Fab Fours Ranch Winch Trays

From $189.99

• Universal to all Black Steel 1/2 ton bumpers
• 1/2 inch and 1/4 inch plate steel
• Pre-drilled for the WARN winch remote relocation kit (WARN part# 14867)
• California Residents: WARNING

Bilstein 7100 Series Shocks

From $106.00

• Monotube gas pressure construction
• Self-adjusting deflecting disc valving
• 2" diameter shock body
• High-flow piston reduces harshness
• Choice of valvings
• Schrader valve shocks with dividing piston
• 8", 10", 12", & 14" travel
• California Residents: WARNING

Fab Fours Elite Ranch Front Bumpers

From $1,919.99

• Combination Pipe and Smooth Plate Construction
• Matte Black Powder Coat or Bare Steel (-B instead of -1)
• Bolt-on tow hooks NOW included
• Light Mounts for Factory Fog Lights
• OE Styles ELITE Badge Included
• Optional Bolt-on Winch Mount (Accepts up to 16,500 lb. winches or smaller)
• Optional Bolt-on 1 inch D-ring mounts
• Optional Bolt-on 2 inch Receiver
• 100% Made in the USA
• California Residents: WARNING

Bilstein 9300 Black Hawk Series Shock Absorber

From $1,699.59

• One piece 6061 extruded aluminum body with hard anodized finish
• 30% faster heat dissipation
• 10% - 25% lighter than similar welded bypass steel shocks
• Up to 100 degrees cooler peak operating temperature
• 4 1/2 inch diameter aluminum reservoir with anti-cavitation valve (ACV)
• Bypass tubes allow for position sensitive damping adjustability
• Completely owner tunable and rebuildable
• California Residents: WARNING

Bilstein B8 Series SP Shock Absorber

From $123.00

• Monotube gas pressure construction
• Improved safety and sportiness
• Added traction and enhanced stability
• Increased durability and performance while maintaining ride comfort
• Road-tested and fine-tuned by BILSTEIN for each vehicle specific application
• California Residents: WARNING

Fab Fours Elite Hi-Flow Lower Guards

From $149.99

• Available in Bare steel or Powder coat
• Elite Hi-Flow Lower Guard
• For 3/4 And 1 Ton Trucks
• California Residents: WARNING

Fab Fours Replacement Rear Bumpers

From $1,049.99

• 3/16 inch Steel Construction
• D-Rings are cut with 3/4 inch steel and will accept up to a 7/8 inch Shackle
• Retain OEM Receiver Hitch and Wiring Location
• Fab Fours 2 Stage Black Powder Coat
• Weight: 115 lbs.
• U.S. Steel Construction
• 100% Made in the USA
• California Residents: WARNING

Fab Fours 2" Receiver Hitches

From $119.99

• Bolt-on application
• 2' receiver

Bilstein Performance Plus Series Shock Absorber

From $125.00

• 36mm, 46mm, monotube and twin tube available options
• BILSTEIN?s mono-tube technology is the number-one choice in motorsports and series-production sports cars: no other type gives engineers the same freedom to choose the perfect installation location or position
• BILSTEIN?s twin-tube absorbers, featuring OEM quality that has undergone rigorous testing, offer a marked improvement in driving characteristics with universal spare parts replaced in a timely and efficient manner
• California Residents: WARNING

Fab Fours Hi-Lift Jack Mounts

From $109.99

• Securely carries a Hi-Lift jack on the rear bumper
• 3/16 inch steel construction
• 100% Made in the USA
• California Residents: WARNING

Bilstein B4 OE Replacement Shock Absorbers

From $101.00

• Constant damping characteristics under any load
• Consistent performance and handling give the vehicle a "new car feel" every time
• Proven BILSTEIN gas pressure technology
• High OEM quality standards
• California Residents: WARNING

Bilstein B3 OE Replacement Air Bags

From $240.00

• Air Bag
• Finish: Black
• California Residents: WARNING

Bilstein OE Replacement Air Series Shock Absorber

From $1,019.00

• High OEM quality standards
• Proven BILSTEIN gas pressure technology
• Responds to street and vehicle conditions in milliseconds for instant adaptivity
• Provides excellent comfort and perfect driving characteristics
• Manufactured with 100% new parts for maximum reliability and safety
• California Residents: WARNING

Bilstein 9100 Series Bump Stop

From $267.00

• Thick-walled Monotube design
• Seamless steel & electroless nickel finished body
• Universal frame bracket fitment (2 inch O.D.)
• 1-1/4 inch hardended chrome steel shaft
• Nitrogen adjustable spring rate capability
• California Residents: WARNING

Fab Fours Steel Lite Guard

From $199.99

• Steel Lite Guard
• Powder coat or Bare Steel
• For 3/4 And 1 Ton Trucks
• California Residents: WARNING

Bilstein AK Series Shocks

From $105.80

• AK Series shock absorbers
• Designed for motorsports applications that require the use of the OE mounting components
• Monotube design with steel spring valve discs for consistent, fade free performance and superior durability
• AK Series shock absorbers are ideal for racers who demand reliable performance that also meets their sanctioning body's mounting requirements
• California Residents: WARNING

Bilstein 9100 Series Coilover Shock Absorber

From $567.99

• Monotube gas pressure construction
• Designed to combine the function of damper and spring
• 2.0 inch or 2.65 inch (OD) Body
• Coil Spring Hardware: 3 inch or 3-5/8 inch (ID)
• Hose Length and Fittings Options: Straight, 90 degree, 45 degree
• Valving can be adjusted internally for rebound and compression
• Completely owner rebuildable
• California Residents: WARNING

Bilstein 9100 Smooth Body Series Shock Absorber

From $407.99

• Monotube gas pressure construction
• 2.0 inch or 2.65 inch (OD) body
• Hose length and fittings options: straight, 90 degree, 45 degree
• Valving can be adjusted internally for rebound and compression
• Completely owner rebuildable
• California Residents: WARNING

Bilstein 9100 Series Shocks

From $1,030.99

• For Smooth Body
• Monotube gas pressure construction
• 2.0" or 2.65"(OD) body
• Hose length and fittings options: straight, 90 degree, 45 degree
• Valving can be adjusted internally for rebound and compression
• Completely owner rebuildable For Coilover:
• Monotube gas pressure construction
• Designed to combine the function of damper and spring
• 2.0" or 2.65 (OD) Body
• Coil Spring Hardware: 3" or 3-5/8" (ID)
• Hose Length and Fittings Options: Straight, 90 degree, 45 degree
• Valving can be adjusted internally for rebound and compression
• Completely owner rebuildable
• Special Notes:BILSTEIN does not manufacture or sell coil springs for off-road use. However, most BILSTEIN off-road retailers sell springs. They can also offer advice on spring rates
• It is not recommended to use a coilover in conjunction with an auxiliary spring source, such as Leaf Springs or Torsion Bars. For Bypass:
• Widest range of tuning combinations within the industry
• Available in 2.0” or 2.65” body
• Completely owner tunable and rebuildable
• Available in piggyback and various hose lengths
• Bypass tubes allow for position sensitive damping adjustability - custom bypass layouts available
• Special Notes:External Bypass dampers require an external spring source such as a coilover, leaf spring, torsion bar, or auxiliary coil. These dampers will not support a vehicle. For Rock Crawler:
• Monotube gas pressure construction
• Nickel plated 2" diameter threaded body
• 2.5" x 12" reservoir with -8 aeroquip match mate hose
• Hard anodized screw top and aurora spherical bearings
• Valved specifically for rock crawling
• Optional coilover setup with dual rate spring
• Available in 12", 14" and 17" travel
• Completely owner rebuildable
• California Residents: WARNING

Bilstein 9100 Rock Crawler Series

From $399.99

• Monotube gas pressure construction
• Nickel plated 2 inch diameter threaded body
• 2.5 inch x 12 inch reservoir with -8 aeroquip match mate hose
• Hard anodized screw top and aurora spherical bearings
• Valved specifically for rock crawling
• Optional coilover setup with dual rate spring
• Available in 12 inch, 14 inch and 17 inch travel
• Completely owner rebuildable
• California Residents: WARNING

Bilstein B4 OE Replacement Air Springs

From $1,078.00

• Air Spring with Monotube Shock Absorber
• California Residents: WARNING

Bilstein OE Replacement DampTronic Series Shock Absorber

From $220.00

• Electronic adjustment system developed specifically for each application
• Adjustable setting levels for the most dynamic driving experience
• Ability to switch instantly between settings to suit driving conditions
• Threaded body adjustable range of 20mm at both axles, while installed
• Lowering of approx. 30-50 mm at front and rear
• Road-tested and fine-tuned by BILSTEIN ride engineers, under extreme motorsports conditions
• Spring plates and lock nuts made from a special aluminium alloy
• Surface coating using Triple-C-Technology® for long-lasting corrosion resistance
• Round threads for easy adjustment
• Quality sport springs made from highly durable material
• Gas pressure technology
• BILSTEIN monotube technology, made in Germany
• California Residents: WARNING

Bilstein PSS Suspension Kit

From $1,070.00

• The Bilstein B14 PSS kit features both coilover and standard monotube gas shocks with performance-level valving, with application specific, progressive rate coil springs
• The solid aluminum spring seat and lock nut allows for precise adjustment of the vehicle's lowered ride height from 30mm to 50mm
• Bilstein's patented Triple-C-Technology coating ensures long-lasting resistance to corrosion
• This kit is ideal for the driver looking to set a car's ride height for both looks and improved handling
• California Residents: WARNING

Bilstein B4 OE Replacement Strut Assembly

From $101.00