Road Armor Stealth Series Front Bumpers

A: Part Number: 914R4B : MAY EFFECT ADAPTIVE CRUISE CONTROL, NON-SENSOR MODELS

A: The Road Armor Stealth Front Winch Bumper with Titan Guard (Black) - PN: R/A617F2B comes TEXTURE BLACK from the manufacturer.

A: Note: If you have a EcoBoost, unbolt and remove intercooler cross member. Note : Install the 3/4” bolt so the threads are facing in and that the lock washer is up against the hex head of the bolt, not on the nut. Reason is because there is not enough room in the EcoBoost. In addition, check the bolt slots to make sure you have the brackets on the correct side. Note: If your truck is the EcoBoost, install the intercooler cross member.

A: Application : 2014-2020 Toyota 4RUNNER | 2017 Toyota 4Runner Limited https://www.4wheelparts.ca/sku/Road%20Armor/standard/RA9151FR0B.pdf

A: 220#

A: It fits 19-Current Silverado 1500 models engine size doesn't matter.

A: No it will not fit.

A: This Road Armor Low Profile front bumper weighs 75 lbs. (Without winch and lights) The bumper will not lower the front end of your vehicle.

A: Yes, the Rigid D-Series lights will work.

A: We do not have images of the light kit.

A: No - Road Armor says Warn M8000 or 9.5xp only.

A: It is bare steel, you would need to paint it. It is easier to install a winch when the bumper is off. All mounting hardware comes with the bumper. Shipping weight is 340#.

A: You didn't mention what year your truck is. This fits 2013-2020 RAM 1500.

A: It “SHOULD” work, but it has not been fit checked that specific a combination. The way the Blue Ox bar appears to mount, I don’t see a reason it wouldn’t work.

A: It's possible. We don't know until they roll out any new parts.

A: Yes it is

A: Hello David, Yes, this bumper will fit the 2009 to 2014 Ford F-150. Shipping costs and time lines can be had by adding item to the website cart and simply follow the prompts. Thank you for the question.

A: Hello Troy, Yes, you absolutely can flat tow with this bumper. The Roadmaster AT tow bar will fit. Thank you for the question.

A: Hello Clint, This bumper is winch-ready. It's ready for the winch to be mounted out of the box. No additional parts required. Thank you for the question.

A: Hello Dallas, Shipping weight is 277 lbs. Thank you.

A: Thanks for the inquiry private, the Road Armor Front Stealth Non-Winch Bumper with Square Light mounts and Pre-Runner Guard - Illuminator part # r/a406R4B-NW this part # r/a406R4B-NW the shipping weight is 270 pounds.

A: Hello Katie, Road Armor does not offer custom paint of powder coating options at this time. Please note that black powder coat is a fantastic primer for painting. Thank you.

A: Hello Blue, The Road Armor Front Stealth Winch Bumper in Satin Black is made to accept a 4"diameter light.

A: Hello Ryan, Thank you for asking. The Road Armor Front Stealth Winch Bumper in Satin Black cannot be ordered without a winch mount

A: Hello Todd, The Road Armor Front Stealth Winch Bumper with Lonestar Guard can be ordered Raw so you can take it to your local Line-X dealer.

A: Hello Randy, Thank you for asking. The Road Armor Front Stealth Winch Bumper with Titan II Guard in Satin Black weighs about 340 pounds

A: Hello Chris, The Road Armor Front Stealth Winch Bumper with Pre-Runner Guard in Satin Black will accept a Warn 16.5 winch.

A: Thanks for the question. Road Armor Front Stealth Winch Bumper in Satin Black R/A44060B The biggest winch you can use with this bumper is the Warn 16.5 TI (WAR68801) This is the one I would recommend for your truck with this bumper on it. Thank you

A: Yes this bumper can fit up to a 16.5k warn winch and also the 17k smittybilt too.

A: You could put the factory fog lights in the Road Armor Front Stealth Winch Bumper with Pre-Runner Guard in Satin Black they just will be smaller than the hole you are putting them in. Hope this helps!

A: Yes this will fit your truck sorry for the confusion.

A: s/b13047 will fit 3/4 shackles

A: Hello It does fit the international models also.

A: Thanks for the inquiry Ryan, the Road Armor Front Stealth Winch Bumper in Satin Black part # r/a23710b will work on a 2000 GMC HD as long as it does not have a body lift.

A: Hello T-Rexcursion and thank you for the inquiry on the Road Armor Front Stealth Winch Bumper with Pre-Runner Guard in Satin Black. The manufacturer has this part listed for a 2005 Ford Super Duty, but this item will fit your Excursion since it is exactly the same front end. Here is the link to get you back to the ordering page: http://jo.my/jtanzq.qrcode

A: Thanks for the inquiry clint. the Road Armor Front Stealth Winch Bumper with Pre-Runner Guard in Satin Black part # R/A382R4B the only matching rear part # is R/A38500B.

A: Hello Clint, the Road Armor Front Stealth Winch Bumper with Pre-Runner Guard in Satin Black part# R/A382R4B will fit your truck. Sorry for the inconvenience. We do also carry the rear stealth matching bumper part# R/a38500b. Thank you for your inquiry.

A: Thanks for the inquiry clint, the Road Armor Front Stealth Winch Bumper with Pre-Runner Guard in Satin Black part # R/A38204B for square lights you'll need part # R/A382R4B for a 2011-2014 CHEVY 2500/3500.

A: Hello brandon from orem utah, and thank you for the inquiry on the Road Armor Front Stealth Winch Bumper with Pre-Runner Guard in Satin Black. The lights on this bumper can be found here at this link: http://jo.my/q84r3x.qrcode or this link: http://jo.my/tlp8ik.qrcode

A: Thanks for the inquiry webb, the Road Armor Front Stealth Winch Bumper with Pre-Runner Guard in Satin Black part # R/A40804B will accomodate PIAA 510 series part # PIA05164, there are other lens options or the Warn 350F part # WAR82410.

A: Thanks for the inquiry Randy, the Road Armor Rigid Series Front Stealth Winch Bumper with Pre-Runner Guard in Satin Black part # r/a611r4b will work with the factory airbag deployment and you'll need to talk to your local dealer regarding the coverage of aftermarket products on your vehicle.

A: Thanks for the inquiry miketahoe, the Road Armor Front Stealth Winch Bumper with Pre-Runner Guard in Satin Black part # R/A99034B does not have the option for a 2 inch receiver.

A: Hello Steve, the Road Armor Front Stealth Winch Bumper with Lonestar Guard part# R/A66135B will not require trimming of your flares. The guard is positioned away from the vehicle for that reason. Thank you for your inquiry.

A: Hello D, the Road Armor Front Stealth Winch Bumper with Pre-Runner Guard in Satin Black part# R/A99014B is for 05 and newer tacoma trucks. We do carry the Arb bumpers for your truck. Thank you for your inquiry.

A: Hello Alfredo, Thank you for the question. We suggest the Warn 9.5XP Self-Recovery Winch Part Number: WAR68500

A: Hi Jim The R/A 23714Bbumper will fit the PiAA 510 series lights http://jo.my/ep0qs8 Thank You

A: Hello bradw75, Thank you for the question. According to the manufacturer this bumper only fits the 2011 to 2014 Chevy 2500 and 3500. The only bumper they offer with a hoop or grill guard is the part number R/A370R4B or without bar R/A370R0B

A: Hello Bob, Thank you for the question. Shipping weight is 270 lbs.

A: Ernest- Thanks for asking. Yes this Road Armor Front Stealth Winch Bumper in Satin Black will fit your 2012 Chevy Silverado 1500 4WD

A: D Brande- Thanks for your question. This Road Armor Front Stealth Winch Bumper with Agro Guard in Satin Black weighs 320lbs.

A: Hello Luke, Thank you for the question. The bumper has mounting holes but the original fog lights may need to be modified to install.

A: Linda- Thanks for asking. The Road Armor Rigid Series Front Stealth Winch Bumper with Pre-Runner Guard is only available in Satin Black

A: Thank you for your question Stolley. No you will not be able to instal the Sumatra 3000 Series Complete StepGuard Set over the Road Armor Front Stealth Winch Bumper in Satin Black

A: Roaming Lensman- Thanks for asking. The weight of the Road Armor Front Stealth Winch Bumper with Titan Guard in Satin Black will change the ride height of the front end of your 2011 FJ Cruiser but should not affect the ride quality in a noticeable way.

A: Hello Jeremy, Thank you for the question. The Road Armor Front Stealth Winch Bumper with Titan II Guard in Satin Black R/A60502B comes in a semi-gloss black satin powder coated finish. Road Armor only offers the bumper with round fog light openings.

A: No, Jair Head. Road Armor does not offer a Rigid Series Front Stealth Winch Bumper for your 2013 Dodge Ram 1500 at this time. You can see the front bumpers we do offer for your Dpdge Ram 1500 here: http://jo.my/frontbumpers Thank you for the inquiry.

A: Manny- Thanks for asking. We do offer the Car Care One financing option here http://jo.my/vwp4zb this can be used on any items including the Road Armor Front Stealth Winch Bumper with Pre-Runner Guard in Satin Black

A: Tebo- Thanks for the question. Yes the winch mounts behind the Road Armor Front Stealth Winch Bumper with Pre-Runner Guard in Satin Black. as for a winch to make mounting easy I would recommend the Smittybilt XRC8 that you can find here http://jo.my/p4mnqu and for lights the Pro Comp 7 inch HID lamps that you can find here http://jo.my/hbf99l

A: Nat- Thanks for asking. I cannot find a bumper that has been test fit with the snow plow mounting you are describing on your 2014 Chevy 3500 4x4.

A: Walter- Thanks for the question. I only show the Satin black Road Armor Front Stealth Winch Bumper in our system

A: Hello Tk, The Road Armor Front Stealth Winch Bumper with Pre-Runner Guard in Satin Black R/A44064B only comes in Satin Black. Thanks for the email.

A: Jerry- Thanks for asking. The TRD logo you see in the picture is something the owner added to the Road Armor Satin Black Front Stealth Winch Bumper with Pre-Runner Guard

A: Kamuelaboy- Thanks for asking. The Road Armor Front Stealth Winch Bumper with Pre-Runner Guard in Satin Black weighs in at 270 lbs. and does not have light tabs.

A: Mason- Thanks for asking. Road Armor does not specify which models of lights are mounted to the Front Stealth Winch Bumper with Lonestar Guard in the picture but I can tell you the brands. The square LED lights are Vision X and the round ones in the bumper are PIAA.

A: Thank you for your question. The Road Armor Front Stealth Winch Bumper with Pre-Runner Guard in Satin Black part number R/A61104B is only sold with a Satin Black finish.

A: Hello con, Shipping weight is 188lbs on the Road Armor Front Stealth Winch Bumper with Titan Guard in Satin Black R/AFJ801B. Thank you for the email.

A: According to Road Armor you should be able to attach a tow bar to the Front Stealth Winch Bumper with Titan Guard in Satin Black to be able to tow your FJ Cruiser behind your RV.

A: I called Road armor to see if they had seen a Fisher Minute Mount with the Road Armor Front Pre-Runner Guard Stealth Winch Bumper in Satin Black. They have not seen that particular combination but they said with other plow mounts they have seen most people either modify the plow mount or modify the bumper to make it fit.

A: The Road Armor Front stealth bumper weighs 320lbs. Road Armor does not specify if the bumper is air bag compatible.