Smittybilt XRC Front Bull Bars

From $117.99

• Two-stage textured matte black powdercoat finish
• Requires front bumper part number S/B76810
• Manufactured from 1.75 inch tubing
• Two light tabs that can accommodate up to a 9 inch light
• Capable of mounting up to a 15,000 lb. winch
• 5-year limited warranty
• California Residents: WARNING

Wilco Offroad Replacement Front Bumpers

From $306.83

• Innovative new replacement bumpers offer high-strength and reduced weight
• 57 pound complete standard bumper
• Protects the vehicle, reduces weight
• Steel slides better over rock than aluminum
• California Residents: WARNING

Warrior Stubby Front Bumper

From $841.99

• Black powder coat
• Available with and without D-ring mounts
• Available with and without grille guard
• California Residents: WARNING

Smittybilt XRC Gen2 Front Bumpers

From $654.49

• UHMW (ultra-high-molecular-weight polyethylene) to provide the ultimate protection for rock crawling
• Manufactured from 3/16-inch cold rolled steel with two-stage textured matte black finish
• Powdercoat finish - 5 year limited warranty
• Smittybilt limited lifetime warranty
• Lower design winch plate allows greater air flow and rated to accommodate up to 12k winch
• 1.75" diameter .120 wall overrider and kickers
• O.E. fog light provision and towable D-ring mounts
• California Residents: WARNING

Smittybilt XRC Gen2 Rear Bumpers

From $594.99

• UHMW (ultra-high-molecular-weight polyethylene) to provide the ultimate protection for rock crawling
• Manufactured from 3/16-inch cold rolled steel with two-stage textured matte black finish
• Powdercoat finish - 5 year limited warranty
• Smittybilt limited lifetime warranty
• LED lights included
• Modular design tire carrier can be added (sold separately)
• Fender-to-fender protection
• Aux back up light cut out provided
• Class III hitch for true towing with towable D-ring mounts
• Anti-rattle provision provided for receiver hitch
• Works with XRC GEN2 tire carrier (#76857)
• California Residents: WARNING

Rugged Ridge Venator Front Bumpers

From $1,099.99

• Muscular stamped steel construction
• Patented design features sculpted contours and sweeping arches
• Features built-in winch plate and massive 1-inch thick recovery hooks
• Octagonal pockets accept factory JL / JT fog lights
• Easy bolt-on installation

Rugged Ridge XOR Rear Bumpers

From $479.99

• Built from 5mm-thick steel plate
• Narrow profile, arching ends
• Integrated jack lifting points
• Bumper proximity sensor ports built right in
• Works with your factory trailer hitch
• Mounting hardware included
• No cutting or drilling required

Rugged Ridge HD Front Bumpers

From $549.99

• Available in Stubby or Full Width
• Engineered to mount most any aftermarket winch
• Built-in jack lifting points at every corner
• Massive recovery hooks, each one dual-drilled to work with both 3/4 and 7/8-inch shackles
• Satin black powder coat finish
• Limited 5-year warranty

Rugged Ridge XOR Front Bumpers

From $349.99

• Built from 5mm-thick steel plate
• Built-in skid plate
• Integrated top-mount winch plate
• Massive 1”-thick shackle mounts
• Accommodates 3/4-inch shackles (not included)
• Recessed fog light pockets
• Works with standard OE fog lights
• Does not work with Altitude or LED fog lights
• Bolt-on installation
• Mounting hardware included for installation
• No drilling or cutting required

Smittybilt Apollo Front Bumper

From $728.99

• High and tight design for maximum clearance
• 1.5" x .120" wall structural tubing with 1/8" and 3/16" laser cut cold rolled sheet metal
• Removable overrider with front camera provision
• Winch compatible up to 12K
• Fits all non-Rubicon model OE fog lights
• D-ring recovery and jack points

Rugged Ridge Spartan Front Bumpers

From $119.99

• One-piece design
• Features ultra-aggressive high clearance bumper ends that angle cleanly upward to match the profile of factory fender flares
• Built from high-strength plate steel that utilizes fold & weld construction for greater structural integrity, precise fit and a high-quality appearance
• Rugged textured black powder coat resists rust and corrosion
• Incorporates a stand-alone winch plate as the central backbone for the bumper
• Includes D-shackle mounts
• Direct bolt-on replacement for 2007-2020 Wrangler JK, Wrangler JL and Gladiator JT models
• Includes all the necessary hardware for a worry-free installation
• California Residents: WARNING

Smittybilt Orion Front Bumpers

From $764.99

• Smittybilt Orion Front Bumpers

Smittybilt Adventure Series Front Bumpers

From $1,299.99

Smittybilt Apollo Rear Bumper

From $674.99

• Unique and aggressive stubby design
• Formed and shaped with robust appearance and solid performance
• 1.5" x .120" wall structural tubing with 1/8" laser cut cold rolled sheet metal
• Factory and HD Pivot tire carrier approved
• Auxiliary back up lights included
• D-ring recovery and jack points
• Robotically welded assembly for consistent penetration
• Use factory or Smittybilt JH46 Trailer Hitch with receiver for towing

Rugged Ridge Spartan Rear Bumpers

From $449.99

• One-piece design features a full-width profile
• Sturdy all-steel construction with welded ends
• Center section features a recess that provides additional clearance for larger wheel & tire combinations
• Integrated shackle plates that anchor to the frame for solid vehicle recovery
• Direct bolt-on installation and works with all factory equipment including factory tow hitch
• 5-year limited warranty
• California Residents: WARNING

Rugged Ridge Spartacus Rear Bumpers

From $749.99

• Innovative stamping process delivers cutting-edge style in a lightweight bumper
• Sturdy 11-gauge stamped steel construction
• Tough satin black powder coat finish
• Features built-in recovery hooks
• Works with both factory and aftermarket hitch

Rugged Ridge HD Rear Bumpers

From $549.99

• Built-in jack lifting points at every corner
• Massive recovery hooks, each one dual-drilled to work with both 3/4 and 7/8-inch shackles
• Satin black powder coat finish
• Limited 5-year warranty

Rugged Ridge Spartan Front Bumper Overrider

From $119.99

• Overrider only - bumper sold separately
• Aggressive addition for Rugged Ridge Spartan front bumpers
• Satin black finish provides styling while resisting rust and corrosion
• Features dual off-road light mounting tabs
• Easy bolt-on design
• Limited 5 year warranty

Rugged Ridge Arcus Front Bumpers

From $139.99

• High-strength 11-gauge steel shell surrounding a 1/4-inch thick steel winch plate
• Capable of holding most model winches up to a 12.5k lb. rating
• Accepts Hawse or roller-style fairleads
• Massive 1-inch thick recovery hooks
• Each hook is dual cross-drilled so they accept both 7/8 and 3/4-inch D-rings
• Built-in fog light pockets
• Accepts both factory Sport & Sahara fog light assemblies with no modification
• High-quality satin black powder coat finish with a fine texture

Rugged Ridge Arcus Rear Bumpers

From $599.99

• tamped-steel body
• High-strength 11-gauge steel shell
• Massive 1-inch thick recovery hooks
• Each hook is dual cross-drilled
• Accepts both 7/8 and 3/4-inch D-rings (sold separately)
• Recesses on both sides of the bumper offer direct frame access
• Satin black powder coat finish with a fine texture