Rubicon Express Shock Mount Brackets

From $177.75

• Shock Mount Brackets
• Bare Steel
• Laser Cut from 3/16" cold rolled steel
• CNC Formed
• Welding required
• Sold as a pair
• California Residents: WARNING

Rubicon Express Add-A-Leaf Sets

From $60.99

• Add a double main leaf to your factory YJ spring pack to put positive arch back into the leaf pack. Designed specifically for spring-over applications and where extra load capacity is needed. Still very flexible when installed, minimizes axle wrap.
• California Residents: WARNING

Synergy Manufacturing Ball Joints

From $250.00

Rubicon Express Sway Bar Relocation Brackets

From $26.39

• These brackets are designed to move your XJ sway bar forward and down to increase spring clearance.
• California Residents: WARNING

Rubicon Express Shock Extensions

From $48.99

• Rubicon Express Shock Extensions are a must have when running a CV driveshaft for shock body clearance on your vehicle.
• California Residents: WARNING

Rubicon Express Sway Bar Disconnect Adapter Kits

From $17.50

• Bracket kit includes mounting hardware to allow installation of Rubicon sway bar disconnects or any other straight end link with dual shock eye style bushings. Adapter bracket kit allows the mounting of any straight end link or sway bar disconnect to the factory Jeep XJ or ZJ front sway bar. Includes offset lower mount for proper alignment.
• California Residents: WARNING

Rubicon Express Track Bar Bushing Kits

From $10.99

• Complete Kit
• Two Half Bushings
• One Crush Sleeve
• Press-In Installation
• California Residents: WARNING

Synergy Manufacturing Tie Rod Clamps

From $75.00

• CNC machined from 1020 DOM material
• 100% bolt on
• Zinc plated for corrosion resistance
• Made in the U.S.A
• California Residents: WARNING

Rubicon Express Extended Bump Stops

From $131.99

• The RE1399 is a new unique design which replaces factory bump stops with an extended steel unit with a polyurethane pad. A must have for 33 inch and bigger tires. Very clean design and will not shift like other styles.Self tapping mounting bolts included.
• California Residents: WARNING

Synergy Manufacturing Suspension Systems

From $1,070.00

• Synergy Manufacturing products & systems have been designed by real engineers with 10+ years of suspension design & experience in the off road industry.
• All Synergy products are designed with the use of the latest CAD engineering software to ensure the highest level of fit, finish, and performance.
• California Residents: WARNING

Synergy Manufacturing Front Track Bar Relocation Bracket

From $220.00

• This bracket raises the vehicle's axle side track bar mount
• Heavy-duty
• Special bolt-on design strengthens the factory mount that is prone to failure
• Laser cut from 3/16" steel & 2 stage powdercoat finish for maximum strength and durability
• Suspension components feature an abrasive resistant powder coat finish for maximum durability and corrosion resistance
• California Residents: WARNING

Synergy Manufacturing Shock Mounts

From $100.00

• Synergy Manufacturing products & systems have been designed by real engineers with 10+ years of suspension design & experience in the off road industry. All Synergy products are designed with the use of the latest CAD engineering software to ensure the highest level of fit, finish, and performance.
• California Residents: WARNING

Synergy Manufacturing Adjustable Front Lower Control Arms

From $500.00

Rubicon Express Gen II Sway Bar Links

From $20.99

• Keep your Jeeps Sway bar in its proper location after installing a suspension lift and ensure your Jeep handles safely with these sway bar links from Rubicon Express.
• California Residents: WARNING

Rubicon Express Coil Spring Mount

From $63.50

• Correct rear coil spring and track bar location woes after lifting your Jeep with a set of coil spring relocators from Rubicon Express.
• California Residents: WARNING

Rubicon Express Sway Bar Disconnect Center Tubes

From $25.99

• Rubicon Express Sway Bar Disconnect Center Tube
• California Residents: WARNING

Synergy Lift Coil Springs

From $1,480.00

• Lift coil springs
• Synergy coils offer excellent off road performance while preserving ride quality
• Progressively wound
• keeps spring from coming unbound at suspension droop
• Progressively wound spring eliminates annoying spring clanking found on most suspension kits
• Feature frequency balanced and tuned spring rates to maximize suspension performance on and off road
• Suspension components feature an abrasive-resistant black powder coat finish for maximum durability and corrosion resistance
• Springs are designed to give the advertised amount of lift with use of aftermarket front bumpers & winches
• Sold in a pair
• California Residents: WARNING

Synergy Manufacturing Axle Trusses

From $200.00

• Open top for easy upper link installation
• Rigid, boxed design made from 3/16" laser cut steel plate
• Designed to be used for 4 link suspensions
• Fits most differentials, D35, 44, 60, Ford 8.8", 9.0" & Chevy 14 bolt housings
• Link mount brackets are angled at 50 degrees apart from each other
• California Residents: WARNING

Synergy Manufacturing Control Arm Cam Bolt Kit

From $45.00

• Synergy 9/16" Control Arm Cam Bolt Kit
• Cam bolts are manufactured from high carbon heat treated steel
• All included components are zinc plated for maximum corrosion resistance
• 100% bolt on components assures an easy, trouble free installation with the use of basic hand tools
• Cam bolt offers 1/2" adjustment in either direction
• The bolt will work on a mounting width of 2.25 - 3"
• California Residents: WARNING

Synergy Manufacturing Rear Track Bar Brackets

From $100.00

• Bracket raises the vehicle's axle side track bar mount
• The vehicle's rollcenter is raised, reducing body roll and dramatically improving overall handling
• Special bolt on design strengthens the factory mount that is prone to failure
• Laser cut from 3/16" steel & 2 stage powdercoat finish for maximum strength and durability
• Suspension components feature an abrasive resistant powder coat finish for maximum durability and corrosion resistance
• California Residents: WARNING

Synergy Manufacturing 2 Inch Front Bump Stop Spacer Kits

From $85.00

• Synergy Jeep JK, TJ, XJ, ZJ Front Bump Stop Spacer Kit
• Manufactured from high grade 6061 Billet Aluminum material
• Hard anodized finish eliminates oxidation that can occur under extreme elements
• Bump Stops fit inside front coils and provide 2", 3", and 4" of extra limitation for larger tires
• 100% bolt on components assures an easy, trouble free installation with the use of basic hand tools
• California Residents: WARNING

Synergy Manufacturing Bushings

From $30.00

• Bushing halves
• Bushing Kits
• Bushing Sleeves
• California Residents: WARNING

Synergy Manufacturing Front Track Bars

From $225.00

• Bent to clear most aftermarket differential covers
• Retains factory track bar mounting bolts and hardware
• Made from high quality 1-1/4 inch 1018 CR Solid Round Barstock
• Allows centering of front axle when running a suspension lift
• Features an abrasive resistant Powdercoat finish for maximum durability and corrosion resistance
• Made in the U.S.A
• California Residents: WARNING

Synergy Manufacturing Cam Bolt Eliminator Kits

From $110.00

• Designed To Take Place Of Cam Bolts Used On Stock Control Arm Mounts
• Desirable For Users Who Are Removing Cam Bolts And Upgrading To Adjustable Control Arms
• Laser Cut 3/16" High Strength Steel
• Zinc Plated For Maximum Corrosion Resistance
• Includes 4 Washers
• California Residents: WARNING