Synergy Lift Coil Springs

From $260.00

• Lift coil springs
• Synergy coils offer excellent off road performance while preserving ride quality
• Progressively wound
• keeps spring from coming unbound at suspension droop
• Progressively wound spring eliminates annoying spring clanking found on most suspension kits
• Feature frequency balanced and tuned spring rates to maximize suspension performance on and off road
• Suspension components feature an abrasive-resistant black powder coat finish for maximum durability and corrosion resistance
• Springs are designed to give the advertised amount of lift with use of aftermarket front bumpers & winches
• Sold in a pair
• California Residents: WARNING

Synergy Manufacturing Axle Trusses

From $200.00

• Open top for easy upper link installation
• Rigid, boxed design made from 3/16" laser cut steel plate
• Designed to be used for 4 link suspensions
• Fits most differentials, D35, 44, 60, Ford 8.8", 9.0" & Chevy 14 bolt housings
• Link mount brackets are angled at 50 degrees apart from each other
• California Residents: WARNING

Synergy Manufacturing Control Arm Cam Bolt Kit

From $45.00

• Synergy 9/16" Control Arm Cam Bolt Kit
• Cam bolts are manufactured from high carbon heat treated steel
• All included components are zinc plated for maximum corrosion resistance
• 100% bolt on components assures an easy, trouble free installation with the use of basic hand tools
• Cam bolt offers 1/2" adjustment in either direction
• The bolt will work on a mounting width of 2.25 - 3"
• California Residents: WARNING

Synergy Manufacturing Rear Track Bar Brackets

From $100.00

• Bracket raises the vehicle's axle side track bar mount
• The vehicle's rollcenter is raised, reducing body roll and dramatically improving overall handling
• Special bolt on design strengthens the factory mount that is prone to failure
• Laser cut from 3/16" steel & 2 stage powdercoat finish for maximum strength and durability
• Suspension components feature an abrasive resistant powder coat finish for maximum durability and corrosion resistance
• California Residents: WARNING

Pro Comp Leaf Springs

From $154.99

Synergy Manufacturing Control Arms

From $1,595.00

• Synergy Manufacturing products & systems have been designed by real engineers with 10+ years of suspension design & experience in the off road industry. All Synergy products are designed with the use of the latest CAD engineering software to ensure the highest level of fit, finish, and performance.
• California Residents: WARNING

Synergy Manufacturing Rear Sway Bar Links

From $125.00

• Sway Bar Links
• Rear
• Compatible with lifts 2" and up
• Easy installation - 100% bolt on components
• Uses stock mounting hardware
• Made from 11/16" solid 1018 steel and are clear zinc plated for maximum corrosion resistance
• Can be cut down and retapped easily for custom applications
• Works with most aftermarket wheels up to 4.75" back spacing
• High quality rod end reduces bushing deflection causing the swaybar to opperate more efficiently
• Sold as a pair
• Made in the USA
• California Residents: WARNING

Synergy Manufacturing Dodge Front Lower Control Arm

From $550.00

Synergy Manufacturing Bushings

From $125.00

• Bushing halves
• Bushing Kits
• Bushing Sleeves
• California Residents: WARNING

Synergy Manufacturing Front Track Bars

From $225.00

• Bent to clear most aftermarket differential covers
• Retains factory track bar mounting bolts and hardware
• Made from high quality 1-1/4 inch 1018 CR Solid Round Barstock
• Allows centering of front axle when running a suspension lift
• Features an abrasive resistant Powdercoat finish for maximum durability and corrosion resistance
• Made in the U.S.A
• California Residents: WARNING

Synergy Manufacturing Steering Stabilizer Relocation Kit

From $105.00

• Designed to relocate the factory stabilizer up and out of harms way
• The kit includes grade 8 hardware and is easily installed using basic hand tools
• Manufactured from high strength 3/16 inch steel
• Powdercoated for corrosion resistance
• Requires 2 inch bump stop spacers
• Note: 2011 and newer Jeeps will require the use of the 8003 Tie Rod Clamp
• Made in the U.S.A
• California Residents: WARNING

Synergy Manufacturing Bracket Kit

From $200.00

• Easy installation
• 2.0 inch reservoir mounts sold separately
• Extended bracket measures 17 inch from bottom of bracket to center of bolt hole
• Made in the USA
• California Residents: WARNING

Synergy Manufacturing Front Air Bump Bracket Kit

From $140.00

Synergy Track Bar Brackets

From $30.00

• Bracket can be trimmed to desired height to adjust the mounting position of the track bar to alighn the track bar and drag link in the same plane.
• California Residents: WARNING

Pro Comp 2.5" PRO-VST Series Shocks

From $1,299.99

• Sold as a pair
• Hard anodized silver finish
• Maximum off-road performance
• 2.5" body outer diameter paired with a full bore piston to maximize damping capability
• 6061-t6 impact forged aluminum body for increased strength and lower shock temperatures
• Hard anodized body finish for increased strength and lower shock temperatures
• Tuned specific to the vehicle application to maximize ride quality and suspension travel
• 17-4 stainless steel chrome plated shaft for strength and corrosion resistance
• 3/4" OD shaft for reduced seal friction and gas force
• Internal floating piston separates nitrogen and oil to improve damping response and eliminate cavitation

Pro Comp PRO-M Monotube Shock Absorbers

From $107.99

• 2" body diameter
• Durable silver powder coat finish
• Monotube construction
• Nitrogen gas charged
• Vehicle specific valving
• Multi-stage disc pack
• 14mm chrome hardened shaft
• Polyurethane shock boots included
• Great feel on-road, great performance off-road

Pro Comp PRO-X Shock Absorbers

From $15.00

• 2" body diameter
• Smooth black finish
• Twin tube construction
• Nitrogen stabilized
• Velocity sensitive valving
• 1-3/8" nylon banded piston
• 5/8" chrome hardened shaft
• Optional shock boots sold separately
• On-road and light off-road

Pro Comp Pro Series Front Upper Control Arms

From $755.99

• Pro Series heavy-duty ball joint allows for increased strength and angle for greater wheel travel for lifted applications without sacrificing ride quality
• Billet o-ring dust cap and sealed ball joint assembly protects the ball joint assembly from corrosion, dirt and debris in harsh off-road conditions
• Gusseted pivot and ball joint housings are designed for maximum clearance and engineered for maximum strength for lifted applications
• Helix grooved multi-rate bushing assembly using PTMEG urethane preserves lubrication and protects from debris for less maintenance with PTMEG cross linked urethane providing more durability over standard bushings
• Super durable polyester black powder coat long lasting finish that maintains a premium look and protects from humidity and corrosion

Pro Comp PRO-X Twin Tube Steering Stabilizers

From $18.00

• Shock series: PRO-X Hydraulic Steering Stabilizer
• Finish: Black powder coat
• 1-3/8" nylon banded piston
• 5/8" chrome hardened shaft
• Optional shock boot sold separately
• Sold individually
• California Residents: WARNING

Pro Comp PRO-M Steering Stabilizers

From $99.99

• Reduce bump steer and wheel shimmy
• Vehicle specific bolt-on kits for easy installation
• Reduces wear and tear on ball joints & tie rods
• 14mm chrome hardened shaft

Synergy Manufacturing Steering Stabilizer Clamps

From $25.00

Pro Comp Stage III Lift Kits

From $1,611.97

Pro Comp Pro Runner Monotube 2.5 Piggy Back Reservoir Shocks

From $431.99

Synergy Manufacturing Rear Track Bars

From $225.00

• Bent to clear most aftermarket differential covers
• Retains factory track bar mounting bolts and hardware
• Made from high quality 1-1/4 inch 1018 CR Solid Round Barstock
• Allows centering of rear axle when running a suspension lift
• 100% bolt on
• Rear track bar relocation bracket for lifts taller than 4.5 inch
• Made in the U.S.A
• California Residents: WARNING