Front Gas Charged Front

80 Product Groups

Switch to View Products

SORT BY

FOX 2.0 Performance Series IFP Smooth Body Shocks

From $199.95

Black and aluminum finish
Body diameter: 2.0 inch
Travel: Application Specific
Shaft size: 5/
California Residents: WARNING

From $199.95

4.2 4.2 (35)

Bilstein OE Replacement DampTronic Series Shock Absorber

From $216.00

Electronic adjustment system developed specifically for each application
Adjustable setting levels for the most dynamic driving experience
Ability to switch instantly between settings to suit driving conditions
Threaded body adjustable range of 20mm at both axles, while installed
Lowering of approx. 30-50 mm at front and rear
Road-tested and fine-tuned by BILSTEIN ride engineers, under extreme motorsports conditions
Spring plates and lock nuts made from a special aluminium alloy
Surface coating using Triple-C-Technology® for long-lasting corrosion resistance
Round threads for easy adjustment
Quality sport springs made from highly durable material
Gas pressure technology
BILSTEIN monotube technology, made in Germany
California Residents: WARNING

From $216.00

Bilstein B4 OE Replacement Strut Assembly

From $103.00

3.7 3.7 (9)

Skyjacker Nitro Shocks

From $56.58

Nitro Shock Absorber
Red Boot
Sold As: Single
California Residents: WARNING

From $56.58

4.3 4.3 (492)

ICON Vehicle Dynamics Front Remote Reservoir Coilover Kits

From $2,099.95

25% increase in wheel travel over stock
Vehicle specific tuned front and rear shocks for superior shock damping and control
Improved ride quality over stock on and off road
6061 Aircraft grade aluminum CNC machined components
Corrosion resistant CAD plated shock body with 7/8" shaft
FK Rod End bearings for extended longevity and minimal deflection
California Residents: WARNING

From $2,099.95

Rock Krawler Remote Reservoir Coil-Over Shocks

From $2,633.87

2.625 inch O.D. Fluted Aluminum Shock Body
Military Grade Hard Anodized Surface
Cooling Surface Area of a 3.0 Coil Over
1.0 inch Nitrotec Shaft
Billet Aluminum Valve Circuit and Components
Dual Spring Rate Slider
Serviceable/Rebuildable/Revalveable
California Residents: WARNING

From $2,633.87

Skyjacker 4.5 - 6 Inch Lift Kits

From $2,111.63

Skyjacker suspension systems and components are engineered by real off-road enthusiasts and extensively field tested to ensure that every shock, spring, and complete lift kit it produces is Rock Ready
Designed to take you wherever you want to go!
Skyjacker will take your truck to new heights with the increased ground clearance you're after without sacrificing safety, control, or everyday drivability
Multiple Lift Kits for Jeeps available
California Residents: WARNING

From $2,111.63

Pro Comp PRO-M Monotube Shock Absorbers

From $107.99

2" body diameter
Durable silver powder coat finish
Monotube construction
Nitrogen gas charged
Vehicle specific valving
Multi-stage disc pack
14mm chrome hardened shaft
Polyurethane shock boots included
Great feel on-road, great performance off-road

From $107.99

4.0 4.0 (22)

FOX 2.5 Factory Race Series Coilover Shocks

From $1,999.95

Smooth bore and honed seamless steel body
Zinc plated for a long-lasting finish
Black anodized, CNC machined 6061-T6 billet aluminum
7075 hard-anodized high-flow aluminum piston
Tunable, velocity sensitive deburred valve shims
Reusable ORB O-ring port hose fittings for superior seal with remote reservoirs
High-temp Viton® redundant sealing pack system with main seal, wiper seal and scraper seal
JM92 Advanced Suspension Fluid for improved performance at variable temperatures
7/8" 17-4 H900 hard chrome plated stainless steel, hard chrome plated
Spherical, PFTE-lined, heat-treated alloy steel bearing
California Residents: WARNING

From $1,999.95

5.0 5.0 (1)

FOX 2.0 Performance Series Coilover IFP Shocks

From $259.95

2.0" Metal impacted 6061-T6 aluminum will resist rust over time
Clear-anodized for a durable finish
Internal IFP mono-tube reservoir design separates shock oil from the high-pressure nitrogen
Black-anodized, CNC-machined 6061-T6 billet aluminum
5/8" hard chrome plated heat-treated alloy steel shaft
Race-developed high-flow piston design
Application specific valving to maximize performance
Redundant sealing pack system main seal, wiper seal, scraper seal
JM92 Advanced Suspension Fluid for improved performance at variable temperatures
Large diameter, heavy-duty spherical bearing
Direct replacement for stock and aftermarket lifts kits
Ride height preload ring
California Residents: WARNING

From $259.95

3.7 3.7 (21)

FOX 2.5 Factory Race Series Coilover IFP Shock Sets

From $1,499.95

2.5" Smooth bore and honed seamless alloy bodies
Zinc-plated and double-clear coated for long lasting finish
Internal IFP mono-tube reservoir design separates shock oil from the high-pressure nitrogen
Black-anodized, CNC-machined 6061-T6 billet aluminum
Application specific, adjustable 3.0 Eibach® racing springs
7/8" hardened NitroSteel® Steel carbon shafts
6061-T6 hard-anodized, high flow aluminum piston
Application specific valving to maximize performance
Redundant sealing pack system main seal, wiper seal, scraper seal
JM92 Advanced Suspension Fluid for improved performance at variable temperatures
PTFE-lined, heat-treated, alloy steel spherical bearing
Direct replacement for stock and aftermarket lifts kits
Ride height preload ring
California Residents: WARNING

From $1,499.95

Pro Comp 2.5" PRO-VST Series Shocks

From $1,299.99

Sold as a pair
Hard anodized silver finish
Maximum off-road performance
2.5" body outer diameter paired with a full bore piston to maximize damping capability
6061-t6 impact forged aluminum body for increased strength and lower shock temperatures
Hard anodized body finish for increased strength and lower shock temperatures
Tuned specific to the vehicle application to maximize ride quality and suspension travel
17-4 stainless steel chrome plated shaft for strength and corrosion resistance
3/4" OD shaft for reduced seal friction and gas force
Internal floating piston separates nitrogen and oil to improve damping response and eliminate cavitation

From $1,299.99

FOX 2.0 Performance Series Reservoir Shocks

From $309.95

2.0" Metal impacted 6061-T6 aluminum will resist rust over time
Clear-anodized for a durable finish
2.0" Smooth bore 6061-T6 Aluminum is hard anodized
Black-anodized, CNC-machined 6061-T6 billet aluminum
5/8" hard chrome plated heat-treated alloy steel shaft
Race-developed high-flow piston design
Application specific valving to maximize performance
Redundant sealing pack system main seal, wiper seal, scraper seal
JM92 Advanced Suspension Fluid for improved performance at variable temperatures
Quiet nitrile rubber allows for increased suspension articulation
Direct replacement for stock and aftermarket lifts kits
California Residents: WARNING

From $309.95

3.9 3.9 (304)

FOX 2.0 Performance Series IFP Shocks

From $199.95

2.0" Metal impacted 6061-T6 aluminum will resist rust over time
Clear-anodized for a durable finish
Internal IFP mono-tube reservoir design separates shock oil from the high-pressure nitrogen
Black-anodized, CNC-machined 6061-T6 billet aluminum
5/8" hard chrome plated heat-treated alloy steel shaft
Race-developed high-flow piston design
Application specific valving to maximize performance
Redundant sealing pack system main seal, wiper seal, scraper seal
JM92 Advanced Suspension Fluid for improved performance at variable temperatures
Quiet nitrile rubber allows for increased suspension articulation
Direct replacement for stock and aftermarket lifts kits
California Residents: WARNING

From $199.95

4.0 4.0 (199)

Bilstein B6 Series HD Suspension Strut Assembly

From $113.00

Monotube gas pressure construction
Improved safety and sportiness
Added traction and enhanced stability
Increased durability and performance while maintaining ride comfort
Road-tested and fine-tuned by BILSTEIN for each vehicle specific application
California Residents: WARNING

From $113.00

4.5 4.5 (24)

Rough Country Leveling Lift Kits

From $329.95

Easy bolt-on installation
Maintains factory ride quality
Increased ground clearance
Levels the front with the rear of the vehicle
No need to disassemble your struts to install

From $329.95

4.3 4.3 (282)

Rough Country Performance Struts

From $329.95

Application specific velocity sensitive valving
Utilizes OEM coil spring
Maintains smooth, factory-like ride
Structurally engineered for lifted applications
Lifted, eliminating the need for strut spacers
Nitrogen gas charged to improve ride, handling, and reduce shock oil aeration
Offers improved tire contact with the road for increased stability and performance
Infinitely Variable Damping
Leak-proof piston seal
Special formulated low friction shock oil
Massive 1 3/8in bore
Hardened chromed piston rod provides superior corrosion resistance and enhances sealing properties
3-year limited warranty
Black powder coat finish
Sold as a pair

From $329.95

4.2 4.2 (28)

Rough Country Suspension Lift Kits

From $349.95

Gain increased ground clearance and incredible good looks with a kit from Rough Country
Most kits come with everything you need to overhaul your Truck or Jeep’s appearance while maintaining a factory-like ride quality
Most kits include Rough Country’s N3 Shocks
These 10-stage variable valving, high-pressure Nitrogen charged shocks offer a fantastic blend of off-road action and smooth highway ride quality
Durable 18mm spring-loaded piston rod and faster-cooling 54mm shock body
Includes Rough Country’s Lifetime Replacement Guarantee!

From $349.95

3.9 3.9 (15671)

Bilstein B8 8112 (ZoneControl CR)

From $1,091.00

ZoneControl® CR: Position sensitive damping with 3 compression zones and 2 rebound zones, controlled by 3 independent pistons
riple piston design delivers comfort during every day driving conditions and maximum control under large suspension inputs
Adjustable threaded spring seat allows for fine-tuned ride height. Adjustable range .6-2.5in
60mm remote reservoir for increased oil capacity and cooling
High quality chrome 5/8” heim joint mounting with rubber sealed misalignment spacers offer the most durable, load bearing mount solution
Factory rebuildable
Made in the USA
California Residents: WARNING

From $1,091.00

Rough Country N3 Shocks

From $99.95

10-stage variable valving
High pressure nitrogen charged
35mm piston
Chromed hardened 18mm piston rod
54mm shock body to dissipate heat faster
36kN tensile strength
Spring loaded piston rod seal
Military spec. fluid rated to –40° C
Rubber bushings for better absorption
Metallic silver paint
3-year manufacturer's warranty

From $99.95

4.3 4.3 (26)

Pro Comp PRO-X Shock Absorbers

From $15.00

2" body diameter
Smooth black finish
Twin tube construction
Nitrogen stabilized
Velocity sensitive valving
1-3/8" nylon banded piston
5/8" chrome hardened shaft
Optional shock boots sold separately
On-road and light off-road

From $15.00

3.8 3.8 (38)

ReadyLift SST3000 Shocks

From $49.95

Gas / Oil separated - eliminates cavitation
5/8" hard chrome plated shaft
Rebuildable and revalvable
Two-stage sealing system - Dirt out, oil in
Nitrogen charged internal chamber
Designed for use on leveled and mild lifted vehicles
Developed for use with larger oversized wheels and tires
Made in USA

From $49.95

ReadyLift Coilovers

From $1,599.95

ReadyLIFT-Bilstein 8125 Performance Coil-Over Upgrade
Exclusive design featuring Eibach ERO coil springs and customized shock valving
Includes ReadyLIFT brackets for mounting reservoir canister

From $1,599.95

5.0 5.0 (1)

ICON Vehicle Dynamics 2.5 Series Front Shocks

From $1,239.95

ICON’s internal “Bump Zone” increases damping by 20% to provide more control as the shock approaches full compression
Remote reservoir design improves heat dissipation to reduce shock fade during prolonged use
Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range
Nitrogen charged monotube design with piggyback reservoir
One piece digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road
7/8” diameter induction hardened, chrome plated shock shaft
PTFE lined spherical bearings and application specific mounting hardware
6061 aircraft grade aluminum CNC machined components
CAD plated, precision machined 1026 DOM steel shock body for maximum durability and corrosion resistance
100% Rebuildable
100% Revalveable
All ICON 2.5 Series Piggyback and Remote Reservoir shocks can be upgraded to ICON’s Compression Damping Control Valve (CDCV)
California Residents: WARNING