FOX 2.0 Performance Series Coilover IFP Shocks

A: Part # FOX983-02-050 (LIMITED ONE (1) YEAR WARRANTY ON SUSPENSION PRODUCTS) Fine print: Subject to the limitations, terms and conditions hereof, FOX warrants, to the original retail owner of each new FOX suspension product, that the FOX suspension product, when new, is free from defects in materials and workmanship. Unless otherwise required by law, this warranty expires one (1) year from the date of the original FOX suspension product retail purchase from an authorized FOX dealer or from a FOX authorized Original Equipment Manufacturer where FOX suspension is included as original equipment on a purchased vehicle. If law requires a warranty duration of greater than one (1) year, then, subject to the other provisions hereof, this warranty will expire at the end of the minimum warranty period required by such law.

A: Sold individually

A: Single 

A: For the '13 Silverado 1500 4x4, has a adjustable height of 0-2".

A: Sure no problem bro

A: Depending on your vehicle's year make and model: 0-1 or 0-2 inches of lift.

A: The PN: FOX983-02-050 is for 4WD trucks. Use PN: FOX985-24-096 | Front | RWD | 0-2" | (Without Air Ride | GAS) and the Rear Shock | RWD | 0-1.5" | PN: FOX985-24-032

A: The PN: FOX983-02-050 fits the 4WD trucks. | USE: PN: FOX985-24-096 (Without Air Ride | GAS ENGINE) Front RWD 0-2"

A: Yes, the FOX Performance Series 2.0 Coil-Over IFP Front Shock - PN: FOX985-02-136 | 19-ON Ram 1500, Front Coil-Over, PS, 2.0, IFP, 0-2” Lift | https://www.4wheelparts.com/sku/FOX/standard/605-01-268_REV_A-Color.pdf

A: No, this shock is sold individually.

A: PERFORMANCE SERIES 2.0 COIL-OVER IFP SHOCK (Trail Boss Models Fit 0" Lift Only) Front 0-2" PN: FOX985-02-134

A: FOX Factory Race Series 2.5 Coil-Over Reservoir Shock Set - # FOX883-02-073 or FOX Factory Race Series 2.5 Coil-Over Reservoir Shock Set with CDCV Adjusters - # FOX883-06-073

A: Per FOX Application Guide: Reuses stock mounting hardware. Not compatible with TRD Pro Springs. I would guess that any non TRD OE replacement style springs will work.

A: Sold individually

A: Per FOX application guide: 2WD 0-2” lift rear 985-24-032

A: This is for one coilover.

A: Per Fox Application guide: PERFORMANCE SERIES 2.0 SNAP RING COIL-OVER IFP SHOCK Reuses OE spring - 985-02-012 PERFORMANCE SERIES 2.0 COIL-OVER IFP SHOCK - 985-02-134

A: Hello Kevin, These specific shocks FOX985-02-005 are adjustable. They are designed for a Tundra with a 0-2" lift. There are 2.5 Fox Coil-overs are also for this gen Tundra, that are a higher price point and also require new upper control arms, but the 2.5 Fox Coil-overs are also adjustable and are designed for Tundras with a 0-3" lift. You can also call us if you have additional questions/concerns 877-474-4821. Thanks for checking us out.

A: What part number are you looking for? Please call our sales team and they can check inventory for you Toll Free: 1-877-474-4821

A: No, the 985-02-006 is for 0-2” lift. For 4-6” lift, use 883-02-063.

A: That may end up raising the front too much. I would not use leveling spacers with these Fox shocks

A: This is an adjustable coilover that gives 0-2” of lift

A: That is the price for one.

A: Yes, As long as you lower the coilovers to stock height. If combining for additional height, the height will cause the vehicle to not align properly.

A: The FOX Performance Series 2.0 Coil-Over IFP Front Shock - 985-02-136 will use a spanner wrench to adjust the coil from 0 to 2 inches of lift.

A: No it will not. For use with 2012-2018 Ford Ranger (T5) 4WD or RWD.

A: Yes, this coilover comes pre-assembled.

A: Yes, the front shocks are adjustable from 0-2".

A: No they are not. Trust me, I learned the hard way.

A: Yes

A: This is sold as one.

A: No these are for Ford Ranger models.

A: Thank you for your question, this Fox Performance Series Coilover will work with you 2009 Ford F-140 4wd.

A: No we do not sell it separately. Call Fox, it might be a service item through them.

A: These come set to a height to level the vehicle, however the height is adjustable between 0-2".

A: Hello ResSD, This is the price for 1 single unit, not for the pair. Thanks for checking us out, we appreciate your business.

A: Leveling

A: These shocks are not intended to lift or lower your vehicle.

A: Hi Taha, This FOX 2.0 Performance Series Coilover IFP Shock is sold individually

A: Hi George, No. The Fox Racing Shox 2.0 Performance Series Coilover IFP Shock is sold individually. Also this shock is listed as UNI and we give the shock lengths, but it is originally designed for foreign Toyota Hi-Lux and Fortuner vehicles that were never sold in the USA.

A: Hello Carlos, Yes, the FOX 2.0 Performance Series Coilover IFP Shock Part Number: FOX985-02-004 will fit the front of your vehicle. The rear shocks available are Part Number: FOX980-24-673, FOX883-24-006, FOX883-26-006 or FOX985-26-115. Any of the rear shock part numbers provided are a direct factory bolt-on installation. Thank you.

A: Hello John, No, they are preset and non-adjustable. Thank you.

A: Hello sicknick, Yes, the Fox Racing Shox Fox 2.0 Performance Series Coil-Over IFP Shock FOX985-02-015 will fit your vehicle application. They are a direct bolt-on installation. Thank you.

A: Hello Evan, The Fox Racing Shox 2.0 Performance Series Coilover IFP Shock FOX985-02-003 will be a much nicer ride on and off-road compared to your current set up. They are perfectly valved for your vehicle. I highly recommend them. thank you.

A: Hello giovanni, The coilover shock is only adjustable from 0" to 2" of lift. The FOX883-02-025, FOX883-02-130 and the FOX883-06-130 are adjustable from 0" to 3" of lift. Please Note: Lifting your vehicle over 2" will require and upper control arms. Thank you.

A: Hello posleen, Yes, the Fox Racing Shox 2.0 Performance Series Coilover IFP Shock FOX985-02-004 come with coil springs and are ready to install out of the box. Thank you.

A: Hello jose, The Fox Racing Shox 2.0 Performance Series Coilover IFP Shock are sold single. They are currently in stock but move quickly. Our inventory moves very fast.

A: Hello grogg, You will need to remove the leveling spacers to run the Fox Racing Shox 2.0 Performance Series Coilover IFP Shock FOX985-02-004 in your vehicle application. Thank you.

A: Hello hector, The Fox Racing Shox 2.0 Performance Series Coilover IFP Shock FOX983-02-045 will fit 2WD and 4x4

A: Hello Edward, Yes, this shock will fit your vehicle application. Thank you.

A: Hello Edward, We suggest the Fox Racing Shox 2.5 Factory Series Coilover Reservoir Shocks Part Number: FOX880-02-410 for your vehicle application.

A: Hello demostenes, Yes, the Fox Racing Shox 2.0 Performance Series Coilover IFP Shock Part Number: FOX985-02-004 will fit your vehicle. You can not stack spacer kits in conjunction with this shock. That creates major steering angle issues and catastrophic failure. You can add a CST 3.5 Inch Lift Spindle Kit Part Number: CSTCSS-T1-1 and run the Fox Racing Shox 2.0 Performance Series Coilover IFP Shock FOX985-02-004 for a 6.5" lift total.

A: Thanks for the inquiry C-ham, the Fox Racing Shox 2.0 Performance Series Coilover IFP Shock part # FOX985-02-004 we would have to special order these to your vehicle lift height. You can place a custom order at our call center 800-421-1050.

A: Hello Jake, the Fox Racing Shox 2.0 Performance Series Coilover IFP Shock part# FOX985-02-002 is adjustable up to 2 inches in height. Thank you for your inquiry.

A: Hello Dave, the Fox Racing Shox 2.0 Performance Series Coilover IFP Shocks can be run at stock height or adjusted up to 2 inches taller. Thank you for your question.

A: Glock36- Thanks for the question. The spring rate is 600 pounds per inch. The shock is designed for stock replacement and will give a 2 inch lift out of the box.

A: Hello L.A, Thank you for asking. The Fox Racing Shox 2.0 Performance Series Coilover IFP Shock will give you a 2" lift.

A: Thanks for the question. When using these as a replacement coil over is all dependent on the vehicle you are putting them on. You might have to design some custom mounts. Thank you.

A: Hello Felix, The photo for the Fox Racing Shox 2.0 Performance Series Coilover IFP Shock might not be the correct photo. We can only provide the photos given to us by the manufacture.We will try to get the correct photo to display. Thanks for the heads up!

A: Hello Ray ray, the Fox Racing Shox 2.0 Performance Series Coilover IFP Shocks will hold up well with the added weight you will be putting on your vehicle. Thank you for your inquiry.

A: Hello Vernon, The Fox Racing Shox 2.0 Performance Series Coilover IFP Shock will replace the Fabtech Dirt Logic 0-2.5"Coilovers.

A: Trev, Unfortunately no the Fox Racing Shox 2.0 Performance Series Coilover IFP Shock will not work with a spacer. Hope this helps!

A: Hello Trev, The Fox Racing Shox 2.0 Performance Series Coilover IFP Shock will fit on your truck. But I would not go over 3" if its a 4x4.

A: The Fox Racing Shox 2.0 Performance Series Coilover IFP Shock are sold individually. Hope this helps!

A: Hello Darrick, Thank you for asking. The Fox Racing Shox 2.0 Performance Series Coilover IFP Shock will work if your truck was stock height and had no lift. In order to gain some more clearance the proper way so you don't have alignment or ball joint issues would be to do a body lift. here is a link for a 3 inch body lift http://jo.my/uqqdzg

A: Hello newbie and thank you for your question! Fox Racing Shox 2.0 Performance Series Coilover IFP Shock will level out your Toyota. I hope my answer gets 4 Wheel Parts your business!

A: The Fox Racing Shox 2.0 Performance Series Coilover IFP Shock are ride height adjustable up to 3" of lift for the front. So you can just adjust them to the height you like.

A: David, The Tundra's usually have a natural rake that leaves the front end lower in the front by about 2 inches. When you install these coil overs it should eliminate the rake and make the truck sit level so nothing is usually done in the rear.

A: Thanks for the question Tanner Fox Racing Shox 2.0 Performance Series Coilover IFP Shock, FOX985-02-007 Yes, these are adjustable front coilovers. You can adjust them from stock height to 2 inches (leveling kit) of lift in the front on your vehicle. Thank you BJ Answer Box Sales Bdozois@4wheelparts.com 310-900-5500 x5125

A: Hello Jdubb, the Fox Racing Shox 2.0 Performance Series Coilover IFP Shocks are available for vehicles that are stock up to 6 inch lifts. Thank you for your inquiry.

A: Barry- Thanks for your question. The Fox Racing Shox 2.0 Performance Series Coilover IFP Shock does not lift your truck. I would recommend the pro comp pro runner EXPZX2003 for a lift and shock combo.

A: jkny- Thanks for the question. The Spring rate for the Fox Racing Shox 2.0 Performance Series Coilover IFP Shock is 600 lbs per inch.

A: Jkny- Thanks for the question. The Fox Racing Shox 2.0 Performance Series Coilover IFP Shock are adjustable up to 3 inches of lift.

A: Hello Dan, Thank you for the question. The Fox Racing Shox 2.0 Performance Series Coilover IFP Shock Part Number: FOX985-02-004 are sold single.

A: Thunderhorse- Thanks for the question. The Fox Racing Shox 2.0 Performance Series Coilover IFP Shock are sold individually.

A: Ramhead- Thank you for your question. The Fox Racing Shox 2.0 Performance Series Coilover IFP Shock will fit your 2012 Ram 1500 if the lift kit that you have uses the stock strut and spaces it down.

A: Hello Storm, Thank you for the question. Yes, this shock is ready to bolt-on directly out of the box. It will level the vehicle without any adjustment.

A: Zach- Thank you for your question. The Fox Racing Shox 2.0 Performance Series Coilover IFP Shock is designed for IFS rigs and has a travel of 5.43 inches.

A: Valeriy- Thank you for your question. The Fox Racing Shox 2.0 Performance Series Coilover IFP Shock will fit your 2010 Toyota Tundra With the pro comp 6 inch lift.

A: Hello Luke, No, You will still need to retain the 3" spacer with the Fox Racing Shox 2.0 Performance Series Coilover IFP Shock FOX985-02-002 installed. We do offer the Pro Comp M2.75 Coilover Shock Absorber EXP57097BMX http://jo.my/6oxjr2 This coilover will replace the coil spacer for your 6" Pro Comp Suspension lift kit. Thank you for the email.

A: Hello Matt, The Fox Racing Shox 2.0 Performance Series Coilover IFP Shock FOX985-02-007 can be adjusted from 0" to 2". Thank you for the email.

A: Hello gonzales, The Fox Racing Shox 2.0 Performance Series Coilover IFP Shock will give you 2.0" of lift without changing any front end parts. The only other way to lift the vehicle is the Pro Comp Suspension 2.5 Inch Leveling Kit EXP65225 http://jo.my/xlogfv. Thank you for the email.

A: Shadi- Thanks for the question. I show that these Fox 2.0 Performance series coil overs do include springs.

A: Hello Mike, The Fox Racing Shox 2.0 Performance Series Coilover IFP Shock FOX983-02-050 are adjustable from 0 inch to 2 inch is lift height. Thank you for the email.

A: Hello Jake, The Fox Racing Shox 2.0 Performance Series Coilover IFP Shock FOX983-02-050 are sold individually. Thank you for the email.

A: Shadi the Fox 2.0 performance shock FOX983-02-050 does come with the spring and will accept the leveling kit as they install just as stock.

A: This is a single FOX 2.0 Performance Series Coil-Over IFP Shock

A: Barrett, The Fox Racing Shox 2.0 Performance Series Coilover IFP Shock FOX983-02-045 is sold as each

A: Barrett, The Fox Racing Shox 2.0 Performance Series Coilover IFP Shock FOX983-02-045 yield 0" - 2.5" of lift. Please be aware of the maximum working angle of your vehicles CV axles and or drives haft angle. Without knowing what vehicle year, make, model and leveling kit part number we are working with it's difficult to give an exact answer.