TeraFlex Swaybar Quick Disconnects

A: Front

A: Thanks for the inquiry none, the TeraFlex Swaybar Quick Disconnects part # TER1493000 these are for the front.

A: PART# 308 | Grease Zerk 1/4"-28 UNF Straight, Gold | TeraFlex Mon-Fri 8-5 MST Phone: 801.713.3314

A: Yes, Minimize the time it takes to go from the highway to off-road and back by converting your existing sway bar links to Quick Disconnects with the TeraFlex JK: Front Sway Bar Quick Disconnect Upgrade Kit.

A: The thread is 1/2-20 UNF, and pin size is 3/4.

A: I don't think this will work for your stock set up, if that is what you have. If you have the TeraFlex kit and need this as a replacement, then it would work.

A: Yes but this is just the pin. You need the entire disconnect assembly.

A: Thanks for the inquiry Mark, the TeraFlex Swaybar Quick Disconnects part # TER1743090 the measurement is 10 inches.

A: Hello Harleymick, The TeraFlex Swaybar Quick Disconnects TER1743090 are not adjustable. The do fit the 1997 to 2006 Jeep Wanglers with 2" to 6" of suspension lift. Thank you.

A: Hello Normally they don't but that also depends on the wheel you are running. If you have a wheel with a real deep back spacing yes they may rub. Thanks

A: Hello Johna Yes you are still in spec for this set of disconnects.

A: Hello Mike, the TeraFlex Swaybar Quick Disconnects comes in a complete kit.

A: Hello Augie, Thank you for asking. The TeraFlex Swaybar Quick Disconnects will work on your Jeep Cherokee if it has 2.5"-4" of lift.

A: Thanks for the question Richard TeraFlex Swaybar Quick Disconnects TER1743090 Yes, these will work with the suspension lift on your Jeep. You can replace the ones you have now with these. Thank you Answer box sales

A: Hello Jenna, These TeraFlex Swaybar Quick Disconnects are available for your Jeep XJ. The correct part # you would need is TER1713090.

A: Hello Hiko, Thank you for asking. The TeraFlex Swaybar Quick Disconnects are longer than the factory end links and will slightly change the degree of the swaybar. With the new degree change of the sway bar, it will not affect the driveability of your Jeep. Yes, the links will still reach the brackets.

A: Hello Spanishfly and thank you for your question! TeraFlex Swaybar Quick Disconnects part number TER175.010 is for a JK with 0-3" of lift. Use TER1753000 for your JK with a 3.5" lift. I hope my answer gets 4 Wheel Parts your business!

A: Hello Jason, The TeraFlex Swaybar Quick Disconnects will work on your stock jeep.

A: Hello Rob, Thank you for the question. The TeraFlex Swaybar Quick Disconnects Part Number: TER1753010 are only designed for the front of the 2007 to 2015 Jeep JK Wrangler, Rubicon and Unlimited. We highly recommend that you do not disconnect the rear swaybar of your vehicle.

A: Hello Professor, Thank you for the question. No, this set only fits vehicles with a 2.3" to 4" of suspension lift. Body lifts only space the cab of the vehicle up off the frame, they do not effect the actual vehicles suspension.

A: Hello jp, Thank you for the question. No, the only fit the 0" to 2" of lift.

A: Hi Blart Yes the TeraFlex 1743090 sway bar disconnects will fit your 1998 Jeep TJ with a 3" lift. Thank You

A: Hello Jim, Thank you for the question. You will need Part Number: TER1753000 for the 4" to 6" lift kit.

A: Hello Art, Thank you for the question. The TeraFlex Swaybar Quick Disconnects TER1743012 fit a 0" to 2" of lift. We do offer the Rubicon Express Gen2 Sway Bar Disconnects TJ 2.0”-3.5”/ XJ/ZJ 4.5”-5.5” R/ERE1141 that will fit your vehicle.