ARB Summit Front Bumpers

A: It comes with a template and requires cutting body panels where it wraps under headlights. It took 10 hours to install bumper and winch on my 2015 tundra.

A: Front fenders

A: This is bolt-on installation for a 14-Current Toyota Tundra.

A: It depends on where the camera is mounted. On my 2021 TRD Sport, which also has adaptive cruise control, the camera is mounted on the windshield. Clearly the bumper will not interfere with a dash mounted camera.. The updated, more expensive and harder to find bumper that relocates the camera is not necessary if the camera is mounted in the windshield. Likewise, my radar antenna is mounted in the center of my grille. The radar antenna IS NOT the issue. There are is an option package that comes with grille mounted camera. Only if you have that option package (TRD Pro I think) do you need the newer bumper.

A: I believe there was an update to the bumper design sometime this year where the TSS sensor and camera can be relocated to the lower grille of the bumper

A: No, this bumper is not compatible with the parking sensors or collision sensors on your vehicle.

A: Thanks for the answer. 4 Wheel Parts was sold in Post Falls Idaho near my home. Decided to go with a CBI aluminum bumper to PUNT the next “Bambi” I encounter on a Eastern Washington highway. The CBI has a winch mount. 

A: They make another version of this bumper for the ZR2 different Part number 3462060K, I think.

A: It does, you will need to use all the spacer plates provided with the bumper otherwise the winch will sit against the body.

A: Yes the Smittybilt X2O GEN3 10K Winch with Synthetic Rope - 98810 will also fit this bumper.

A: Not sure about the cbi, but it is with the GM skidplate on the Non-ZR2.

A: Not sure if this helps but I have this bumper and it did not obscure any of the mounting points for the stock skid plates. 

A: Yes. However, please double check with ARB to make sure.

A: Yes, 2017 Toyota 4Runner TRD Pro is listed. (2014-22 Toyota 4Runner) * PN: ARB3421570k compatible with OE Fog lights and Toyota safety sense. | * optional hawse Fairlead spacer kit part no PN: ARB3500600 required when Fitting a hawse Fairlead | * optional roller Fairlead cover PN: ARB3500850 available | * warn part no PN: WAR89965 required when Fitting warn Zeon and Zeon platinum winch | * designed For sr5, trail and trd models. Will not fit limited And niGHtSHAde model-s. | * warn part PN:WAR94288 may be required when Fitting warn Zeon platinum winch. | * WARN PN: WAR106011 WIRE EXTENSION EQUIRED WHEN FITTING WARN VR EVO.

A: it WILL fit with heavy modding, you will need to purchase headlight filler panels (AEV), have them paint matched to your vehicle and swap to a ZR2 bison grill to do it. Otherwise you will require quite a bit of heavy modifying and cutting for it to fit the 2021 ZR2... i am in the same boat!

A: My ZR2 is a 2018, so Im not sure how they have changes the design from the 2018-2021.

A: The winch is not included. 

A: the winch is separate. This is the way it has to be, because you may prioritize different things in a winch. The bumper accommodates the winch by giving you a place to bolt it down, it does not come with the winch.

A: It does not come with the ARB Intensity lights shown in the center of the picture. 

A: Yes. The ARB Sumit bumper I received did come with the fog lights. 

A: That's only partially right. The bumper mounted sensors are on the rear bumper, not the front. The front mounted collision, cruise sensor is in a radar array in the grille, and a camera in either the windshield or mounted in the grille does the lane assist. The location of the camera depends on the trim package of your truck. The only thing the newer bumper relocates is the grille mounted camera. I have a 2021 TRD Sport with this bumper. The camera is in the windshield, the radar antenna is in the center of the grille. Everything works as it should.

A: Hello Jasper, This bumper is not compatible with parking sensors or collision sensors. Thanks for checking us out, we appreciate your business.

A: No you cant use the factory, but it comes with a set. You will want ARB to email you the install instructions, the printed ones in the box are impossible to see anything in the photos. The only other piece i got were some of the plastic push rivets to attach the fender liner to the pan vs. just tucking it inside

A: Works w/ OE Ford under panel

A: Yes, the fitment guide shows it fitting,

A: Yes this will work with ARB's UVP belly pans.

A: The ARB Bumper bolts to the frame. Give our Sales & Support - 877-474-4821 a call.

A: It doesn’t impede the sensors in the grill.  I don’t know if your package has more sensors beyond the one in the grill, but there are not adapters for other sensors or anything on this bumper.  

A: The following winches fit the ARB3480010 ARB Summit Winch Bumper: Warn ZEON 8, 8-S, 10, 10-S, ZEON Platinum 10, 10-S, VR EVO 8, 8-S, 10 and 10-S. Smittybilt Gen2 X20 10K. Warn M8000, XD9000, 9.5XP, 9.5XDC fitment has not been confirmed. Control boxes may need to be relocated. The winch body fits but control box may not fit under top pan press form.

A: FITS: 2020-2021 TOYOTA TACOMA Part number: 3423160K2 includes, Tacoma Summit Winch Bumper, bumper fitting kit, winch install kit, ARB fog light kit, ARB fog light look and Camera Relocation Kit. FITS: 2016-2019 TOYOTA TACOMA: Part number: 3423160K includes, Tacoma Summit Winch Bumper, bumper fitting kit, winch install kit, ARB fog light kit and ARB fog light loom

A: Will accommodate Warn, Magnum, Bushranger, Smittybilt low mount model electric winches up to 10,000lb. Would recommend the Warn VR EVO 10-S Winch with Synthetic Rope - 103253

A: Here is the PN: 2840050 The recovery point re-uses OE tow hook fasteners.

A: Vehicle-specific design for the Toyota 4Runner 2014 -2021 model excluding the Limited & Nightshade Special Edition model. Includes current generation models fitted with Adaptive Cruise Control.

A: Please Contact ARB Tech Dept. at 425-264-1391 for fitment questions.

A: 280#

A: I don’t think so. Contact ARB. They are very knowledgeable. 

A: According to ARB, for the Z71 model you need part number 3462050K: https://www.4wheelparts.com/p/arb-colorado-summit-front-bumper-kit-3462050k/_/R-BHWQ-3462050K

A: Per ARB: We have not tested this winch. We added the instructions to this bumper. It will be on the site tomorrow 4/28/21.

A: We provide a skid plate that will mount under the bumper.

A: Yes this is true.

A: Yes this bumper will fit. Here is a list of compatible Warn winches. WARN ZEON 8-10K, M8000, XD9000, 9.5XP, 9.5XDS

A: This item ships from ARB, we do not stock it. So it would depend on if they have it in stock or not. I would also need your zip code to quote you freight. If you add this to your cart and enter your zip code, you will see the total. You can always have our sales team call ARB to see if they have it in stock: Toll Free: 1-877-474-4821

A: A hoop would be a bar that sits up on top of a bumper. A stinger is a much larger hoop that would actually sit higher than the hood. This bumper comes with the bars on it as pictured.

A: If you require to have a front plate, this bumper would need small modification.

A: Yes it does.

A: This bumper weighs 183 lbs.