FOX 2.0 Performance Series IFP Shocks

A: I really don't know the answer, but I can tell you this " the best thing to do is for you to go in to your nearest store or call them to make sure your getting what you need for your vehicle, best thing to do."

A: These fit my 2005 pilot. They seem pretty bouncy. Not sure I would do them again.

A: Factory shock is : Extended: 22.52 Compressed: 16.62 FOX shock is: Extended: 22.65 Compressed: 14.55 Shock should fit for lengths.

A: Rear

A: Hello Kyle, the Fox Racing Shox 2.0 Performance Series Shock part# FOX985-24-048 will fit the rear of an h3 hummer with 0-2 inches of lift. Thank you for your inquiry.

A: Sold individually

A: This is universal / no application data from FOX, use travel: 12.1, extended: 31.38 and collapsed: 19.00 measurements

A: This is a universal shock. Please measure your travel: 12.1, extended: 31.38 and collapsed: 19.00 (STEM TOP to EYELET)

A: Front # 980-24-648 : 2-3" 2WD PERFORMANCE SERIES 2.0 SMOOTH BODY IFP SHOCK (Does not fit torsion bar suspension) | Rear # 980-24-649 : 2-3" 2WD PERFORMANCE SERIES 2.0 SMOOTH BODY IFP SHOCK

A: FOX doesn't list a shock for the '87 Ford Bronco. Try Part Number: BIL24-184809 | Position: Front | Notes: -Auxiliary Shock -Mounted forward of coil spring || Part Number: BIL24-013284 | Position: Front Notes: -Primary Shock -Mounted rearward of coil spring

A: Yes it does.   You may want to call Fox also to confirm if you have anything other than a standard fitment.  

A: The FOX 2.0 Performance Series Smooth Body IFP Shock - FOX980-24-673 is only 0-1" of lift. Try the PN: BIL24-286244

A: These shocks are built to order, 6 + months per FOX.

A: No this is not.

A: Per FOX application guide: Front 4WD 0-2" 985-02-003 Rear 4WD 0-1" 980-24-672 They do not show a direct fit for rear at 3”.

A: Here are the 2011 F-150 SVT Raptor Fox recommends: FACTORY RACE SERIES 3.0 INTERNAL BYPASS COIL-OVER RESERVOIR SHOCK (PAIR) Front: 0-2" - PN: 883-02-046 | FACTORY RACE 3.0 INTERNAL BYPASS COIL-OVER RESERVOIR SHOCK (PAIR) -ADJUSTABLE Front: 0-2" - PN: 883-06-046 | FACTORY RACE SERIES 3.0 EXTERNAL BYPASS SHOCK (PAIR) Rear: 0-1" - PN: 883-02-047 | FACTORY RACE SERIES 3.0 EXTERNAL BYPASS QAB SHOCK (PAIR) Rear: 0-1" - PN: 883-09-047

A: This fits 2-4.5" lifts.

A: These are universal shocks that fit many vehicles. The best way to see if these will fit your Ranger is measure your shock locations when your truck is sitting level at ride height. These have eyelet mounts on both ends. Does your truck have these same mounts? Here are the lengths of this shock. If these equal what your measurements come out to, then they would fit. Extended length: 22.65 inches Compressed length: 14.55 inches Top and bottom eyelet mount

A: Shocks do not carry any weight. They are only for dampening the movement of the suspension.

A: Front shocks Part # 980-24-643 Rear shocks Part # 980-24-645 We have them in stock, Feel free to call into the sales line to place an order. If you live near a store you can set it up for in store pick up. Sales & Support Toll Free: 1-877-474-4821 Phone Sales (PT) Monday - Friday: 5 a.m. - 7 p.m. Saturday: 7 a.m. - 3 p.m. Sunday: 8 a.m. - 2 p.m.

A: No the shocks would be a different from front to rear. Feel free to call into the sales line to place an order. If you live near a store you can set it up for in store pick up. Sales & Support Toll Free: 1-877-474-4821 Phone Sales (PT) Monday - Friday: 5 a.m. - 7 p.m. Saturday: 7 a.m. - 3 p.m. Sunday: 8 a.m. - 2 p.m.

A: Front 980-24-643 Rear 980-24-645

A: Would be rear fitment. Will fit 0-2” lifts.

A: Sledhead04, this Fox shock is sold individually.

A: Yes we have this in stock. Would not be cheaper to buy a set of 4.

A: These are universal shocks so you would have to take the measurements to see if they would fit your truck or not. Also, these have eyelet mounts on both ends, so you can check that too. Extended length: 22.650 in. Collapsed length: 14.550 in.

A: That is one shock.

A: Technically, shocks do not carry weight. The spring/ torsion bar will carry the weight of vehicle. The shocks control the rate of movement for control. In a coil-over shock, the same rules apply. The Coil carries the weight. The shocks controls rate of movement.

A: Hey Vande, To better answer your question and be sure what to recommend we need to know the type of leveling kit. Here are some suggestions, but again we need to know the kit. Check out FOX985-24-204 for the front and for the rear possibly FOX985-24-020. Please call us, 877-474-4821. Thanks for checking us out.

A: These shocks are universal and fit many different vehicles.

A: Hello Danielsm33, These are not for an 2008 Suburban. A very similar shock are these: assuming the Suburban has no lift you can use FOX985-02-009 for the front (sold as single unit), or FOX980-24-660 for the rear (also sold as single unit). Below will be a link for a Fox catalog, the Chevy Suburbans are on page 6 (please consider the "lift" column to make sure it will fit your Suburban, and just search part number on our site). If you have additional shock fitment questions please call us at 877-474-4821. https://www.ridefox.com/dl/truck/FOX_TRUCK_APP-GUIDE.pdf

A: No, this shock is for a 0-1" lift.

A: This is a universal shock and not a direct-fit applicable to any specific vehicles.

A: Hello, They may, but we would need to know more information on your S10. Please call us so we can get you the correct shocks. 877-474-4821. Thanks for checking us out.

A: This is a front shock for 0-2" lift.

A: We need to know the year, make and model of your truck so we can assist you from here. Please call our sales team for further assistance Toll Free: 1-877-474-4821

A: This is a universal shock. As long as the mounting ends match and the lengths are what you need, it would fit: Extended 23.65 inches and Collapsed 15.05 inches.

A: You would need to purchase a level kit to level out the truck, Feel free to call into the sales line to place an order. If you live near a store you can set it up for in store pick up / install. Sales & Support Toll Free: 1-877-474-4821 Phone Sales (PT) Monday - Friday: 5 a.m. - 7 p.m. Saturday: 7 a.m. - 3 p.m. Sunday: 8 a.m. - 2 p.m.

A: This is a front shock.

A: Yes, the top mount has a threaded stem and the bottom mount has an eyelet.

A: This part is for the 2010 Hummer H3 and the image does not always exactly reflect the shock, however I cannot tell you for sure if this would fit your vehicle due to a lack of model specifications. If you would like to talk to a Customer Service Rep that can help figure out the exact shock for your vehicle please call us at 1-877-474-4821

A: Not this particular part number. This fits F250/F350 applications.

A: Hi Tanner, These Fox Racing Shox 2.0 Performance Series Smooth Body IFP Shock is a universal part and was not given an application by Fox. You will have to take measurements of your suspension travel from full droop to full up and figure out the length necessary for your lifted application. If you contact our customer service center @ 877-474-4821 they can provide more details for you.

A: Hi Braedyn, These Fox Racing Shox 2.0 Performance Series Smooth Body IFP Shocks are sold individually at the price listed.

A: Hello Mait, This part number is sold single. Thank you

A: Hello Brian, They are sold single. The correct matching rear part number is FOX980-24-647. Thank you.

A: Hello Milo, This is the correct part number for the front of your 2014 Ram 2500 4x4. The rear part number is FOX985-24-092. Thank you for the question.

A: Hello Johnny, The Fox Racing Shox 2.0 Performance Series IFP Shock FOX985-24-032 are sold single. Thank you for the question.

A: Thanks for the inquiry D, the Fox Racing Shox 2.0 Performance Series IFP Shock part # FOX980-24-646 is correct for the front and the rear is FOX980-24-647.

A: Hello Alex, The Fox Racing Shox Fox 2.0 Performance Series Smooth Body IFP Shock FOX983-02-086 are sold single. Thank you for the question.

A: Thanks for the inquiry Gmjeeper, the Fox Racing Shox 2.0 Performance Series IFP Shock part # FOX980-24-645 for your application use part # FOX985-24-042 front and FOX980-24-645 rear.

A: Thanks for the inquiry Gmjeeper, the Fox Racing Shox 2.0 Performance Series IFP Shock part # FOX980-24-645 this is incorrect , you'll need FOX985-24-042 front and FOX front and FOX980-24-645 rear

A: Hello Joshua, This shock will fit the rear of your vehicle with a 0" to 1" of lift. Thank you.

A: Hello Roosty, No, this shock is designed for a lifted application. Thank you.

A: Hello Nick, The Extended Length: 25.85" and Collapsed Length: 16.50". Thank you.

A: Hello Mark, Yes, the Fox Racing Shox Fox 2.0 Performance Series Smooth Body IFP Shock FOX985-24-070 will also fit the diesel LC80. Thank you.

A: Hello Jesse, Yes, the Fox Racing Shox 2.0 Performance Series IFP Shock FOX985-24-030 will fit your vehicle application. Thank you.

A: Hello james, Yes, the Fox Racing Shox 2.0 Performance Series IFP Shock FOX985-24-042 will fit your vehicle application.

A: Hello Cody, No, the Fox Racing Shox 2.0 Performance Series IFP Shock will not fit. We recommend the Pro Comp Suspension MX-6 Monotube Adjustable Shock Absorber Part Number: EXPMX6126. Thank you.

A: Hi Matt The FOX980-24-646 IS CORRECT FOR THE FRONT WITHN THE 2.5 INCH LIFT THE FOX 980-24-647 IS THE CORRECT NUMBER FOR THE REAR WITH A 1 INCH LIFT. THANK YOU JON SNYDER 4WHEELPARTS

A: Hello Project_Pat44, No, the Fox Racing Shox 2.0 Performance Series IFP Shock FOX980-24-673 will not fit your vehicle application. You will need the Part Number: BIL24-186971 Thank you.

A: Sir, here are the shock part#s for a 97 Landrover Disco with 2"lift 985-24-080 front 985-24-081 rear thank you for your question.

A: Hello Roughneck, The correct part numbers are FOX980-24-677 (Front) and FOX985-24-092 (Rear) for your vehicle. The FOX logo sits at the top of the shock. You can see the logo between the tire and the wheel well opening.

A: Thanks for the question. Fox Racing Shox 2.0 Performance Series IFP Shock These will work for the rear of your vehicle. The front, you will have to get a coil over. Thank you

A: Hello rhett, Thank you for asking. The Fox Racing Shox 2.0 Performance Series IFP Shock are only for 0-1 inches of lift for the rear.

A: Hello Logan, the Fox Racing Shox 2.0 Performance Series IFP Shock's will fit 4x4 trucks. Thank you for your question.

A: Hello New Jeeper, Thank you for asking. The Fox Racing Shox 2.0 Performance Series IFP Shock are available in different size lifts. Here is a link, enter your year, make and model to see if it is available for your vehicle http://jo.my/qdxr4o

A: Hello Codie65, Thank you for asking. Here is the proper front shock for a 1993-1998 Jeep Grand Cherokee with a 4" lift http://jo.my/y1atfq

A: Hello Michael, Thank you for asking. The Fox Racing Shox 2.0 Performance Series IFP Shock part#: FOX980-24-673 is only for 0-1" rear lift. Fox does not list any shocks for the tall of a lift.

A: Hello Toyotamen, the Fox Racing Shox 2.0 Performance Series IFP Shock's are available for your Tundra with a 6" suspension lift. Most 6" lifts only do a 4" rear block. Thank you for your inquiry.

A: Hello TundraMen and thank you for your question! Fox Racing Shox 2.0 Performance Series IFP Shock is made to fit your 2014 Tundra with a 6" Fabtech lift.

A: Hello Hunter, The Fox Racing Shox 2.0 Performance Series IFP Shock are sold individually.

A: Rodolfosolis1,Thanks for the question.Part #FOX985-24-070 weighs 7lbs & the Length is 41" Width is 2.5" Height is 2.5"

A: Hello Alex, the Fox Racing Shox 2.0 Performance Series IFP Shock part# FOX980-24-651 go for 129$ each. Thank you for your inquiry.

A: Hello George, the Fox Racing Shox 2.0 Performance Series IFP Shocks are available for your vehicle with a 3.5" lift. Thank you for your question.

A: Hello Boone. The Fox Racing Shox 2.0 Performance Series IFP Shock, part # FOX980-24-657, will work with the body lift on the 04' Ford F-150. Thank you

A: Hello Drew. The Fox Racing Shox 2.0 Performance Series IFP Shock, part # FOX980-24-648, will fit the front with coil springs only. Thank you

A: Hello Rob, Thank you for asking. Fox does not offer shocks for your vehicle.

A: Hello NIck from Bakersfield, CA and thank you for the inquiry on the Fox Racing Shox 2.0 Performance Series IFP Shock. Yes this will fit the rear of your 1999 Dodge Ram 1500 with a 3" lift block. Actually this shocks will fit if you have a 2-3.5" lift Here is link to get you back to the ordering page: http://jo.my/g51j6p.qrcode

A: Hello there, the Fox Racing Shox 2.0 Performance Series IFP Shock will work on front or back. There is no right or wrong answer. The shocks are application specific or work universal. We just need Year, Make and Model. Shop with us anytime, on your schedule. Browse 4WheelParts.com, call our customer service center, or come visit us in one of our stores. You can even save on shipping costs by shopping online and picking your order up in a store. No matter which method you prefer, we’re ready to help with excellent parts, advice, and service.

A: Hello 5LugThug, Thank you for the question. The Fox Racing Shox 2.0 Performance Series IFP Shock FOX980-24-648 will only fit the front of your vehicle with a 0" to 3" lift installed.

A: Hello Ron, the Fox Racing Shox 2.0 Performance Series IFP Shock part# FOX985-24-034 will work on your xterra with up to 1" of lift on the rear of the vehicle. Your 2.5" lift will stretch the shocks a little too far. Thank you for your inquiry.

A: Hello Jeff, the Fox Racing Shox 2.0 Performance Series IFP Shock part# FOX985-24-032 will fit the rear of your vehicle. Great shock choice as well! Thank you for your inquiry.

A: Hello there, this Fox Racing Shox 2.0 Performance Series IFP Shock part number FOX980-24-658 will not require a mounting adapter. This made for by year, make, and model. Shop with us anytime, on your schedule. Browse 4WheelParts.com, call our customer service center, or come visit us in one of our stores. You can even save on shipping costs by shopping online and picking your order up in a store. No matter which method you prefer, we’re ready to help with excellent parts, advice, and service.

A: Hello Taz, Fox Racing Shox 2.0 Performance Series IFP Shocks are a top of the line shock and should work great for towing on a F-150.

A: Hello Eric, Thank you for the question. No, the Fox Racing Shox 2.0 Performance Series IFP Shock Part Number: FOX980-24-648 is not a strut style shock. It's a smooth body shock.

A: Nate from washington. Thanks for the question. Fox Racing Shox 2.0 Performance Series IFP Shock part # FOX980-24-671 are good for a 0-2 lift.

A: Matt, Thank you for asking. Fox Racing Shox 2.0 Performance Series IFP Shock part# FOX985-24-019 will fit the following models. Dodge Ram 1500 4x4 94-01 Front 2.5"-3.5" 10.1" Dodge Ram 1500 4x4 Megacab 06-09 Front 2.5"-3.5" Dodge Ram 2500 4x4 94-13 Front 2.5"-3.5" Dodge Ram 3500 4x4 94-12 Front 2.5"-3.5" I hope this helps.

A: Hello Jdubb, the Fox Racing Shox 2.0 Performance Series IFP Shock do not fit the rear of your truck. A great comparable shock would be the pro comp prorunner part# expzx2042. Very similar design and they have the nice brushed metal finish. Thank you for your inquiry.

A: Hello Fancy Nancy, Thank you for the question. This shock will only fit the rear of your vehicle application.

A: Hello Will, Thank you for the question. The correct part number is (Rear) FOX980-24-645 and (Front) FOX980-24-643

A: Hello Justin, Thank you for the question. No, this shock only fits the rear of your vehicle with 0" to 1" of lift over the factory height.

A: Brian- Thank you for your question. The Fox Racing Shox 2.0 Performance Series IFP Shock will fit your 06 Ford F250 with 2.5 inches of lift.