Synergy Manufacturing Ball Joints

From $250.00

TeraFlex Flex Control Arms

From $1,239.99

• FlexArms allow custom pinion and caster angles to be set for proper alignment, they also are used to re-center the axle in the wheel well for proper suspension movement, and to adjust wheelbase length
• California Residents: WARNING

TeraFlex Swaybar Quick Disconnects

From $12.99

• TeraFlex Quick Disconnects are the leader in the industry
• The sway bar link uses a large polyurethane ball and pin for easy sway bar link removal
• When connected for street use the link provides immediate reaction during sway bar loading to eliminate excess play
• California Residents: WARNING

Synergy Manufacturing Tie Rod Clamps

From $75.00

• CNC machined from 1020 DOM material
• 100% bolt on
• Zinc plated for corrosion resistance
• Made in the U.S.A
• California Residents: WARNING

Synergy Manufacturing Front Track Bar Relocation Bracket

From $220.00

• This bracket raises the vehicle's axle side track bar mount
• Heavy-duty
• Special bolt-on design strengthens the factory mount that is prone to failure
• Laser cut from 3/16" steel & 2 stage powdercoat finish for maximum strength and durability
• Suspension components feature an abrasive resistant powder coat finish for maximum durability and corrosion resistance
• California Residents: WARNING

TeraFlex Trackbar Kits

From $278.99

• Adjustable Track Bar
• Frame Side Bracket
• Axle Side Bracket
• Use With High Steer Knuckle
• California Residents: WARNING

TeraFlex Ball Joints

From $155.99

• 1045 carbon steel housing with magnesium phosphate coated assembly
• 4140 chromoly ball/stud with magnesium phosphate anti-corrosion coating
• Factory style serrated flanged castle nut
• CR black neoprene boot
• California Residents: WARNING

TeraFlex Coil Springs

From $245.99

• Coil Springs
• Linear design with Extensive rate tuning and dynamic balance
• Deliver unsurpassed highway handling and off road performance
• Shot peened to reduce spring sag and fatigue
• Powdercoated for superior element protection
• Limited lifetime warranty against defects
• California Residents: WARNING

Synergy Manufacturing Shock Mounts

From $100.00

• Synergy Manufacturing products & systems have been designed by real engineers with 10+ years of suspension design & experience in the off road industry. All Synergy products are designed with the use of the latest CAD engineering software to ensure the highest level of fit, finish, and performance.
• California Residents: WARNING

TeraFlex Sway Bar Links

From $16.99

• Sway Bar Links
• Teraflex Front Links when connected provides immediate reaction during sway bar loading to eliminate excess play
• Rear Links are designed to reduce clearance issues between the tire and rear sway bar
• Available for different lift heights and fixed or quick disconnect styles
• California Residents: WARNING

Synergy Manufacturing Adjustable Front Lower Control Arms

From $500.00

TeraFlex Trackbar Brackets

From $105.99

• Front and rear applications
• Laser cut from 1/4? steel and accurately formed to ensure proper positioning for correct suspension geometry
• Track bar bracket restores the factory handling and correct roll center for a lifted vehicles
• Track bar brackets are recommended for superior drivability to reduce rear body roll tendencies by restoring the proper roll center of the vehicle
• Welding is recommended for final installation
• California Residents: WARNING

TeraFlex Bump Stops

From $115.99

• TeraFlex Rear Lower Bump Stop Pads are designed to work in conjunction with the SpeedBump bump stop system
• Proper bump stop length is critical to prevent damage to suspension components, shock absorbers, and fenders
• California Residents: WARNING

TeraFlex FlexArm Kits

From $1,410.99

• The TeraFlex FlexArm joint rebuild kit includes all required replacement components to rebuild a TeraFlex FlexArm joint.
• California Residents: WARNING

Synergy Lift Coil Springs

From $260.00

• Lift coil springs
• Synergy coils offer excellent off road performance while preserving ride quality
• Progressively wound
• keeps spring from coming unbound at suspension droop
• Progressively wound spring eliminates annoying spring clanking found on most suspension kits
• Feature frequency balanced and tuned spring rates to maximize suspension performance on and off road
• Suspension components feature an abrasive-resistant black powder coat finish for maximum durability and corrosion resistance
• Springs are designed to give the advertised amount of lift with use of aftermarket front bumpers & winches
• Sold in a pair
• California Residents: WARNING

TeraFlex Sway Bar Mounts

From $24.99

• Sway Bar Mount
• Available for front or rear
• Front is designed to raise sway bar mount up and out of the way for custom steering component clearance
• Rear ensures proper positioning for correct suspension geometry
• California Residents: WARNING

Synergy Manufacturing Axle Trusses

From $200.00

• Open top for easy upper link installation
• Rigid, boxed design made from 3/16" laser cut steel plate
• Designed to be used for 4 link suspensions
• Fits most differentials, D35, 44, 60, Ford 8.8", 9.0" & Chevy 14 bolt housings
• Link mount brackets are angled at 50 degrees apart from each other
• California Residents: WARNING

Synergy Manufacturing Control Arm Cam Bolt Kit

From $45.00

• Synergy 9/16" Control Arm Cam Bolt Kit
• Cam bolts are manufactured from high carbon heat treated steel
• All included components are zinc plated for maximum corrosion resistance
• 100% bolt on components assures an easy, trouble free installation with the use of basic hand tools
• Cam bolt offers 1/2" adjustment in either direction
• The bolt will work on a mounting width of 2.25 - 3"
• California Residents: WARNING

Synergy Manufacturing Rear Track Bar Brackets

From $100.00

• Bracket raises the vehicle's axle side track bar mount
• The vehicle's rollcenter is raised, reducing body roll and dramatically improving overall handling
• Special bolt on design strengthens the factory mount that is prone to failure
• Laser cut from 3/16" steel & 2 stage powdercoat finish for maximum strength and durability
• Suspension components feature an abrasive resistant powder coat finish for maximum durability and corrosion resistance
• California Residents: WARNING

Synergy Manufacturing Dodge Front Lower Control Arm

From $550.00

Synergy Manufacturing 2 Inch Front Bump Stop Spacer Kits

From $85.00

• Synergy Jeep JK, TJ, XJ, ZJ Front Bump Stop Spacer Kit
• Manufactured from high grade 6061 Billet Aluminum material
• Hard anodized finish eliminates oxidation that can occur under extreme elements
• Bump Stops fit inside front coils and provide 2", 3", and 4" of extra limitation for larger tires
• 100% bolt on components assures an easy, trouble free installation with the use of basic hand tools
• California Residents: WARNING

Synergy Manufacturing Bushings

From $30.00

• Bushing halves
• Bushing Kits
• Bushing Sleeves
• California Residents: WARNING

Synergy Manufacturing Front Track Bars

From $225.00

• Bent to clear most aftermarket differential covers
• Retains factory track bar mounting bolts and hardware
• Made from high quality 1-1/4 inch 1018 CR Solid Round Barstock
• Allows centering of front axle when running a suspension lift
• Features an abrasive resistant Powdercoat finish for maximum durability and corrosion resistance
• Made in the U.S.A
• California Residents: WARNING

TeraFlex Transfer Case Lowering Kit

From $39.99

• The TeraFlex transfer case lowering kit lowers the transfer case to reduce driveshaft vibration caused by increased ride height
• This is especially useful for Jeeps that have not installed a slipe yoke eliminator kit
• California Residents: WARNING