing
- Synergy Double Adjuster Sleeve allows adjustment of drag link length without removing it from the vehicle
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed!
Qualifies for Free Shipping
$450.00
In-Stock Ships next business day ?
$450.00
In-Stock Ships next business day
?
LOW PRICE GUARANTEE
EASY RETURNS
How to Get it
Free! Curbside & In-Store Pickup: Select A Store Near You
Ship to Home:
In-Stock Ships next business day ?- Fitment: Direct Fit
- Fully adjustable to fit all JL Wrangler models with different axle widths
- Increased tubing wall thickness improves drag link strength and steering feel
- Offers a more direct connection to the road/trail compared to stock
- Bar is fully welded, unlike the crimped OEM design
- New Synergy Heavy Duty Metal on Metal Tie Rod Ends are stronger and more durable than stock
- Include grease fittings/replaceable dust boots for ease of maintenance
- Pitman arm side tie rod end is a single plane design to eliminate unwanted drag link flopDouble Adjuster assembly allows adjustment of drag link length without removing it from the vehicle
- Drag Link Flip Adapter is included for those who will be converting to high steer
- Front Track Bar Relocation Bracket required for high steer conversion
- Relocation of the drag link to the top of the knuckle for high steer requires 3 inch bump stop spacers, front track bar relocation bracket, and wheels with proper backspacing
- Synergy Double Adjuster Sleeve allows adjustment of drag link length without removing it from the vehicle
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed!
Qualifies for Free Shipping
4WP PROTECTION PLAN
Our Protection Plan covers your investment above and beyond the manufacturer's coverage. For only 10% more, if your item is damaged, fails or malfunctions, we'll replace it for free!
Sign In Or Create an Account
Reset Password
An email is sent to .
Enter email address to change your password
After you submit your email address, you'll receive an email a link that will let you change your password.
Choose Your Secure Checkout Method
Create An Account
Add to Wishlist
AMP Research BedStep2 Retractable Truck Bed Side Step - 75405-01A
How to Get it
Free! Curbside & In-Store Pickup: Select A Store Near You
Ship to Home:
In-Stock Ships next business day ?- Fitment: Universal Fit
- Toyota Tundra
- AMP Research BedStep2 box-side step
- Mounts to either side of the truck box
- High-strength die-cast, aluminum-alloy linkage components
- Military-spec, anodized and Teflon finish to resist corrosion
- Precision, stainless-steel pivot pins for rock-solid stability
- Non-slip, glass-reinforced composite step pad, big enough for two large boots
- 300 Lb. load capacity
- Easy bolt-on installation
- 3-year/36,000-mile warranty
- Designed and Made in the USA
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed!
Qualifies for Free Shipping
$329.99
In-Stock Ships next business day ?
$329.99
In-Stock Ships next business day
?
LOW PRICE GUARANTEE
EASY RETURNS
How to Get it
Free! Curbside & In-Store Pickup: Select A Store Near You
Ship to Home:
In-Stock Ships next business day ?- Fitment: Universal Fit
- Toyota Tundra
- AMP Research BedStep2 box-side step
- Mounts to either side of the truck box
- High-strength die-cast, aluminum-alloy linkage components
- Military-spec, anodized and Teflon finish to resist corrosion
- Precision, stainless-steel pivot pins for rock-solid stability
- Non-slip, glass-reinforced composite step pad, big enough for two large boots
- 300 Lb. load capacity
- Easy bolt-on installation
- 3-year/36,000-mile warranty
- Designed and Made in the USA
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed!
Qualifies for Free Shipping
4WP PROTECTION PLAN
Our Protection Plan covers your investment above and beyond the manufacturer's coverage. For only 10% more, if your item is damaged, fails or malfunctions, we'll replace it for free!
Sign In Or Create an Account
Reset Password
An email is sent to .
Enter email address to change your password
After you submit your email address, you'll receive an email a link that will let you change your password.
Choose Your Secure Checkout Method
Create An Account
Add to Wishlist
Synergy Manufacturing Heavy Duty Metal-on-Metal Tie Rod End - 4131-R
- Fitment: Direct Fit
- Fully greasable sintered metal on metal bushing design
- Tie Rod end boot is made from silicone and polyurethane
- 7/8-18 UNF RH Thread
- Spring loaded bearing design keeps pressure on bearings
- Made in the U.S.A
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed!
Qualifies for Free Shipping on Orders Over $99
$60.00
On Backorder
Contact Us for Availability or Alternatives
LOW PRICE GUARANTEE
EASY RETURNS
Email me when this product comes in stock
LOW PRICE GUARANTEE
EASY RETURNS
$60.00
On Backorder
Contact Us for Availability or Alternatives
Email me when this product comes in stock
LOW PRICE GUARANTEE
EASY RETURNS
- Fitment: Direct Fit
- Fully greasable sintered metal on metal bushing design
- Tie Rod end boot is made from silicone and polyurethane
- 7/8-18 UNF RH Thread
- Spring loaded bearing design keeps pressure on bearings
- Made in the U.S.A
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed!
Qualifies for Free Shipping on Orders Over $99
4WP PROTECTION PLAN
Our Protection Plan covers your investment above and beyond the manufacturer's coverage. For only 10% more, if your item is damaged, fails or malfunctions, we'll replace it for free!
Sign In Or Create an Account
Reset Password
An email is sent to .
Enter email address to change your password
After you submit your email address, you'll receive an email a link that will let you change your password.
Choose Your Secure Checkout Method
Create An Account
Add to Wishlist
Synergy Manufacturing Rear Lower Shock Mount Kit - 8074
How to Get it
Free! Curbside & In-Store Pickup: Select A Store Near You
Ship to Home:
Only 1 left in Stock ?- Fitment: Universal Fit
- 07-18 Wrangler JK, 2 & 4 Door
- Manufactured from laser cut 3/16 inch steel and CNC bent for superior durability
- Moves lower shock mounts up and out of harms way
- Relocates shock mount for increased ground clearance
- Adjustable to .28 inch, 1.09 inch, 1.91 inch higher than stock
- Stock shock mounts are prone to extreme trail abuse because of low clearance
- Sold as a pair
- Made in the U.S.A
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed!
Qualifies for Free Shipping
$100.00
Only 1 left in Stock ?
$100.00
Only 1 left in Stock
?
LOW PRICE GUARANTEE
EASY RETURNS
How to Get it
Free! Curbside & In-Store Pickup: Select A Store Near You
Ship to Home:
Only 1 left in Stock ?- Fitment: Universal Fit
- 07-18 Wrangler JK, 2 & 4 Door
- Manufactured from laser cut 3/16 inch steel and CNC bent for superior durability
- Moves lower shock mounts up and out of harms way
- Relocates shock mount for increased ground clearance
- Adjustable to .28 inch, 1.09 inch, 1.91 inch higher than stock
- Stock shock mounts are prone to extreme trail abuse because of low clearance
- Sold as a pair
- Made in the U.S.A
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed!
Qualifies for Free Shipping
4WP PROTECTION PLAN
Our Protection Plan covers your investment above and beyond the manufacturer's coverage. For only 10% more, if your item is damaged, fails or malfunctions, we'll replace it for free!
Sign In Or Create an Account
Reset Password
An email is sent to .
Enter email address to change your password
After you submit your email address, you'll receive an email a link that will let you change your password.
Choose Your Secure Checkout Method
Create An Account
Add to Wishlist
Synergy Manufacturing Jeep Dana 30/44 Heavy Duty Ball Joint Set - 4120
How to Get it
Free! Curbside & In-Store Pickup: Select A Store Near You
Ship to Home:
In-Stock Ships next business day ?- Fitment: Direct Fit
- Factory Replacement for Most Dana 44 and Dana 30 Applications
- Fully Greasable
- Sintered Metal On Bushing Design
- Silicone Boot
- 2 Upper Ball Joints
- 2 Lower Ball Joints
- Fits All Jeep TJ / LJ
- Fits 90-01 Jeep YJ / ZJ / XJ
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed!
Qualifies for Free Shipping
$250.00
$250.00
In-Stock Ships next business day ?
$250.00
$250.00
In-Stock Ships next business day
?
LOW PRICE GUARANTEE
EASY RETURNS
How to Get it
Free! Curbside & In-Store Pickup: Select A Store Near You
Ship to Home:
In-Stock Ships next business day ?- Fitment: Direct Fit
- Factory Replacement for Most Dana 44 and Dana 30 Applications
- Fully Greasable
- Sintered Metal On Bushing Design
- Silicone Boot
- 2 Upper Ball Joints
- 2 Lower Ball Joints
- Fits All Jeep TJ / LJ
- Fits 90-01 Jeep YJ / ZJ / XJ
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed!
Qualifies for Free Shipping
4WP PROTECTION PLAN
Our Protection Plan covers your investment above and beyond the manufacturer's coverage. For only 10% more, if your item is damaged, fails or malfunctions, we'll replace it for free!
Sign In Or Create an Account
Reset Password
An email is sent to .
Enter email address to change your password
After you submit your email address, you'll receive an email a link that will let you change your password.
Choose Your Secure Checkout Method
Create An Account
Add to Wishlist
AMP-Research Powerstep Controller Standard Type B Black - 19-04280-STB
How to Get it
Free! Curbside & In-Store Pickup: Select A Store Near You
Ship to Home:
In-Stock Ships next business day ?- Ford Excursion 2002-2003
- Powerstep Controller
- California Residents: WARNING
PROMOTIONS AUTOMATICALLY APPLIED
SHOP 4WP's HUGE SELECTION
Lowest Price! Guaranteed!
Qualifies for Free Shipping
$112.12
In-Stock Ships next business day ?
$112.12
In-Stock Ships next business day
?
LOW PRICE GUARANTEE
EASY RETURNS
How to Get it
Free! Curbside & In-Store Pickup: Select A Store Near You
Ship to Home:
In-Stock Ships next business day ?- Ford Excursion 2002-2003
- Powerstep Controller
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
SHOP 4WP's HUGE SELECTION
Lowest Price! Guaranteed!
4WP PROTECTION PLAN
Our Protection Plan covers your investment above and beyond the manufacturer's coverage. For only 10% more, if your item is damaged, fails or malfunctions, we'll replace it for free!
Sign In Or Create an Account
Reset Password
An email is sent to .
Enter email address to change your password
After you submit your email address, you'll receive an email a link that will let you change your password.
Choose Your Secure Checkout Method
Create An Account
Add to Wishlist
Part Number: SYN4112-5-45-50-H
Synergy Manufacturing Wheel Spacers - 4112-5-45-50-H
How to Get it
Free! Curbside & In-Store Pickup: Select A Store Near You
Ship to Home:
In-Stock Ships next business day ?- Fitment: Universal Fit
- 5x4.5 to 5x5 Bolt Pattern
- 1.50 inch thick
- Wheel hub centric for increased strength
- CNC Machined from billet 6061-T6 aluminum
- Features corrosion resistant red anodizing
- High grade wheel studs and lug nuts
- Can be used with factory or after market wheels
- Includes Loctite
- Sold As A Pair
- Made in the U.S.A
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed!
Qualifies for Free Shipping
$110.00
In-Stock Ships next business day ?
$110.00
In-Stock Ships next business day
?
LOW PRICE GUARANTEE
EASY RETURNS
How to Get it
Free! Curbside & In-Store Pickup: Select A Store Near You
Ship to Home:
In-Stock Ships next business day ?- Fitment: Universal Fit
- 5x4.5 to 5x5 Bolt Pattern
- 1.50 inch thick
- Wheel hub centric for increased strength
- CNC Machined from billet 6061-T6 aluminum
- Features corrosion resistant red anodizing
- High grade wheel studs and lug nuts
- Can be used with factory or after market wheels
- Includes Loctite
- Sold As A Pair
- Made in the U.S.A
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed!
Qualifies for Free Shipping
4WP PROTECTION PLAN
Our Protection Plan covers your investment above and beyond the manufacturer's coverage. For only 10% more, if your item is damaged, fails or malfunctions, we'll replace it for free!
Sign In Or Create an Account
Reset Password
An email is sent to .
Enter email address to change your password
After you submit your email address, you'll receive an email a link that will let you change your password.
Choose Your Secure Checkout Method
Create An Account
Add to Wishlist
Synergy Manufacturing Hub Centric Wheel Spacers - 4112-5-45-H
How to Get it
Free! Curbside & In-Store Pickup: Select A Store Near You
Ship to Home:
Only 4 left in Stock ?- Fitment: Universal Fit
- 5x4.5 Bolt Pattern
- Wheel hub centric for increased strength
- 1.50 inch thick
- CNC Machined from billet 6061-T6 aluminum
- Features corrosion resistant red anodizing
- High grade wheel studs and lug nuts
- Can be used with factory or after market wheels
- Includes Loctite
- Sold as a pair
- Made in the U.S.A
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed!
Qualifies for Free Shipping
$110.00
Only 4 left in Stock ?
$110.00
Only 4 left in Stock
?
LOW PRICE GUARANTEE
EASY RETURNS
How to Get it
Free! Curbside & In-Store Pickup: Select A Store Near You
Ship to Home:
Only 4 left in Stock ?- Fitment: Universal Fit
- 5x4.5 Bolt Pattern
- Wheel hub centric for increased strength
- 1.50 inch thick
- CNC Machined from billet 6061-T6 aluminum
- Features corrosion resistant red anodizing
- High grade wheel studs and lug nuts
- Can be used with factory or after market wheels
- Includes Loctite
- Sold as a pair
- Made in the U.S.A
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed!
Qualifies for Free Shipping
4WP PROTECTION PLAN
Our Protection Plan covers your investment above and beyond the manufacturer's coverage. For only 10% more, if your item is damaged, fails or malfunctions, we'll replace it for free!
Sign In Or Create an Account
Reset Password
An email is sent to .
Enter email address to change your password
After you submit your email address, you'll receive an email a link that will let you change your password.
Choose Your Secure Checkout Method
Create An Account
Add to Wishlist
Synergy Manufacturing Front Track Bar Relocation Bracket - 8055
How to Get it
Free! Curbside & In-Store Pickup: Select A Store Near You
Ship to Home:
In-Stock Ships next business day ?- Fitment: Direct Fit
- Compatible with 3.0 inch and taller lifts
- Laser cut from 3/16 inch steel
- 2 stage powdercoat finish
- Made in the U.S.A
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed!
Qualifies for Free Shipping
$220.00
In-Stock Ships next business day ?
$220.00
In-Stock Ships next business day
?
LOW PRICE GUARANTEE
EASY RETURNS
How to Get it
Free! Curbside & In-Store Pickup: Select A Store Near You
Ship to Home:
In-Stock Ships next business day ?- Fitment: Direct Fit
- Compatible with 3.0 inch and taller lifts
- Laser cut from 3/16 inch steel
- 2 stage powdercoat finish
- Made in the U.S.A
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed!
Qualifies for Free Shipping
4WP PROTECTION PLAN
Our Protection Plan covers your investment above and beyond the manufacturer's coverage. For only 10% more, if your item is damaged, fails or malfunctions, we'll replace it for free!
Sign In Or Create an Account
Reset Password
An email is sent to .
Enter email address to change your password
After you submit your email address, you'll receive an email a link that will let you change your password.
Choose Your Secure Checkout Method
Create An Account
Add to Wishlist
Synergy Manufacturing Front Axle Truss - 8012-15
How to Get it
Free! Curbside & In-Store Pickup: Select A Store Near You
Ship to Home:
Only 2 left in Stock ?- Fitment: Direct Fit
- 07-18 Wrangler JK, 2 & 4 Door
- Dana 44 front axle
- Strengthens factory JK axle housing
- Formed design significantly reduces installation time compared to multi-piece designs
- Replaces weak stock passenger side upper control arm mount and includes BOTH passenger side and driver side
- Dual Durometer Bushings (DDB) for axle housing
- Utilizes OEM size bushings - no proprietary sizes to commit to
- Synergy Dual Durometer Bushings (DDB) feature a Teflon bearing surface for a maintenance free design focusing on performance, flex, longevity, and ride quality
- Compatible with stock, Synergy Bolt-On and Synergy Weld-On track bar relocation brackets
- CNC formed 3/16" steel construction
- Requires cutting/welding experience - should be installed by experienced welder/fabricator
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed!
Qualifies for Free Shipping
$200.00
Only 2 left in Stock ?
$200.00
Only 2 left in Stock
?
LOW PRICE GUARANTEE
EASY RETURNS
How to Get it
Free! Curbside & In-Store Pickup: Select A Store Near You
Ship to Home:
Only 2 left in Stock ?- Fitment: Direct Fit
- 07-18 Wrangler JK, 2 & 4 Door
- Dana 44 front axle
- Strengthens factory JK axle housing
- Formed design significantly reduces installation time compared to multi-piece designs
- Replaces weak stock passenger side upper control arm mount and includes BOTH passenger side and driver side
- Dual Durometer Bushings (DDB) for axle housing
- Utilizes OEM size bushings - no proprietary sizes to commit to
- Synergy Dual Durometer Bushings (DDB) feature a Teflon bearing surface for a maintenance free design focusing on performance, flex, longevity, and ride quality
- Compatible with stock, Synergy Bolt-On and Synergy Weld-On track bar relocation brackets
- CNC formed 3/16" steel construction
- Requires cutting/welding experience - should be installed by experienced welder/fabricator
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed!
Qualifies for Free Shipping
4WP PROTECTION PLAN
Our Protection Plan covers your investment above and beyond the manufacturer's coverage. For only 10% more, if your item is damaged, fails or malfunctions, we'll replace it for free!
Sign In Or Create an Account
Reset Password
An email is sent to .
Enter email address to change your password
After you submit your email address, you'll receive an email a link that will let you change your password.
Choose Your Secure Checkout Method
Create An Account
Add to Wishlist
Synergy Rear Axle Truss - 8072-06
How to Get it
Free! Curbside & In-Store Pickup: Select A Store Near You
Ship to Home:
Only 2 left in Stock ?- Fitment: Direct Fit
- Rear truss
- Strengthens factory JK axle housing
- Formed design significantly reduces installation time compared to multi-piece designs
- Compatible with stock, Synergy bolt-on, and Synergy weld-on track bar relocation brackets
- CNC formed 3/16 inch steel construction
- Seams welded
- Compatible with both Rubicon and non-Rubicon Jeeps
- Does not require additional bump-stop spacer height
- Requires cutting/welding experience - should be installed by experienced welder/fabricator
- Axle truss and track bar brackets can be installed in any order
- Recommended to be used in conjunction with 8012-15 front axle truss
- Some trimming/fitment may be required due to slight variations from axle to axle
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed!
Qualifies for Free Shipping
$200.00
Only 2 left in Stock ?
$200.00
Only 2 left in Stock
?
LOW PRICE GUARANTEE
EASY RETURNS
How to Get it
Free! Curbside & In-Store Pickup: Select A Store Near You
Ship to Home:
Only 2 left in Stock ?- Fitment: Direct Fit
- Rear truss
- Strengthens factory JK axle housing
- Formed design significantly reduces installation time compared to multi-piece designs
- Compatible with stock, Synergy bolt-on, and Synergy weld-on track bar relocation brackets
- CNC formed 3/16 inch steel construction
- Seams welded
- Compatible with both Rubicon and non-Rubicon Jeeps
- Does not require additional bump-stop spacer height
- Requires cutting/welding experience - should be installed by experienced welder/fabricator
- Axle truss and track bar brackets can be installed in any order
- Recommended to be used in conjunction with 8012-15 front axle truss
- Some trimming/fitment may be required due to slight variations from axle to axle
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed!
Qualifies for Free Shipping
4WP PROTECTION PLAN
Our Protection Plan covers your investment above and beyond the manufacturer's coverage. For only 10% more, if your item is damaged, fails or malfunctions, we'll replace it for free!
Sign In Or Create an Account
Reset Password
An email is sent to .
Enter email address to change your password
After you submit your email address, you'll receive an email a link that will let you change your password.
Choose Your Secure Checkout Method
Create An Account
Add to Wishlist
AMP PowerStep Override Switch - 79106-01A
How to Get it
Free! Curbside & In-Store Pickup: Select A Store Near You
Ship to Home:
In-Stock Ships next business day ?- Fitment: Universal Fit
- Works only with new type controller with 8 pin and 9 pin plug
- Allows the PowerStep, PowerStep XL, and the PowerStep XTreme to be manually raised or lowered
- The toggle switch can be easily installed on the dash and is wired directly to the PowerStep Controller
- Override Retract (Up) keeps the steps up and out of the way, regardless of what you do with the doors
- Automatic Mode (Middle) steps are activated by the doors, deploying when the doors are opened, retracting when they're closed
- Override Deploy (Down) keeps the steps down and ready for use, regardless of what you do with the doors
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed!
Qualifies for Free Shipping on Orders Over $99
$59.99
In-Stock Ships next business day ?
$59.99
In-Stock Ships next business day
?
LOW PRICE GUARANTEE
EASY RETURNS
How to Get it
Free! Curbside & In-Store Pickup: Select A Store Near You
Ship to Home:
In-Stock Ships next business day ?- Fitment: Universal Fit
- Works only with new type controller with 8 pin and 9 pin plug
- Allows the PowerStep, PowerStep XL, and the PowerStep XTreme to be manually raised or lowered
- The toggle switch can be easily installed on the dash and is wired directly to the PowerStep Controller
- Override Retract (Up) keeps the steps up and out of the way, regardless of what you do with the doors
- Automatic Mode (Middle) steps are activated by the doors, deploying when the doors are opened, retracting when they're closed
- Override Deploy (Down) keeps the steps down and ready for use, regardless of what you do with the doors
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed!
Qualifies for Free Shipping on Orders Over $99
4WP PROTECTION PLAN
Our Protection Plan covers your investment above and beyond the manufacturer's coverage. For only 10% more, if your item is damaged, fails or malfunctions, we'll replace it for free!
Sign In Or Create an Account
Reset Password
An email is sent to .
Enter email address to change your password
After you submit your email address, you'll receive an email a link that will let you change your password.
Choose Your Secure Checkout Method
Create An Account
Add to Wishlist
Synergy Manufacturing HD Metal on Metal Tie Rod End (7/8-18 LH) - 4131-L
How to Get it
Free! Curbside & In-Store Pickup: Select A Store Near You
Ship to Home:
In-Stock Ships next business day ?- Fitment: Direct Fit
- 07-18 Wrangler JK, 2 & 4 Door
- Left hand thread
- 4131-L are designed specifically to be used in the following Synergy products: 8000-01 Drag Link (knuckle side only), 8001 Drag Link (knuckle side only), 8002 Tie Rod
- Fully greasable sintered metal-on-metal bushing design has high wear resistance
- Specially designed grease grooves in the OD of the ball to allow for maximum lubrication
- Spring loaded bearing design keeps pressure on bearings and keeps the joint tight as it wears
- Forged bearing housing made from 1018 steel for a strong, smooth, bearing surface
- Tie Rod End stud made from 4140 steel with an induction heat treated bearing surface for smooth operation and maximum life
- Single Plane tie rod ends offer misalignment in one direction of movement only. This eliminates drag link flop on the products they are designed for
- Outperforms the factory and all other aftermarket style tie rod ends by offering a larger shank with no stress riser (doesn't neck down at base) and elimination of the nylon ball race
- Boots are made from tear/wear resistant black NBR and come with retaining springs
- Includes all necessary hardware for installation
- Synergy High Performance Grease (4119) is the recommended grease for this product
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed!
Qualifies for Free Shipping on Orders Over $99
$60.00
In-Stock Ships next business day ?
$60.00
In-Stock Ships next business day
?
LOW PRICE GUARANTEE
EASY RETURNS
How to Get it
Free! Curbside & In-Store Pickup: Select A Store Near You
Ship to Home:
In-Stock Ships next business day ?- Fitment: Direct Fit
- 07-18 Wrangler JK, 2 & 4 Door
- Left hand thread
- 4131-L are designed specifically to be used in the following Synergy products: 8000-01 Drag Link (knuckle side only), 8001 Drag Link (knuckle side only), 8002 Tie Rod
- Fully greasable sintered metal-on-metal bushing design has high wear resistance
- Specially designed grease grooves in the OD of the ball to allow for maximum lubrication
- Spring loaded bearing design keeps pressure on bearings and keeps the joint tight as it wears
- Forged bearing housing made from 1018 steel for a strong, smooth, bearing surface
- Tie Rod End stud made from 4140 steel with an induction heat treated bearing surface for smooth operation and maximum life
- Single Plane tie rod ends offer misalignment in one direction of movement only. This eliminates drag link flop on the products they are designed for
- Outperforms the factory and all other aftermarket style tie rod ends by offering a larger shank with no stress riser (doesn't neck down at base) and elimination of the nylon ball race
- Boots are made from tear/wear resistant black NBR and come with retaining springs
- Includes all necessary hardware for installation
- Synergy High Performance Grease (4119) is the recommended grease for this product
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed!
Qualifies for Free Shipping on Orders Over $99
