Reviews: Smittybilt 2.5 Gallon Air Tank - 99210-2

I mounted it where my muffler used to be, its up high and out of the way with easy access, my muffler is now under the drivers seat and obviously an aftermarket muffler, fills my 35's from 18 psi to 38 psi no problem, its connected to a smittybilt compressor that's under my hood

Works well for my application & I didn’t find any quality issues.

I use this tank to run my train horns and as an air source for lots of things. It is small enough that I was able to mount it in the back of my Jeep.

This tank is a great deal! It's less than what the competitors are offering and it comes with a great deal more. Mine included several accessories that I would have purchased for my OBA setup anyway. For anyone putting an OBA system in their ride, I highly recommended this tank.

On the trail to air up tires or possibly air tools if needed. Also have an on board compressor. Price was excellent for the size and really like the port locations. My only negetive at this point is the carrying handle but can removed with a little cutting and grinding.

The tank ships with four metric mounting bolts for use in the pre-drilled holes in the feet. All of the ports on the tank are 1/4" NPT threads. There are holes located; in the belly underneath, one in each end, one in the top offset between the handle and one end, and one offset partway below the top fitting. Included is a pressure guage with two push to connect fittings and 20' of small 4mm hose to connect it. There are four 10mm push to connect fittings and 20' of 10mm tube. Also included is a 90deg elbow M-F, pressure relieve valve, female quick connect fitting w/ 1/4" NPT female threads, a roll of teflon tape, a drain valve, and a bracket for the pressure gauge. Note that the drain valve which is meant to screw into the belly port of the tank is tall enough that it has interference with a flat surface when mounting or perhaps setting on the ground or a table. The feet of the tank are not high enough for it to have enough space, which makes reaching the drain valve potentially more tricky. There are no Tee connectors in the kit, so every port will be used if every fitting is used. The kit does come with two plugs should you choose not to use everything that is included. Overall this seems to be a great value. The cost of all these fittings and tubing when priced seperately would add up to the cost of the whole kit. The one I ordered arrived with the top handle bent due to shipping/packing issues but the damage is minor enough that I wasn't interested in a replacement.