Rugged Ridge Front Bumper Cover

From $119.99

• Hard-wearing injection molded plastic
• For use with RUG11540.10 and RUG11540.11 XHD bumpers only
• Easily removable at the trail for better access to the D-ring
• California Residents: WARNING

Rugged Ridge Grille Guards

From $199.99

• Rugged Ridge Grille Guard
• Textured black and Gloss Black AVailable
• Bolts to stock bumper
• Does not accept winches
• California Residents: WARNING

Rugged Ridge Brush Guards

From $119.99

• Textured black powder coat
• California Residents: WARNING

Rugged Ridge RRC Grille Guard Bumper

From $349.99

• Textured black powder coat
• Low profile bumper ideal for tight approach angles
• 3/16 inch laser cut steel
• Integrated and welded eyelets for attaching d-ring shackles
• Top holes for mounting tow hooks
• Predrill
• California Residents: WARNING

Smittybilt XRC Front Bull Bars

From $117.99

• Two-stage textured matte black powdercoat finish
• Requires front bumper part number S/B76810
• Manufactured from 1.75 inch tubing
• Two light tabs that can accommodate up to a 9 inch light
• Capable of mounting up to a 15,000 lb. winch
• 5-year limited warranty
• California Residents: WARNING

Smittybilt XRC Gen2 Front Bumpers

From $654.49

• UHMW (ultra-high-molecular-weight polyethylene) to provide the ultimate protection for rock crawling
• Manufactured from 3/16-inch cold rolled steel with two-stage textured matte black finish
• Powdercoat finish - 5 year limited warranty
• Smittybilt limited lifetime warranty
• Lower design winch plate allows greater air flow and rated to accommodate up to 12k winch
• 1.75" diameter .120 wall overrider and kickers
• O.E. fog light provision and towable D-ring mounts
• California Residents: WARNING

Smittybilt XRC Gen2 Rear Bumpers

From $594.99

• UHMW (ultra-high-molecular-weight polyethylene) to provide the ultimate protection for rock crawling
• Manufactured from 3/16-inch cold rolled steel with two-stage textured matte black finish
• Powdercoat finish - 5 year limited warranty
• Smittybilt limited lifetime warranty
• LED lights included
• Modular design tire carrier can be added (sold separately)
• Fender-to-fender protection
• Aux back up light cut out provided
• Class III hitch for true towing with towable D-ring mounts
• Anti-rattle provision provided for receiver hitch
• Works with XRC GEN2 tire carrier (#76857)
• California Residents: WARNING

Smittybilt Adventure Series Front Bumpers

From $1,169.99

Smittybilt Apollo Front Bumper

From $728.99

• High and tight design for maximum clearance
• 1.5" x .120" wall structural tubing with 1/8" and 3/16" laser cut cold rolled sheet metal
• Removable overrider with front camera provision
• Winch compatible up to 12K
• Fits all non-Rubicon model OE fog lights
• D-ring recovery and jack points

Rugged Ridge Spartan Front Bumpers

From $119.99

• One-piece design
• Features ultra-aggressive high clearance bumper ends that angle cleanly upward to match the profile of factory fender flares
• Built from high-strength plate steel that utilizes fold & weld construction for greater structural integrity, precise fit and a high-quality appearance
• Rugged textured black powder coat resists rust and corrosion
• Incorporates a stand-alone winch plate as the central backbone for the bumper
• Includes D-shackle mounts
• Direct bolt-on replacement for 2007-2020 Wrangler JK, Wrangler JL and Gladiator JT models
• Includes all the necessary hardware for a worry-free installation
• California Residents: WARNING

Smittybilt Apollo Rear Bumper

From $674.99

• Unique and aggressive stubby design
• Formed and shaped with robust appearance and solid performance
• 1.5" x .120" wall structural tubing with 1/8" laser cut cold rolled sheet metal
• Factory and HD Pivot tire carrier approved
• Auxiliary back up lights included
• D-ring recovery and jack points
• Robotically welded assembly for consistent penetration
• Use factory or Smittybilt JH46 Trailer Hitch with receiver for towing

Smittybilt M1 Rear Bumpers

From $1,199.99

• Two Stage Matte Black Finish powder coat Finish - 5 year Limited Warranty
• Manufactured from 3/16 inch & 1/4 inch cold roll steel
• Solid Mount D-Rings Welded on the inside and out
• Smittybilt Advantage Warranty
• California Residents: WARNING

Rugged Ridge All Terrain Modular Front Bumpers

From $399.99

• Fits 2007 to 2016 JK Wrangler, Rubicon and Unlimited
• 2 and 4-door models
• Polished stainless
• Protects fenders
• Sold as a pair
• Must be used with Rugged Ridge center section
• California Residents: WARNING

Warrior Mid-Width Front Bumpers

From $1,491.99

• Warrior’s heavy-duty Mid-Width Front Bumper with Fog Light Mounts is designed for the off-road enthusiasts
• Constructed from high-quality steel, bumpers are black powder-coated for lasting durability and good looks.
• The optional Brush Guard is a one-piece welded guard that is formed from 1 1/2 inch round steel tubing, and provides protection from shrubbery when off-roading to the front grill and headlights.
• NOTE: OEM Fog Lights NOT Included. D-Ring Shackles Sold Separately.
• California Residents: WARNING

Rugged Ridge RRC Rear Bumpers

From $349.99

• Rugged Ridge RRC Rear Bumper
• Textured black
• Reinforced hitch box that is designed for off road accessories
• Not designed for towing
• Heavy-duty grid like system with raised sides
• For ultimate protection and greatest ground clearance
• California Residents: WARNING

Wilco Offroad Replacement Front Bumpers

From $306.83

• Innovative new replacement bumpers offer high-strength and reduced weight
• 57 pound complete standard bumper
• Protects the vehicle, reduces weight
• Steel slides better over rock than aluminum
• California Residents: WARNING

Warrior Stubby Front Bumper

From $797.99

• Black powder coat
• Available with and without D-ring mounts
• Available with and without grille guard
• California Residents: WARNING

Warrior MOD Series Stubby Front Bumpers

From $1,372.99

• 100% USA Made
• Stubby design provides excellent functionality in an extremely compact package
• Designed with maximum clearance in mind
• Constructed using heavy-duty 3/16” steel
• Finished with a two stage powder coat (primer and finishing coat) for long lasting durability
• Features an accessory mount rail with pre-punched mounting slots above the fairlead
• Heavy-duty D-ring shackle mounts welded to both the outer skin
• Directly to the frame mounts for superior strength
• Includes additional pre-punched slots for optional no-drill accessory mounting
• Accessory mounting slots will easily accommodate 1/2” threaded fasteners
• Has smooth contours to avoid off-road snags
• Sleek rugged look that compliments the Jeep’s natural body lines
• Integrated winch and fairlead mounts - Direct fit for most standard winches (including Warn Zeon series)
• Built in off-road jack lift points which double as bottle opener tabs
• Integrated accessory rail spans the entire width of the 1-1/2” diameter, .120” wall heavy-duty brush guard tube
• Welded sheet metal brush guard verticals include additional pre-punched accessory mounting slots along the front and back surfaces
• Accessory rail relief cutouts provide locations to wrap a strap around the tube, or a convenient hand grip location