Mountain Off-Road Enterprises Rock Proof Front Bumpers

From $1,352.78

• Bare steel or Black Powder Coat
• Made from 3/16 inch thick steel
• Front bumpers available with and without tube work
• Bumpers are available in stubby and full width sizes
• Rear bumper are available with and without provisions for tire carrier
• California Residents: WARNING

Road Armor Dakar Front Bumpers

From $3,707.97

• This Road Armor front end replacement improves approach angle
• Winch cavity designed around the Warn M8000, VR series or similar winch.
• Hot rolled and laser cut 3/16 inch Plate Steel
• 5 Stage Powdercoat Finish - Highly scratch resistant
• Proudly made Texas, USA
• Lights are not included.
• California Residents: WARNING

Fab Fours Front Full Metal Jacket Full Width Front Bumpers

From $1,329.99

• Designed for maximum tire clearance
• Optional winch plate (JPWP-1) or optional Winch Modifier (JK07-B1859-1)
• Accepts up to 10,000 lb. winches or smaller
• Accepts the WARN Power plant and Zeon winches
• Light cut outs for factory fog lights
• Optional cutouts for 2x2 Rigid Industries Surface Mount ?Dually? lights (Not included)
• 3/4 inch D-ring mounts
• 2 Stage matte black powder coat or bare steel (-B instead of -1)
• 3/16 inch Steel construction
• 100% Made in the USA
• California Residents: WARNING

Garvin Industries Front Bumpers

From $654.99

• Bumper is constructed from 2 inch x 5 inch x 3/16 inch tubular steel
• Includes heavy duty and stylish 1/4 inch aluminum end caps
• Clevis mounts are reinforced for vehicle retrieval
• Bumper includes a 2 inch receiver for added versatility
• Bumpers are compatible with Warn winches
• Warn winch mounting plate is required to mount winch to bumper.
• California Residents: WARNING

Rock Slide Engineering Front Bumpers

From $1,099.99

• Black powder coat
• Made from 3/16 inch alloy steel
• Winch Mount
• Aggressive styling
• California Residents: WARNING

Smittybilt XRC Gen2 Front Bumpers

From $719.99

• UHMW (ultra-high-molecular-weight polyethylene) to provide the ultimate protection for rock crawling
• Manufactured from 3/16-inch cold rolled steel with two-stage textured matte black finish
• Powdercoat finish - 5 year limited warranty
• Smittybilt limited lifetime warranty
• Lower design winch plate allows greater air flow and rated to accommodate up to 12k winch
• 1.75" diameter .120 wall overrider and kickers
• O.E. fog light provision and towable D-ring mounts
• California Residents: WARNING

Rough Country Front Bumpers

From $599.95

• Easy bolt-on installation
• Aggressive appearance
• Recessed winch plate
• Integrated fog light mounts
• Fog mounts work with factory fog lights
• Durable black carbon powdercoating
• Gain more tire clearance and achieve better approach angles
• Fairlead mounts to the outside of the bumper for ease of use
• Will accommodate most winches on the market

Smittybilt Adventure Series Front Bumpers

From $1,169.99

Rugged Ridge Venator Front Bumpers

From $949.99

• Muscular stamped steel construction
• Patented design features sculpted contours and sweeping arches
• Features built-in winch plate and massive 1-inch thick recovery hooks
• Octagonal pockets accept factory JL / JT fog lights
• Easy bolt-on installation

DV8 Offroad Front Bumpers

From $1,199.99

• 2 stage powder coat finish
• Modular 2 & 3 piece design
• Steel construction
• Accomodates up to a 12,500 lbs Winch
• Cut out holes for lights
• D-ring shackle mounts
• DV8 no hassle warranty

Addictive Desert Designs ADD PRO Front Bumpers

From $2,618.98

• Hammer Black powder coat finish
• Satin Black powder coat panel finish
• Universal light mount up to 6 cube lights or 20" curved light bar
• Built with .120" wall steel tubing
• California Residents: WARNING

Addictive Desert Designs Rock Fighter Front Bumpers

From $2,327.98

• Available with low profile top hoop or stinger
• Hammer black powder coat finish
• Satin black powder coat finish panels
• Mount for 20" radius LED or 5 cube lights
• California Residents: WARNING

Addictive Desert Designs Bomber Front Bumpers

From $1,939.98

• Modern plate steel design
• Full 3/16” aluminum skid plate
• Weighs less than the OEM front bumper
• Mounts for 3 Baja Designs LP6 round lights or 4 RIGID 360 6" round lights
• Retains OEM tow hooks
• Fully bolt-on
• Made in America

Rugged Ridge HD Front Bumpers

From $649.99

• Available in Stubby or Full Width
• Engineered to mount most any aftermarket winch
• Built-in jack lifting points at every corner
• Massive recovery hooks, each one dual-drilled to work with both 3/4 and 7/8-inch shackles
• Satin black powder coat finish
• Limited 5-year warranty

Rugged Ridge Spartan Front Bumpers

From $399.99

• One-piece design
• Features ultra-aggressive high clearance bumper ends that angle cleanly upward to match the profile of factory fender flares
• Built from high-strength plate steel that utilizes fold & weld construction for greater structural integrity, precise fit and a high-quality appearance
• Rugged textured black powder coat resists rust and corrosion
• Incorporates a stand-alone winch plate as the central backbone for the bumper
• Includes D-shackle mounts
• Direct bolt-on replacement for 2007-2020 Wrangler JK, Wrangler JL and Gladiator JT models
• Includes all the necessary hardware for a worry-free installation
• California Residents: WARNING

RT Off-Road Front Bumpers

From $386.99

• RT Off-Road front bumper for Jeeps
• RT Off-Road offers XJ,MJ,ZJ and Wrangler front bumpers
• Factory style replacements
• California Residents: WARNING

Westin XTS Series Front Bumpers and Accessories

From $799.99

• 21-Current Ford Bronco (With sensor)
• High strength, lightweight design
• Low profile winch mount improves air flow
• Integrated lightweight 10-gauge steel shell & 4-gauge steel winch tray provides superior strength at an affordable price
• Features 4.5" x 10" winch mount pattern
• Accommodates most winches up to 12,000 lbs capacity
• Provides two recovery points for shackles
• Compatible with all factory sensors
• Optional skid plate (sold separately)
• Optional round bull bar or angular bull bars (sold separately)
• Hardware and mounting brackets included
• E-coated base coat provides long lasting corrosion protection
• Available in textured black finish
• California Residents: WARNING

Westin WJ2 Series Front Bumpers

From $793.99

• Available in full width or stubby
• Textured black finish
• 3/16-inch plate steel construction
• 2 side and 2 front off-road jack points
• 2 corner post mount points
• Rock Light mount points on lower bumper corners
• Hooks include shackle mount point for easy attachment
• Optional skid plate sold separately
• No drilling required – bolt on installation
• California Residents: WARNING

Fishbone Offroad Front Bumpers

From $529.99

• Bolt on installation
• Made from 3/16" steel
• Black powder coat finish
• Includes D-rings
• Made to accept a winch
• California Residents: WARNING

Fab Fours Matrix Front Bumpers

From $1,679.99

• Aggressive design
• Center mount accommodates a 30 inch light bar (not included)
• Customizable - Removable inserts for different color options
• Side mounting slots and tabs for various light options (lights not included)

Fab Fours Open Fender Front Bumpers

From $2,569.99

• Designed to work specifically with the Fab Fours Open Fender System (TF3000-1)
• Overall design and fit is "High and Tight" to the contours of the vehicle
• Lightweight: No Guard 65 lbs. / Pre-Runner Guard 75 lbs
• Center Mount allows for a Rigid Industries 20” LED light bar (light bar not included)
• Mounting options on each side for (2) 3" X 3" Cubed lights to give you maximum LED light coverage (Lights not included)
• Lower cutout to provide maximum airflow
• Complete bolt-on front bumper with provided brackets that tie directly to the frame
• 2 Stage Black Powder Coat
• 11 ga. U.S. Steel Construction
• 100% Made in the USA
• California Residents: WARNING