Poison Spyder Body Armor Kits

From $295.99

• JK Body Armor is manufactured from either 3/16 inch high pressure steel plate or 3/16 inch 6061-T6 aluminum plate
• Available in Bare Steel or Black Powder Coat
• Spyder logo CNC cut into armor
• Bolt holes are countersunk in jeep rocker panel, and stainless steel flat head cap screws are supplied for a clean, flush-surface installation.
• Drilling of the body is required for installation on wrangler rocker panel.
• California Residents: WARNING

Poison Spyder Aluminum Hawse Fairleads

From $56.99

• Black powder coat
• For synthetic ropes
• CNC machined billet aluminum
• Works with most winches
• California Residents: WARNING

Poison Spyder Windshield Light Bar Mounts

From $249.99

• Available in black powder coat, bare steel and aluminum
• Attaches to a-pillar
• Made from 3/16 inch steel plate
• Includes rubber liners to avoid paint damage
• California Residents: WARNING

Poison Spyder DeFender XC High-Line Fenders

From $679.99

• Available in bare steel or aluminum
• 3” tapered flare
• Made from 3/16" steel plate
• Highline fender offers 3" of additional clearance
• Mounting location for a 3/4” LED marker
• California Residents: WARNING

Poison Spyder Recovery Straps

From $71.99

• 30 feet long by 3 inches wide*
• Industrial strength nylon webbing
• 24,250 lbs. minimum breaking strength**
• Reinforced, stitched loop protectors
• Thermofixed & treated for long wear
• Stretches up to 20% to absorb shock loads
• Laboratory tested for strength & quality
• California Residents: WARNING

Poison Spyder Rear License Plate Delete Covers

From $11.99

• Jeep License plate Delete Plug
• California Residents: WARNING

Poison Spyder LED License Plate and 3rd Brake Light Kits

From $49.99

• Mount a combination license plate and 3rd brake light to your license plate
• Bright light with low power draw
• Mounts to the two upper license plate bolts
• Electrical connectors are included
• Includes a short pigtail, suitable for use when the license plate is mounted at or near the stock location
• California Residents: WARNING

Retrax PowertraxPRO MX Retractable Tonneau Covers

From $2,149.99

• Retractable Tonneau Cover
• One Piece Polycarbonate Construction
• California Residents: WARNING

Poison Spyder Hood Logo Decals

From $59.99

• Available in black, silver, white or red
• California Residents: WARNING

Retrax PowertraxONE MX Retractable Tonneau Covers

From $2,053.00

• Retractable Tonneau Cover
• One Piece Polycarbonate Construction
• California Residents: WARNING

Poison Spyder Chrome Spyder Emblems

From $12.99

• Weatherproof and fade proof
• Automotive grade plastic
• Uses 3M weatherproof adhesive
• California Residents: WARNING

Poison Spyder RockBrawler Bumpers

From $579.99

• This bumper is fabricated from 3/16 inch plate steel, CNC laser-cut and precision brake-formed into a low profile, high clearance design.
• The ends of the bumper extend far enough to protect the lower corner of the grille, but not far enough to hinder tire clearance or tire access to vertical obstacles.
• The two D-ring shackle mounts are CNC-machined from 1 inch plate steel to provide brute strength for the most demanding recovery operations.
• Accepts most major manufacturer's winches up to 15,000 lbs. capacity
• Recessed light mounts are provided for retention of the factory fog lamps or aftermarket off-road lamps
• California Residents: WARNING

Poison Spyder Windshield Decals

From $59.99

• Available in black, silver, white or red
• California Residents: WARNING

Poison Spyder 3-Way Spare Tire Straps

From $79.99

• Designed for Poison Spyder tire carrier
• Ratchet strap design
• Built for rigorous wheeling
• California Residents: WARNING

Poison Spyder LED Tail and Reverse Lights with Wiring Harnesses Kits

From $149.99

• Exclusive Plug-N-Play Design
• Supports 4 Inch Round LED Tailights
• Supports 2 1/2 Inch Round LED Back-Up lamps
• Supports LED License Plate and Third Brake Light
• California Residents: WARNING

Poison Spyder Gear Bags

From $39.99

• Black
• Specifically designed for trunk area in JK Wrangler
• Dimensions 22 inch x 8.5 inch x 5 inch
• California Residents: WARNING

Poison Spyder Flashlight Holders

From $21.99

• Black
• Mounts to any roll cage tube or other suitable location
• California Residents: WARNING

Retrax RetraxPRO XR Tonneau Covers

From $2,099.00

Poison Spyder Crawler Skid Plates

From $299.99

• Bolts to bottom of Poison Spyder JK Crawler series Front Bumpers (sold separately)
• Covers factory "crash bar" and protects stock Jeep electrical swaybar disconnect mechanism
• CNC laser cut from 3/16" plate steel
• Precision brake-formed for a perfect fit
• SpyderShell™ Armor Coat semi-gloss black finish
• California Residents: WARNING

Poison Spyder LED Marker/Turn Signal Lamps

From $12.99

• 3/4" round
• LED
• 3 wire assembly
• Can be used as both a turn signal and a marker lamp simultaneously
• Includes pigtail harness and mounting grommet
• Sold individually

Retrax PowertraxPRO XR Tonneau Covers

From $2,799.00

• Compatible with most T-slot accessories from Rhino Rack, Yakima, Thule, and many more
• Increased Cargo Capacity Above & Below the Cover while maintaining functionality of the cover with loaded cargo
• Constructed from heavy-duty aluminum slats in a scratch-resistant matte finish that is engineered to retract without trapping dust, wear out or freeze
• The patented low-profile design incorporates a front cover that is flush with the truck bed cover, which streamlines the overall appearance and provides a firm, dependable seal to help to keep the truck bed dry
• Sealed ball-bearing rollers mounted onto the aluminum support beams allow the RetraxPRO XR truck bed cover to retract or close effortlessly without the use of springs or any kind of mechanism no moving parts to jam, freeze or fail

Retrax RetraxONE XR Retractable Tonneau Covers

From $1,519.00

• Compatible with most T-slot accessories from Rhino Rack, Yakima, Thule, and many more
• Increased Cargo Capacity Above & Below the Cover while maintaining functionality of the cover with loaded cargo
• Constructed from a one-piece sheet of polycarbonate that is engineered to retract without joints or hinges that can trap dust, wear out or freeze
• The patented low-profile design incorporates a front cover that is flush with the truck bed cover, which streamlines the overall appearance and provides a firm, dependable seal to help to keep the truck bed dry
• Sealed ball-bearing rollers mounted onto the aluminum support beams allow the RetraxONE XR truck bed cover to retract or close effortlessly without the use of springs or any kind of mechanism no moving parts to jam, freeze or fail

Retrax EQ Retractable Tonneau Covers

From $3,199.99

• Enhanced operation via OE vehicle key fob, Retrax phone app, or optional cab-mounted remote touchpad
• Dual helical cable drive system combined with glide tracks embedded in the rail channel for an incredibly smooth and quiet operation
• Shortest canister in the industry for maximum truck bed space
• Cargo rack-compatible with T-Slot channels built into the cover’s rails
• High output LED Light mounted into the rail for full truck bed illumination
• Heavy-duty aluminum rolling cover assembly built strong enough to support 500 lbs.
• Anti-Pinch and manual disconnect features for the ultimate in safety and security
• Industry leading 5-year warranty

Poison Spyder Crawler Rear Bumpers

From $789.99

• Compatible with Poison Spyder Frame Mounted Tire Carrier
• Large radius bends and die-formed features
• Integrated Class III Tow Hitch
• SpyderShell™ Armor Coat semi-gloss black finish
• Recessed mounts for LED backup lights
• California Residents: WARNING