ARB Summit Winch Front Bumper - 3480010

Specifications

  • ARB 4x4 Accessories | Part Number: ARB3480010
  • Winch Mount Compatible:Yes
  • Width:Full
  • Light Mounts Included:Light Mounts Included
  • Finish:Powder Coat
  • Material:Steel
  • Includes Hoop:Yes
  • Includes Stinger:No
  • Includes Receiver Hitch:No
  • D-Ring Mount Included:D-ring Mount Included
  • Fitment:Direct Fit

PRODUCT OVERVIEW

The ARB Summit Bumper is designed as a full bumper replacement with 4WD use in mind. Compatible with winches up to 10,000lb, it provides needed off-road protection, twin jack points, rated recovery points, while accommodating adaptive cruise control and parking sensors. The width of the Summit Bumper blends seamlessly into the vehicle design, complementing either wide or narrow fender flares.

The following winches fit the 3480010 ARB Summit Winch Bumper: Warn ZEON 8, 8-S, 10, 10-S, ZEON Platinum 10, 10-S, VR EVO 8, 8-S, 10 and 10-S. Smittybilt Gen2 X20 10K. Warn M8000, XD9000, 9.5XP, 9.5XDC fitment has not been confirmed. Control boxes may need to be relocated. The winch body fits but control box may not fit under top pan press form.

Customer Reviews

4.0
4.0 4.0
1 Customer ratings
4.0 Very robust bumper

I'm very happy with my purchase and the bumper looks better than shown in the manufacturer's picture (without those large lights). Where I live an impact with wildlife is likely and I have no desire to indefinitely wait for spare body parts for my Bronco. The design and strength will definitely provide the protection I was looking for. I did not mount a winch at this time, and it will impact approach angle geometry. I would have given this bumper 5-star rating were it not for: 1. The lackluster instructions; 2. The fact that all nuts, bolts, and washers come in one single bag; 3. No blanks are provided for the large fog light openings so be prepared for the additional cost of lights; 4. The manufacturer does not provide additional extension wiring for the forward-facing camara and proposes a time-consuming alternative instead. I suggest you order a plug and play extension (this was my biggest issue with this bumper); 5. The camara is mounted slightly (~1") off center and in my opinion not forward enough since I can still see the license plate mount; 6. There are sharp edges so be prepared to protect your wiring.


from Colorado |
 

Recommended

Similar

Question & Answers

7 Answered questions

Q: Will the OEM Badlands/Black Diamond skid plates/body pan work with this bumper? Answer this question

A: Works w/ OE Ford under panel

Answered by Dave from 4WP HQ on 03/21/2022

Q: Is this bumper compatible with the Lux package on a Bronco Badlands Sasquatch? Answer this question

A: Yes, the fitment guide shows it fitting,

Answered by Dave from 4WP HQ on 02/01/2022

Q: Does this fit if you're using the a r b belly pans Answer this question

A: Yes this will work with ARB's UVP belly pans.

Answered by Dave from 4WP HQ on 02/01/2022

Q: What winches do you sell work with this bumper and does this already have the mounting plates for it. Answer this question

A: The following winches fit the ARB3480010 ARB Summit Winch Bumper: Warn ZEON 8, 8-S, 10, 10-S, ZEON Platinum 10, 10-S, VR EVO 8, 8-S, 10 and 10-S. Smittybilt Gen2 X20 10K. Warn M8000, XD9000, 9.5XP, 9.5XDC fitment has not been confirmed. Control boxes may need to be relocated. The winch body fits but control box may not fit under top pan press form.

Answered by Dave from 4WP HQ on 12/08/2021

Q: Is there a location to mount the adaptive cruise control sensor on the bumper? Answer this question

Manufacturer

ARB has been manufacturing 4x4 parts for over 40 years. ARB Air Lockers will amplify the traction of your 4x4 on challenging trails. They give the off-road driver what you need in traction, control and performance. ARB believes in its products so it offers a five year, unlimited mile warranty across the air locker range. ARB 4x4 Accessories includes the suspension system brand Old Man Emu, maker of premium off-road shock absorbers. Old Man Emu premium shocks are developed and tuned specifically for each vehicle application. They come complete with vehicle specific mounting kits for fuss free installation. ARB parts are all developed, engineered and fabricated in-house in Australia. Shop ARB 4x4 Accessories Now

This Product Fits the Following:

  • 2022 Ford Bronco Badlands  
  • 2022 Ford Bronco Base  
  • 2022 Ford Bronco Big Bend  
  • 2022 Ford Bronco Black Diamond  
  • 2022 Ford Bronco Outer Banks  
  • 2022 Ford Bronco Wildtrak  
  • 2021 Ford Bronco Base  
  • 2021 Ford Bronco Big Bend  
  • 2021 Ford Bronco Black Diamond  
  • 2021 Ford Bronco Outer Banks  
  • 2021 Ford Bronco Badlands  
  • 2021 Ford Bronco Wildtrak  
  • 2021 Ford Bronco First Edition  

Promotions

Lowest Price! Guaranteed!