ARB Deluxe Bar (Black) - 3412130

• Fitment: Direct Fit
• Only fits 70 series Land Cruiser models
• Toyota Land Cruiser 70, 71, 73, 74, 75, 78, 79 Series
• Only fits up-to 2007 on international models
• Black powder coat finish
• Durable steel construction
• Winch compatible (Winch not included)
• Retains factory tow points
• Recessed indicators
• California Residents: WARNING
+ View More Specs - View Less Specs

ARB Bondi Deluxe Front Bumper - 3450460

• Fitment: Direct Fit
• Durable steel construction for maximum protection
• Single-piece press formed centre pan
• Bash plate under panel included for added protection finished in vintage silver
• Twin high lift jack points in the bar perfect for use with ARB Jack or a mechanical jack
• Two aerial or driving light brackets located on the top of the centre tube
• Will accommodate Warn, Bushranger and Smittybilt low mount model electric winches up to 10,000lbs
• Provision to accommodate ARB Intensity LED's and a range of Bushranger and IPF lights
• Provision for OE Fog Lights. Refer fog light section below for additional parts required Brackets provided to accept either OE halogen or OE LED fog lights
• Dual chassis-mounted recovery points, powder-coated red for maximum visibility
• Bumper adds approximately 34mm to the overall length of the vehicle
• Approximate weight of the bumper, chassis mounts and fitting kit is 143lbs
• Approximately 42lbs is removed from the vehicle for fitment of the bar
• Zinc rich primer for additional corrosion resistance, followed by a textured Integrit black powder coat finish
• Chassis mounts manufactured with 5mm sheet steel
• Separate winch cradle manufactured from a combination of 4mm and 5mm sheet steel
• 76.1mm forward-facing top tube
• Wings and pan manufactured from 3mm sheet steel including press forms and multi folds for added structural integrity
• Wings designed to suit the flares of Rubicon models will also suit Sport and Sahara models with Rubicon or aftermarket front flares fitted
• Uprights manufactured from laser-cut 4mm sheet steel
• Fog light brackets provided to accept either OE halogen fog lights or OE LED fog lights
• California Residents: WARNING
+ View More Specs - View Less Specs

Poison Spyder Brawler Full Width Front Bumper with Shackle Tabs (Bare) - 17-64-020-D

• Fitment: Direct Fit
• 07-18 Wrangler JK, 2 & 4 Door
• Bare steel
• Full-width, multi-faceted design protects lower grille and extends to outer edge of stock flares
• CNC laser cut from 3/16"plate steel
• Precision brake-formed for a perfect fit
• Recessed light buckets accept OE fog lamps or Rigid Industries D-Series lights by use of adapter plate (sold separately)
• High clearance recovery shackle tabs CNC machined from 1" thick plate steel
• California Residents: WARNING
+ View More Specs - View Less Specs

Rampage TrailGuard Front Bumper - 99512

• Fitment: Direct Fit
• Integrated winch plate designed inside bumper allows for better air flow into radiator
• Accommodates up to a 12k lb. winch, including a Warn Zeon winch
• Winch-protecting angled bull bar
• 4” light opening fits factory or aftermarket fog lights
• Shackle mounts with D-rings included
• 5-year limited warranty
• California Residents: WARNING
+ View More Specs - View Less Specs

Warrior Front Winch Bumper with Brush Guard and D-Ring Tabs (Black) - 4530

• Fitment: Direct Fit
• 100% Designed, Manufactured, and Welded in the USA
• Unique rounded endcaps provide a clean and finished look
• Integrated winch plate and D-ring mounts
• Constructed using 3/16 steel plate and 11 gauge sheet metal
• Comes with welded 1-1/2 Tubular Brush Guard
• Unique Light Plate Systems allow for use of OEM or aftermarket lighting options
• Fog Light Delete Kit and Aftermarket LED Plates available and sold separately
• OEM Fog Lights NOT Included
• California Residents: WARNING
+ View More Specs - View Less Specs

Addictive Desert Designs Stealth Fighter Winch Front Bumper with Sensors - F551422770103

• Fitment: Direct Fit
• Ram 1500
• Winch mount
• Parking sensor cutouts
• Hammer black powder coat finish
• Satin black powder coat panel finish
• Mount for 40"" radius LED or 10 cube lights
• Modern radius plate design fits to the body
• Universal center light mount
• Optional winch mount
• Optional parking sensor cutouts
• Heavy duty steel structure
• CNC cut aluminum panels
• Reinforced clevis mounts allow use of 3/4"" D-Rings
• Fully bolt-on
• California Residents: WARNING
+ View More Specs - View Less Specs

Addictive Desert Designs Stealth Fighter Winch Front Bumper (Hammer Black) - F951232080103

• Fitment: Direct Fit
• 07-18 Wrangler JK, 2 & 4 Door
• Hammer black powder coat finish
• Satin black powder coat panel finish
• Winch mount included
• Universal light mount for up to 5 cube lights or a 20 inch radius light bar
• Mounts for cube lights on sides
• Radius plate steel design
• Greater approach angle
• Reinforced clevis mounts accept a 3/4 inch D-Ring
• Bolt-on application
• Lights and D-rings not included
• California Residents: WARNING
+ View More Specs - View Less Specs

Go Rhino Rockline Bumper Light Bar Mount - 25101T

• Fitment: Direct Fit
• 07-18 Wrangler JK, 2 & 4 Door
• Black
• Perfect additon to BRJ40 front bumper
• Bolt on installation
• Adds additional LED lights
• California Residents: WARNING
+ View More Specs - View Less Specs

Go Rhino Rockline Stubby Front Winch Bumper - 331100T

• Fitment: Direct Fit
• Wrangler JL, 2 & 4 Door
• Black textured black powder coat
• Easy no drill mount-uses factory bumper frame mounts
• Patented Rhino hook d-ring shackle mounts
• Pre-slotted top mount area for winch (up to 12,000 lb capacity)
• Constructed of 3/16 inch cold rolled steel
• 5-year warranty on finish
• Rockline Bumpers are NOT rated to be used with vehicle tow bars or with towing equipment of any kind
• California Residents: WARNING
+ View More Specs - View Less Specs

Go Rhino Rockline Stubby Front Winch Bumper with Center Hoop - 331101T

• Fitment: Direct Fit
• Includes welded 1.75 inch tubular center hoop
• Black textured black powder coat
• Easy no drill mount-uses factory bumper frame mounts
• Patented Rhino hook d-ring shackle mounts
• Pre-slotted top mount area for winch (up to 12,000 lb capacity)
• Constructed of 3/16 inch cold rolled steel
• 5-year warranty on finish
• Rockline Bumpers are NOT rated to be used with vehicle tow bars or with towing equipment of any kind
• California Residents: WARNING
+ View More Specs - View Less Specs

Go Rhino Rockline Winch Front Bumper (Black) - 331200T

• Fitment: Direct Fit
• Textured black powder coat finish
• One piece mild steel construction
• CNC laser cut and formed from 3/16 inch thick steel fully welded hand finished seams
• Fully welded 1 inch thick dual function patented rhino hooks with shackle mount for up to 7/8 inch D-Ring pin
• Integrated LED light bar / cube mounting plate supprts one 20 inch LED double row bar or up to four standard 3 inch cubes - lights not included
• Signature hex mesh cover
• Industry standard winch mounting slot
• Up to 12,000 pound capacity winch cut directly into the top surface
• Mounts without relocating factory engine components
• Grade 8 mounting fasteners coated in GEOMET Black are included
• No cutting or drilling required
• 5 year warranty
• Rockline Bumper is not rated to be used with vehicle tow bars or with towing equipment of any kind
• California Residents: WARNING
+ View More Specs - View Less Specs

Go Rhino Rockline Full With Front Bumper (Black) - 331201T

• Fitment: Direct Fit
• Textured black powder coat finish
• Zinc plated
• CNC laser cut and formed 3/16 inch thick steel fully welded hand finished seams
• Fully welded 1 inch thick dual function patented rhino hooks with cross hole for up to 7/8 inch D-Ring pin (D-rings sold separately)
• Integrated LED light bar / cube mounting plate supports one 20 inch LED double row bar or up to four standard 3 inch cubes (Lights sold separately)
• Signature hex mesh cover can be used with or with out lights to finish the overall look or simply protect the LED's
• Industry standard winch mounting slots, for up to 12,000 pound capacity winch, cut directly into the top surface
• Mandrel bent 1-3/4 inch OD tube fully welded with dual gusset over rider bar
• No drilling required
• Mounting fasteners included
• Rockline Bumpers are NOT rated to be used with vehicle tow bars or with towing equipment of any kind
• California Residents: WARNING
+ View More Specs - View Less Specs

Go Rhino Lower Skid Plate - 332100T

• Fitment: Direct Fit
• Wrangler JL, 2 & 4 Door
• Mounts to Rockline Stubby front winch bumper
• California Residents: WARNING

Warn Ascent Front Bumper (Black) - 107638

• Fitment: Direct Fit
• Angled design sits high to maintain maximum ground clearance and approach angles
• Winch ready - accepts most WARN mid-frame winches up to 12,000 lbs
• Bumper is pull-tested to 12,000 lb. capacity to ensure optimal performance while winching
• Bumper features integrated dual light ports to mount auxiliary flood or spot lights - not included
• Welded recovery points - ready for D-shackles (sold separately)
• Provisions to mount modular pre-runner Baja tube (PN 104825 sold separately)
• Bumper accommodates oversize tires allowing for better off-road performance
• Durable black textured powder-coat over 11-gauge steel withstands rigorous 408-hour salt spray testing, delivering upto 2X corrosion protection
• Does not accommodate Adaptive Cruise Control system
• Easy to install with pre-drilled bolt holes and cutouts make it easy to mount a WARN winch
• California Residents: WARNING
+ View More Specs - View Less Specs

Warn Ascent XP Front Bumper (Black) - 107660

• Fitment: Direct Fit
• Durable black textured powder coat finish
• Over 11-gauge steel withstands rigorous 408 hour salt spray testing, delivering up to 2X corrosion protection
• Stout one-piece construction
• Made from 11 gauge and 1/4" steel for exceptional durability
• Non-winch bumper provides increased front-end protection and an aggressive style
• Built-in slot accommodates a 30" light bar (lights not included)
• Dual light ports to mount auxiliary flood or spot lights (lights not included)
• Welded-on Baja style grille guard tube provides extra front-end protection
• Bumper may affect adaptive cruise control. Installation requires the removal of front tow hooks
• Bumper accommodates oversize tires
• Made in USA
• California Residents: WARNING
+ View More Specs - View Less Specs

ARB Summit Combar Front Bumper (Black) - 3423160K2