Synergy Manufacturing Air Compressor Brackets

From $60.00

• Synergy Manufacturing Air Compressor Brackets easily bolt on mount to supply a spot to mount an onboard air compressor under the hood of your JK
• Works with VIAIR 100, 400, & 450 series compressors
• California Residents: WARNING

G2 Axle & Gear Solid Pinion Bearing Spacers

From $14.99

• These pinion bearing spacers are designed to replace your crush sleeve to prevent crush sleeve failure associated with high performance engines and oversize tires.
• California Residents: WARNING

Synergy Manufacturing Adjustable Steering Column

From $15.00

• Allows for easy adjustment of steering column
• Laser cut from 3/16 inch steel
• Made in the USA
• California Residents: WARNING

Synergy Manufacturing Heavy Duty Metal-on-Metal Tie Rod End

From $60.00

• Fully greasable sintered metal on metal bushing design
• Tie Rod end boot is made from silicone and polyurethane
• 7/8-18 UNF LH Thread
• Spring loaded bearing design keeps pressure on bearings
• Made in the U.S.A
• California Residents: WARNING

Synergy Manufacturing Limit Straps

From $25.00

• Limit Straps
• 8" up to 20" inch Lengths Hole to Hole
• Plated end fittings are made from tough 4130 steel and have 1/2" hole
• U.S. made 1.75" nylon webbing with a 7000 lb. rating and superior flexibility
• Quad wrap (ultra strength)
• Eyelets have an integrated deflector clip to minimize abrasion
• Sold individually
• Made in the USA
• California Residents: WARNING

G2 Axle Berfield CV Clip

From $1.79

• For Use With Factory And After Market Axle Shafts
• Retaines Axle Shaft To Berfiels Style CV Joint
• One Clip Only
• California Residents: WARNING

Synergy Manufacturing Radius Axle Link Brackets

From $1,000.00

• Synergy Manufacturing Radius Axle Link Brackets are designed to be used on an axle housing with a 3" diameter
• The link brackets are laser cut and CNC bent from 1/4" carbon steel
• The heavy duty 3 sided construction provides for a VERY rigid bracket and is designed to be used with any of our large rod ends with our high misalignment spacers & all of our rebuildable spherical bearing assemblies
• California Residents: WARNING

Synergy Manufacturing Front Long Arm Lower Control Arm

From $575.00

Synergy Manufacturing Rear Stretch Bracket Kit

From $1,480.00

• Synergy Manufacturing Rear Stretch Bracket Kit allows 2 Door JK's to be stretched with the Synergy 8 inch stretch kit while retaining the factory style coil spring and shock setup
• The Rear Stretch Bracket Kit Relocates upper coil spring mounts and upper shock mounts back 8 inches
• The Synergy Manufacturing Rear Stretch Bracket Kit is designed to be used in conjunction with Synergy 8032 rear 8 inch stretch brackets and long arms
• California Residents: WARNING

Synergy Lift Coil Springs

From $260.00

• Lift coil springs
• Synergy coils offer excellent off road performance while preserving ride quality
• Progressively wound
• keeps spring from coming unbound at suspension droop
• Progressively wound spring eliminates annoying spring clanking found on most suspension kits
• Feature frequency balanced and tuned spring rates to maximize suspension performance on and off road
• Suspension components feature an abrasive-resistant black powder coat finish for maximum durability and corrosion resistance
• Springs are designed to give the advertised amount of lift with use of aftermarket front bumpers & winches
• Sold in a pair
• California Residents: WARNING

Synergy Manufacturing Axle Trusses

From $200.00

• Open top for easy upper link installation
• Rigid, boxed design made from 3/16" laser cut steel plate
• Designed to be used for 4 link suspensions
• Fits most differentials, D35, 44, 60, Ford 8.8", 9.0" & Chevy 14 bolt housings
• Link mount brackets are angled at 50 degrees apart from each other
• California Residents: WARNING

Synergy Manufacturing Control Arm Cam Bolt Kit

From $45.00

• Synergy 9/16" Control Arm Cam Bolt Kit
• Cam bolts are manufactured from high carbon heat treated steel
• All included components are zinc plated for maximum corrosion resistance
• 100% bolt on components assures an easy, trouble free installation with the use of basic hand tools
• Cam bolt offers 1/2" adjustment in either direction
• The bolt will work on a mounting width of 2.25 - 3"
• California Residents: WARNING

Synergy Manufacturing Side Plate Mounting Kit (Arms Only)

From $75.00

• (2) Side Plate Mounting Arms only
• Jeep JK, 4 Door
• Made in the USA
• California Residents: WARNING

Synergy Manufacturing Rear Track Bar Brackets

From $100.00

• Bracket raises the vehicle's axle side track bar mount
• The vehicle's rollcenter is raised, reducing body roll and dramatically improving overall handling
• Special bolt on design strengthens the factory mount that is prone to failure
• Laser cut from 3/16" steel & 2 stage powdercoat finish for maximum strength and durability
• Suspension components feature an abrasive resistant powder coat finish for maximum durability and corrosion resistance
• California Residents: WARNING

Synergy Manufacturing Axle Bracket Kit

From $175.00

• Front and Rear applications
• Various mounts included
• Made in the USA
• California Residents: WARNING

Synergy Manufacturing Dodge Front Lower Control Arm

From $550.00

Synergy Manufacturing 2 Inch Front Bump Stop Spacer Kits

From $85.00

• Synergy Jeep JK, TJ, XJ, ZJ Front Bump Stop Spacer Kit
• Manufactured from high grade 6061 Billet Aluminum material
• Hard anodized finish eliminates oxidation that can occur under extreme elements
• Bump Stops fit inside front coils and provide 2", 3", and 4" of extra limitation for larger tires
• 100% bolt on components assures an easy, trouble free installation with the use of basic hand tools
• California Residents: WARNING

Synergy Manufacturing TRE Adapter

From $40.00

• Adapter is designed to flip the taper on the steering knuckle
• CNC machined from 303 stainless steel
• Sold Individually
• Made in the USA
• California Residents: WARNING

Synergy Manufacturing Bushings

From $30.00

• Bushing halves
• Bushing Kits
• Bushing Sleeves
• California Residents: WARNING

Synergy Manufacturing Front Track Bars

From $225.00

• Bent to clear most aftermarket differential covers
• Retains factory track bar mounting bolts and hardware
• Made from high quality 1-1/4 inch 1018 CR Solid Round Barstock
• Allows centering of front axle when running a suspension lift
• Features an abrasive resistant Powdercoat finish for maximum durability and corrosion resistance
• Made in the U.S.A
• California Residents: WARNING

Synergy Manufacturing Control Arm Bushing Outer Sleeve

From $30.00

• Control Arm Bushing Outer Sleeve
• Universal application
• Made of high strength steel
• Welding required
• Made in the USA
• California Residents: WARNING

Synergy Manufacturing Cam Bolt Eliminator Kits

From $110.00

• Designed To Take Place Of Cam Bolts Used On Stock Control Arm Mounts
• Desirable For Users Who Are Removing Cam Bolts And Upgrading To Adjustable Control Arms
• Laser Cut 3/16" High Strength Steel
• Zinc Plated For Maximum Corrosion Resistance
• Includes 4 Washers
• California Residents: WARNING

Synergy Manufacturing Dodge AAM 9-1/4 Inch Lower C-Gusset Kit

From $35.00

• Laser cut and CNC formed from high strength 3/16 inch steel
• Make in the USA
• California Residents: WARNING

Synergy Manufacturing Bracket Kit

From $200.00

• Easy installation
• 2.0 inch reservoir mounts sold separately
• Extended bracket measures 17 inch from bottom of bracket to center of bolt hole
• Made in the USA
• California Residents: WARNING