Fab Fours Premium Front Bumpers

From $1,569.99

• Provides more tire clearance
• Winch ready (Accepts up to 16,500 lb. winches or smaller)
• 3/4 inch D-ring Mounts
• 1/4 inch Boxed mounting system with adjustability to allow a custom fit
• Fab Fours signature injection molded light housings
• Fab Fours 90mm fog and 60mm turn indicator lights included FREE with the bumper
• 2 Stage matte black powder coat or bare steel (-B instead of -1)
• Combination of 1/4 inch and 3/16 inch steel construction
• 100% Made in the USA
• California Residents: WARNING

Fab Fours Vengeance Front Bumpers

From $109.99

• Available in 2 Stage Black Powder Coat or Bare Steel
• Overall design and fit is inchHigh and Tight inch to the contours of the vehicle
• The Vengeance Series front bumper is sensor compatible
• Allows for an integrated 20 inch LED light bar in the center (light bar not included)
• Mounting options on each side for (2) 2x2 Dually lights to give you maximum LED light coverage
• Lower cutout to provide airflow to intercoolers
• Complete bolt-on front bumper w/ provided brackets that tie directly to the frame
• Sensors optimized for vehicles with suspension lifts - stock height trucks may require tuning the sensor mount and will require special care
• Available in a no guard or pre-runner guard option.
• California Residents: WARNING

Fab Fours Premium Rear Bumpers

From $1,029.99

• Bare steel or Black Powder coat
• 3/16 inch steel construction
• Fab Four's signature knife edge and recessed D-Ring mounts
• CB antenna mount
• Compatible with factory receiver hitch
• Tire carrier sold separately
• California Residents: WARNING

Fab Fours Black Steel Front Ranch Bumpers

From $1,609.99

• Combination Pipe and Tread Plate Construction
• Gloss Black Powder Coat or Bare Steel (-B instead of -1)
• Back up lights included
• Pre-drilled sensor holes
• Retains OEM receiver hitch and wiring locations
• 100% Made in the USA
• California Residents: WARNING

Fab Fours Vengeance Rear Bumpers

From $1,049.99

• Available in Bare Steel and Fab Fours 2 Stage Black Powder Coat
• Two front-side openings allow light options
• (4) 2x2 Dually lights or (2) 6 inch light bars (lights are not included)
• 11gauge US Steel Construction
• Sensor compatible
• Retain OEM Receiver Hitch and Wiring Location
• 11gauge US Stee
• Weight: 65 lbs.
• U.S. Steel Construction
• 100% Made in the USA
• California Residents: WARNING

Body Armor 4x4 Front Bumpers

From $1,183.19

• Front winch bumper
• Textured Black powder coat finish
• 4.5 inch Light pockets
• 3/16 inch thick steel plate construction
• California Residents: WARNING

Fab Fours Elite Front Bumpers

From $1,849.99

• Full Replacement Bumper
• Bolt-on Tow Hooks Included
• OE Style ELITE Badge Included
• Light mounts for factory fog lights
• Optional Bolt-On Winch mount For Up 16,500 LB Winches
• Optional Bolt-On 1 inch D-ring Mount
• Made in the USA
• California Residents: WARNING

Body Armor 4x4 Rear Bumpers

From $118.99

• Textured black powder coat
• Plate steel construction
• With swing arm post only, does not include tire carrier
• California Residents: WARNING

Fab Fours Rear Ranch Bumpers

From $1,049.99

• Combination Pipe and Tread Plate Construction
• Gloss Black Powder Coat or Bare Steel (-B instead of -1)
• Back up lights included
• Pre-drilled sensor holes
• Retains OEM receiver hitch and wiring locations
• 100% Made in the USA
• California Residents: WARNING

Fab Fours Aero Series Front Bumpers

From $109.99

• Fab Fours' newest Ultra Light Hybrid bumpers: AERO SERIES
• By combining tube and plate steel these premium bumpers are constructed to be lightweight (weighing only 45bs), offer a sleek AEROdynamic design while providing optimal tire clearance
• Engineered to retain factory skid plate and new technology features including Adaptive Cruise Control and Park Assist
• Center Cutout for Rigid Industries 20? LED light bar
• The fit of this bumper is high and tight and perfectly follows the vehicles body lines
• Available in a no guard or pre-runner guard option
• California Residents: WARNING

Body Armor 4x4 Tire Carriers

From $366.34

• This Body Armor 4x4 Jeep tire carrier utilizes a dual wheel bearing design for additional strength. Uses a latch system that operates like a car door to open the Jeep spare tire carrierBlack powder coat
• 42MM axle stub design
• Dual wheel bearing design
• California Residents: WARNING

Fab Fours Elite Rear Bumpers

From $1,039.99

• Combination Pipe and Smooth Plate Construction
• Matte Black Powder Coat or Bare Steel (-B instead of -1)
• Pre-drilled sensor holes
• Retains OEM receiver hitch and wiring locations
• 100% Made in the USA
• California Residents: WARNING

Fab Fours Black Steel Front Bumpers

From $149.99

• Combination Pipe and Tread Plate Construction
• Gloss Black Powder Coat or Bare Steel (-B instead of -1)
• Bolt-on tow hooks NOW included
• Light Mounts for Factory Fog Lights
• Optional Bolt-on Winch Mount (Accepts up to 12,000 lb. winches or smaller)
• Optional Bolt-on 1 inch D-ring mounts
• 100% Made in the USA
• California Residents: WARNING

Fab Fours Lifestyle Winch Bumpers

From $2,069.99

• Provides more tire clearance
• Winch ready (Accepts up to 10,000 lb. winches or smaller)
• 3/4 inch D-ring mounts
• 1/4 inch Boxed mounting system with adjustability to allow a custom fit
• Fab Fours' signature injection molded light housings
• Fab Fours' 90mm fog and 60mm turn indicator lights included FREE with the bumper!
• 2 Stage matte black powder coat or bare steel (-B instead of -1)
• 3/16 inch Steel construction
• 100% Made in the USA
• California Residents: WARNING

Fab Fours Elite Ranch Front Bumpers

From $1,919.99

• Combination Pipe and Smooth Plate Construction
• Matte Black Powder Coat or Bare Steel (-B instead of -1)
• Bolt-on tow hooks NOW included
• Light Mounts for Factory Fog Lights
• OE Styles ELITE Badge Included
• Optional Bolt-on Winch Mount (Accepts up to 16,500 lb. winches or smaller)
• Optional Bolt-on 1 inch D-ring mounts
• Optional Bolt-on 2 inch Receiver
• 100% Made in the USA
• California Residents: WARNING

Fab Fours Elite Hi-Flow Lower Guards

From $149.99

• Available in Bare steel or Powder coat
• Elite Hi-Flow Lower Guard
• For 3/4 And 1 Ton Trucks
• California Residents: WARNING

Fab Fours Replacement Rear Bumpers

From $1,049.99

• 3/16 inch Steel Construction
• D-Rings are cut with 3/4 inch steel and will accept up to a 7/8 inch Shackle
• Retain OEM Receiver Hitch and Wiring Location
• Fab Fours 2 Stage Black Powder Coat
• Weight: 115 lbs.
• U.S. Steel Construction
• 100% Made in the USA
• California Residents: WARNING

Body Armor 4x4 Pro Series Front Bumpers

From $931.59

• Textured black powder coat
• 3/16 inch steel plate construction
• Massive recovery points tied to frame
• Aggressive approach angle
• Integrated front skid plate
• Optional bumper wings for a wider profile
• California Residents: WARNING

Body Armor 4x4 Tubular Front Bumpers

From $731.84

• Black powder coat
• 2 inch .120 wall tubing
• Light mount
• D-ring mount
• California Residents: WARNING

Fab Fours Matrix Front Bumpers

From $1,609.99

• Aggressive design
• Center mount accommodates a 30 inch light bar (not included)
• Customizable - Removable inserts for different color options
• Side mounting slots and tabs for various light options (lights not included)

Fab Fours Black Steel Elite Front Bumpers

From $1,609.99

Body Armor 4x4 Front Bumper Wings

From $276.99

• 2 and 4-door models
• 3/16 inch steel plate construction
• Round pockets for OEM or 3 inch round lights
• Sold as a pair
• California Residents: WARNING

Fab Fours Elite Lite Guard

From $199.99

• Available in Bare steel or Powder coat
• Elite Hi-Flow Lower Guard
• For 3/4 And 1 Ton Trucks
• California Residents: WARNING