Endless Summer Savings Are Here! | SHOP NOW
Welcome Guest
SHOP TRUCK, JEEP & UTV PARTS
SHOP BY BRANDS
FREE SHIPPING on Orders Over $75*
Fab Fours Premium Front Bumpers
Fab Fours
Features
Reviews
Q & A
See all questions & answers
Manufacturer
Features
- Provides more tire clearance
- Winch ready (Accepts up to 16,500 lb. winches or smaller)
- 3/4 inch D-ring Mounts
- 1/4 inch Boxed mounting system with adjustability to allow a custom fit
- Fab Fours signature injection molded light housings
- Fab Fours 90mm fog and 60mm turn indicator lights included FREE with the bumper
- 2 Stage matte black powder coat or bare steel (-B instead of -1)
- Combination of 1/4 inch and 3/16 inch steel construction
- 100% Made in the USA
- California Residents: WARNING
PRODUCT OVERVIEW
Building on their reputation for the highest quality and design in the truck market, the Fab Fours Premium winch bumpers now have a redesigned center section and 4 integrated sensor holes to work with factory equipped sensors. Both front and rear matching steel bumpers will work with the factory park assist system. These sensor bumpers are a part of the premium bumper line. The sensor holes have been laser cut with the same factory pattern and are compatible with the OEM sensor housing. The new internal winch tray has been upgraded with a new d-ring and fairlead location. Access slots have also been cut into the lower portion of the tray for the factory sensor harness to pass through.
Customer Reviews
Customer Images
4.5
4.5 112
216 Customer ratings
Customer Images
2.0
Don’t use your winch
I love the looks of this bumper but since the winch mounts inside the bumper and the bumper is adjustable, there is no way to tighten enough not to move when winching resulting in the bumper being pulled out of adjustment and a very tedious task to remove the fog lights to access the adjustment bolts. A better design that I’ve actually only seen in Australia is to have the winch mount to a separate plate attached to the frame then the winch line pulled through the bumper so the force is applied to a non adjustable mount directly to the frame. I’ve used the winch 6 times and 6 times I have to disassemble and reassemble to adjust my bumper. I would not recommend for winch use.
By Steve H
from San Antonio, Texas
| 6/10/20
5.0
Worth the money
I have had this bumper on my 2015 Tacoma for 3 years. Still looks good and takes a beating. Very intimidating to other drivers. I really recommend you have it professionally installed. The weight with a winch is about 300lbs. Beef up your front coils as well. It will take a hit from a big ol buck and just shake it off.
By Mike
from Sacramento,CA
| 3/8/19
5.0
Phenomenal front bumper!
I wanted a quality front bumper, so after researching for months, I came to the conclusion that fab 4 was the best to go, however, not the most economical though. I ordered it online through this website to be delivered to the San diego store. It took about 3 1/2 weeks for it to arrive at the store. Plus there was an additional fee for the over weight. The staff are very knowledgeable and friendly so no complains with customer service, however, it did take them the whole day for them to install the bumper. But in the end it was worth it and have professionals install it. 5 stars!
By Sancho
from San Diego
| 12/15/15
5.0
one awesome fitting bumper
peters in longview tx built this truck for me , this bumper made it look awesome love the fit
By dave
from fort worth texas
| 3/20/15
5.0
Awesome bumper!
Fab fours is the way to go !
By Aj
from Farmington nm
| 4/30/12
Question & Answers
21 Answered questionsdoes this require a fitment kit or special skid plate? some aftermarket bumpers require an aftermarket skid plate instead of the stock one.
Asked by the grizzle from red deer, alberta on
Hello Grizzle, No special skid plates are required with this bumper. This bumper will allow you to retain the factory skid plates. Thank you for the question.
Answered by from red deer, alberta on
what warn winch (10,000 or 12,000 lb)will fit in bumper...can i get it installed before shipping????
Asked by wayne from milford, ny on
Hello Wayne, I suggest the WARN VR12000 Winch Part Number: WAR86260 for this bumper. Thank you for the question.
Answered by from milford, ny on
What size is the bumper top tubing?
Asked by Ian the intermediate from on
They are 2"-2.5" depending on application.
Answered by Morgan from on
Manufacturer
Fab Fours is the industry leader in aftermarket bumpers for off-road vehicles. The company was founded in 2005 by two friends who were off-road enthusiasts. The Fab Fours name stands for strength, durability and superior design in off-road accessories. Fab Fours products are all made in the U.S.A. using skilled steel workers, not robots. The company designs plate steel replacement winch bumpers for Nissan, Toyota, Jeep, Ford Dodge , GMC and Chevrolet. All Fab Fours winch bumpers come with fog lights and turn signals, D-ring Mounts and winch mounts and 2 stage flat black powdercoat as standard bumper features. Each bumper comes with a lifetime warranty on the structure of the product. The warranty is valid only for the original purchaser of the product. Shop Fab Fours Now
