Body Armor 4x4 Front Bumpers

A: Yes. I have this bumper on my 2020 1500 LT Z71 w/ LM2. You will need to the associated intercooler shroud (GM-5966) to mount the intercooler active shutters and protect the intercooler from road trash. For the money I think the is a very good option.

A: INTERCOOLER SHROUD REQUIRED FOR DIESEL ENGINE PN: GM-5966 (OPTIONAL FOR GAS ENGINE)

A: This does not affect the adaptive cruise control. The cruise control sensors are windshield near the rear view mirror.

A: Yes works fine

A:  No By the way, the bumper I got from 4wheelparts was damaged and returned  The new one from Amazon was fine and did not cause excess weight on front end

A: You should be fine, it is less than 100#.

A: If you do not put a light in the bummer you can reach in and turn the clutch on and off and also plug in your controller. I put a smutty built winch in mine.

A: Check out the Smittybilt XRC 9.5K Waterproof 9500lb Winch Gen2 - 97495.

A: Bumper should not interfere with anything stock on the vehicle. I installed three month ago , 18 trd or, no issues :)

A: Hello Dharian479, It appears the bumper will work fine with the Tacoma's TSS (which I believe is a mix of the safety features, keep in mind though bull bar part of bumper sticks out more than stock). I reached out to Body Armor 4x4 and got this response "The TC-19339 is compatible with the Toyota safety sense." Thanks for checking us out,

A: mine is a 2015 trd sport

A: No - this is the only photos we have.

A: Less than 40 pounds 

A: I got mine about 4 months ago. It’s probably about 120 pounds, and I learned that it is certainly enough that if you have slightly larger than stock tires and no lift they will likely rub. Nothing slipping the wheel well forward a few inches cant fix, but something to know. 

A: Yes to both questions 

A: It does come powder coated. I haven’t put a winch in yet so I’m not sure on that.

A: For my 2017 JK, the OEM fog lights fit. The mounting nuts and bolts were included in the hardware that came with the bumper.

A: TW- Thanks for asking. Body Armor 4x4 does not specify a light to be used in the JK Wrangler Stubby Front Winch Bumper with Grill Guard in Textured Black Powdercoat

A: This bumper has TWO WELDED D-RING MOUNTS - 3/4″ D-RING

A: This bumper * ONLY FITS RUBICON MODEL, Flat tow - USE: Smittybilt Jeep Tow Bar - S/B87450

A: The Body Armor Formed Front Bumper with Grille Guard and Winch Mount (Black) - TJ-19531 has a standard winch bolt pattern and will accommodate a Smittybilt or Warn winch. It is recommended you install the winch on the bumper before installing bumper to vehicle.

A: The opening is not listed, however this will fit: Pro Comp Motorsports Series 20" Double Row LED Combo Spot/ Flood Light Bar -PN: EXP75220

A: You would have to relocate it wherever you have room. We have some mounts that go on the winch fairlead or even the d-ring mounts. https://www.4wheelparts.com/b/exterior-parts/body-kits-accessories/license-plate-bracket/_/N-cm1vd

A: To anyone else curious ill answer my own question yes it does fit with minimal overhang about .5 inch on each side.

A: I never put it on a scale, but I would guess around 120. It is a heavy steel. Fitment of a winch or lights is required prior to installation.

A: Yes you can

A: These part numbers will work: 20”= 40020 20″ Led Light Bar Combo Beam Cube lights= 30040 (spot) 30041 (flood)

A: No it does not. This bumper fits 2016+ Tacomas.

A: This bumper is OE sensor compatible. https://www.bodyarmor4x4.com/product/2014-2019-toyota-tundra-eco-series-front-bumper-winch/

A: Yes, this bumper supports the front parking sensors and factory winch.

A: Yes it will fit.

A: Answering my own question here. The OAM fog lights for my 2017 JK fit perfectly. THe mounting nuts and bolts were even included in the hardware.

A: It has an integrated winch plate. Nothing else is needed but the winch.

A: Yes, this would do the job.

A: The Body Armor HiLine Series Front Bumper - TC-19339 weighs 80 lbs.

A: Yes. The manufacture Body Armor 4x4 lists it to 2020, but Tacoma's did not change for 2021 so it will fit. Body Armor hasn't updated their fitment data yet.

A: Yes you can.

A: No - this bumper comes with it's own grille guard.

A: Yes depending on what style light you have.

A: Hello Joey, Yes, the Body Armor 4x4 JK Wrangler Stubby Front Winch Bumper with Grill Guard in Textured Black Powdercoat B/AJK-19532 will fit your vehicle application. Thank you for the question.

A: Thanks for the inquiry Codee, the Body Armor 4x4 Jeep Wrangler Formed Front Bumper with Grill Guard and Winch Mount part # B/ATJ-19531 this will come with all mounting hardware.

A: Thanks for the inquiry joey, the Body Armor 4x4 JK Wrangler Stubby Front Winch Bumper with Grill Guard in Textured Black Powdercoat part # B/AJK-19532 D rings are sold separately.

A: Hello Jake, We suggest the XRC-9.5K Winch Synthetic Rope Gen2, With Aluminum Fairlead S/B98495 for this bumper. Thank you.

A: Hello Ray, Shipping weight is 196lbs. You can run a 8,000lb to 9,500lb winch and you can run the factory fog lights. Please note: You can save on shipping costs by picking this bumper up directly from our Compton, CA distribution center. Thank you.

A: Hello Eric, the Body Armor 4x4 JK Wrangler Stubby Front Winch Bumper with Grill Guard in Textured Black Powdercoat part# B/AJK-19532 will retain the factory vacuum pump location. Thank you for your question.

A: Hello Jim, the Body Armor 4x4 Front Winch Bumper part# B/AFJ-19336 weighs in at 120lbs. This is a bolt on bumper and it will also allow you to keep your factory skid plate. Thank you for your inquiry.

A: The RPP7659 will not fit this bumper it is only for the stock bumper. The body armor bumper already has a bull bar and yes it will fit with the winch.

A: Yes this will fir your jk wrangler I don't know why the website is saying that. Sorry

A: Hello Bill, the Body Armor 4x4 Toyota Tundra Front Winch Bumper in Textured Powder Coat part# b/atn-19335 can be shipped truck freight for 99$. Thank you for your inquiry.

A: Matt, Everything is included with the Body Armor 4x4 Toyota Tacoma Front Winch Bumper with Grill Guard in Textured Powder Coat. No other parts need to be purchased. Hope this helps!

A: Hello there, the Body Armor 4x4 JK Wrangler Stubby Front Winch Bumper with Grill Guard in Textured Black Powdercoat will fit your 2013 Jeep Jk. It will fit 2007 to 2014 JK Wrangler, Rubicon and Unlimited;2 and 4-door models. Shop with us anytime, on your schedule. Browse 4WheelParts.com, call our customer service center, or come visit us in one of our stores. You can even save on shipping costs by shopping online and picking your order up in a store. No matter which method you prefer, we’re ready to help with excellent parts, advice, and service.

A: Hello there, the Body Armor 4x4 Toyota Tacoma Front Winch Bumper with Grill Guard in Textured Powder Coat part number B/ATC-19335 will work with your truck. Now as far as the weight the product is 150LB. So I'm not sure whether or not if this bumper would slow down or weigh the truck. Please into consideration how long the kit has been installed & whether the springs are weaken. Shop with us anytime, on your schedule. Browse 4WheelParts.com, call our customer service center, or come visit us in one of our stores. You can even save on shipping costs by shopping online and picking your order up in a store. No matter which method you prefer, we’re ready to help with excellent parts, advice, and service.

A: Thanks for the inquiry Chuck, the Body Armor 4x4 Toyota Tacoma Front Winch Bumper with Grill Guard in Textured Powder Coat part # R/ATC-19335 will not fit a 2014 you'll need part # R/ATC19336.

A: Hello willyswheeler and thank you for your question! Body Armor 4x4 JK Wrangler Stubby Front Winch Bumper with Grill Guard in Textured Black Powdercoat has the grille guard leaning out like a pre runner bar.

A: Hello Matbraz. The Body Armor 4x4 JK Wrangler Stubby Front Winch Bumper with Grill Guard in Textured Black Powdercoat, part # B/AJK-19532 does not come with either sets of the lights. Thank you

A: Thanks for the inquiry Ric, the Body Armor 4x4 Toyota Tacoma Front Winch Bumper with Grill Guard in Textured Powder Coat part # b/atc-19335 works on a 2005-2014 Tacoma, if you lifted the truck with a suspension lift it will work fine.

A: Thanks for the inquiry chip, the Body Armor 4x4 Toyota Tacoma Front Winch Bumper with Grill Guard in Textured Powder Coat part # B/ATC-19335 according to the manufacturer the grill guard is textured black and comes with the bumper and is bolt on if you would like to mount it. As far as the hole for the winch we offer fairleads and fairlead covers just not a cover for the hole.

A: Thanks for the inquiry Chip, the Body Armor 4x4 Toyota Tacoma Front Winch Bumper with Grill Guard in Textured Powder Coat part # B/ATC-19335 does fit a 2012 Tacoma Pre-Runner and will be able to use the factory fog lights.

A: Thanks you for the question. If you take a look at the individual picture of the fog light on the website you can see where the bolt comes through the bottom of the bumper on the light mount. You would use the mounts provided with the lights you are using. Thank you BJ Answer Box Sales 310-900-5500 x 5125

A: Hello Hollo, the Body Armor 4x4 Toyota Tacoma Front Winch Bumper with Grill Guard in Textured Powder Coat could possibly work with lots of cutting and welding. WE do carry a really nice Winch ready bumper by arb part# arb3423020. This would be a direct bolt on. Thank you for your inquiry.

A: Hi JeepGuy The Body Armor bumper has a 70 pound shipping weight. Thank You

A: Brian- Thanks for the question. The Body Armor 4x4 JK Wrangler Stubby Front Winch Bumper with Grill Guard in Textured Black Powdercoat does not reuse the factory fog lights.

A: Hello Wahoo, Thank you for the question. The factory bumper must be removed to install the Body Armor 4x4 Toyota Tacoma Front Winch Bumper with Grill Guard in Textured Powder Coat Part Number: B/ATC-19335

A: Hello Bo, Thank you for the question. Yes, this bumper will accommodate a 10,000lb winch.

A: Thanks for asking. According to Body Armor the factory fogs for 2005-2011 should fit the Toyota Tacoma Front Winch Bumper with Grill Guard. As for an 8000 Lb winch to go with this bumper I would recommend the new Gen 2 Smittybilt XRC-9.5K winch that you can find here http://jo.my/a4dbml

A: Mike- Thanks for asking. According to Body Armor the factory fogs for 2005-2011 should fit this bumper. If you have the B/ATC-19336 2012-2013 Tacoma bumper it takes a universal 4-4.5" fog light.

A: J- Thanks for asking. you may want to consider getting him a set of front strut spacers like the Pro Comp ones here http://jo.my/ye56qx in order to help keep the truck level when installing the Body Armor 4x4 Toyota Tacoma Front Winch Bumper with Grill Guard in Textured Powder Coat

A: Thank you for your question. The Body Armor 4x4 Toyota Tacoma Front Winch Bumper with Grill Guard in Textured Powder Coat part number weighs in at 200 pounds

A: Thank you for your question. No Body Armor does not make a Body Armor 4x4 Front Winch Bumper with Grill Guard in Textured Powder Coat for your 2006 nissan frontier 4x4

A: Gimps- Thanks for the question. Body Armor 4x4 does not specify this Toyota Tacoma Front Winch Bumper with Grill Guard in Textured Powder Coat to be airbag compatible. The only front bumper for the Tacoma that actually states airbag compatible is the ARB Bull Bar you can find here http://jo.my/vhqblj

A: Degarry- Thanks for the inquiry. Looking at the pictures it appears that the Toyota Tacoma pictured is running a 37 inch tire.

A: Wayne- Thanks for the question. The Body Armor 4x4 Front winch bumper weighs in at 185lbs.

A: The Body Armor 4x4 Front Winch Bumper does not include the winch.