ARB Deluxe Bar (Black) - 3423020

Specifications

  • ARB 4x4 Accessories | Part Number: ARB3423020
  • Width:Full
  • Light Mounts Included:Light Mounts Included
  • Winch Mount Included:Winch Mount Included
  • Finish:Powder Coat
  • Material:Steel
  • D-Ring Mount Included:D-ring Mount Included
  • Position:Front
  • Fitment:Direct Fit

PRODUCT OVERVIEW

Unlike most brush guards and bumpers, ARB Bull Bars incorporate a fully engineered mounting system which completely replaces the factory bumper. ARBs Deluxe Bull Bar selection is the most extensive. Loaded with features aimed at making remote area travel safe, no other bumper offers the same degree of vehicle integration, protection or functionality.

Related

Reviews

4.5
4.0
weight

FYI- This bumper is only 8 pounds heavier than a full Aluminum bumper


from Lomita |
5.0
Who needs instructions

Picked it up and the box was as big as my truck. Got it home opened the box found small box with parts and my new bumper.should of took it out of box at store. Watched you tube and read instructions got the bumper painted the way I wanted felt a little nervous. Everyone on line was cutting and welding to get old bumpers off and to fit new bumper on. I don't weld and had to barrow angle grinder from a friend. My 13 year old son and I sat down in the morning and started Un bolting old bumper lots of hidden bolts took us about 2 hours. We went for lunch. Came back to truck and paired up bits and pieces and started installing realizing the instructions are harder to understand than just putting it together. 30 minuts laiter we were making our final fitting adjustment and hooking up the lights. I only had to redrill skid plat hole to line up. No cutting no welding easy


from Denver co |
4.0
ABR Deluxe Bull Bar Winch Mount Bumper

Bumper is very well built and gives an aggressive look to your vehicle. Doesn't pre-load factory suspension due to weight. Instulation on a 1999 Toyota 4runner limited. The factory bumper mount has a plate where it bolts to frame. This plate is welded and these welds have to be grinded off and a hole has to be drilled through the bottom of the frame to bolt brackets of new bumper. Installation is not difficult if you have some experience with a grinder and drill. The instructions are difficult to understand but videos online assist with install. Overall I would recommend this bumper to anyone who goes off roading often does not plan on ever putting a factory bumper back on. The delivery company used to deliver product sucked


from Havelock, NC |
5.0
Well-Built Bumper!

I've dreamed of owning an ARB Bumper since I was a kid. Now that I own one, the company has not let me down! Great bumper! Very light for being a plate bumper!


from Little Rock, AR |
4.0
Poor Installation Instructions

On my daily driver, good protection while checking out the ranch. Good protection against wildlife strikes...Wild Hogs!


from Bryan, Texas |
3.0
Dissappionted, bumper was bent

Package arrived undamaged packaged well, however when I went to fit on vehicle discovered bumper had been bent, didn't appear to be from transit since packing was not damaged. Also rubber bumper pads separated from mounting bolts. I think ARB might have a QC issue. Wound up repairing bumper and discarding pads. I purchased prefab since I didn't have time to build myself. I will custom build next time. I have been promised a store coupon for my inconvenience that might cover the paint, haven't received it yet. I would still recommend this product just get it at the store and check it for damage before you take it.


from Louisiana |
5.0
1996 Tacoma Bull Bar

Installation was pretty straightforward and no problems with fittament. Nice finish. Though the instructions were not too acurate but I guess this bar is meant to fit multiple years. It was missing some hardware even though package was sealed. I'm not running a winch now so there was enough hardware to install the bar.


from Honolulu, HI |
5.0
Easy Installation, Looks Great!!

This is a 2 person job. Getting it aligned is much easier that way. The instructions were amazingly clear, but you have to read them carefully before you start. Some steps aren't addressed as closely as I wish they were. I installed the bracket that holds the skid plate backwards. Thus no skidplate - or I have to drill it. However, it only covers the winch area so I've been fine without it. The Warn M8000 winch fit like it was made for it. That is why I got the bumper in the first place. My 2004 Tacoma TRD is 2wd & I wanted the security of a winch for muddy trails. There are places to mount lights high & low. I put a pair of Dually's in the low holes and they are brighter than my stock lights (but that is another review). This ARB bumper is nice looking and solid. The winch mount has holes in all the right places. An added plus is I can grab the bumper to help my old bones get up if I've been under the truck for any reason. I would highly recommend this bumper for anyone wanting to hang a winch and/or lights while making your Tacoma look a bit tougher.


from Dallas, TX |
4.0
bumper, no brackets [@]

Like the bumper but when I got back from deployment, I found everything but the mounting brackets. Any input for that? invoice # [@]Cheers


from trout creek, mt |
5.0
looks great

way better protection then stock bumper


from Calgary AB. canada |

Question & Answers

16 Answered questions

I have a 1995.5 Tacoma and I was wondering if I will have to modify the nose of the frame (cut) to mount this replacement? thanks!

Asked by don from Stephenville TX on

Thanks for the inquiry don, the ARB 4x4 Accessories Black Toyota Tacoma Deluxe Bull Bar Winch Mount Bumper part # ARB3423020 does NOT require cutting on a Tacoma but if mounting to a 4runner, that would require cutting.

Answered by from Stephenville TX on

Is there a special kit to fit this bumper when u have a 3 inch body lift on the truck ?

Asked by Pipeman from Warrenton nc on

The body lift should have already came with this bracket to do this. They do not come with the ARB bumper.

Answered by Morgan from Warrenton nc on

How much does this bumper weigh?

Asked by gary from chula vista, ca on

Thanks for the inquiey gary, the ARB 4x4 Accessories Black Toyota Tacoma Deluxe Bull Bar Winch Mount Bumper part # ARB3423020 weighs 150 pounds.

Answered by from chula vista, ca on

See all questions & answers

Manufacturer

ARB has been manufacturing 4x4 parts for over 40 years. ARB Air Lockers will amplify the traction of your 4x4 on challenging trails. They give the off-road driver what she needs in traction, control and performance. ARB believes in its products so it offers a five year, unlimited mile warranty across the air locker range. ARB 4x4 Accessories includes the suspension system brand Old Man Emu, maker of premium off-road shock absorbers. Old Man Emu premium shocks are developed and tuned specifically for each vehicle application. They come complete with vehicle specific mounting kits for fuss free installation. ARB parts are all developed, engineered and fabricated in-house in Australia. Shop ARB 4x4 Accessories Now

This Product Fits the Following:

  • 2004 Toyota Tacoma Base  
  • 2003 Toyota Tacoma Base  
  • 2002 Toyota Tacoma Base  
  • 2001 Toyota Tacoma Base  
  • 2000 Toyota Tacoma Limited  
  • 2000 Toyota Tacoma SR5  
  • 2000 Toyota Tacoma Base  
  • 1999 Toyota Tacoma Limited  
  • 1999 Toyota Tacoma SR5  
  • 1999 Toyota Tacoma Base  
  • 1998 Toyota Tacoma Limited  
  • 1998 Toyota Tacoma SR5  
  • 1998 Toyota Tacoma Base  
  • 1997 Toyota Tacoma SR5  
  • 1997 Toyota Tacoma Base  
  • 1996 Toyota Tacoma SR5  
  • 1996 Toyota Tacoma Base  
  • 1995 Toyota Tacoma SR5  
  • 1995 Toyota Tacoma Base  

Promotions