Reviews: Pro Comp Rear Add-A-Leaf Set - 13120

I've got an old AMC Pacer that I like to take camping and needed to beef up the old sagging leaf springs. These worked great and gave about 2-2.5" of lift to boot. Easy to install, arrived quickly.

Love the ride. 300k miles on truck so it needed to tighten up some. I added 2½" bilstein lift shocks on front and back is 1" higher again. Perfect. Cut the bolts off some before you start so they'll work under springs easier.

Installed this on my 1977 Datsun pickup bed off-road trailer. Installation went well, about 2'' lift.

Great service! Started with an add-a-leaf, but it wasn’t adequate enough to correct the sag on the rear suspension. Went with a suggested full aftermarket leaf spring kit. Corrected the issue and it rides better too.

worked great on my 95 toyota pickup. gave me about 2.5” of lift in the rear.

GREAT PRODUCT & PRICE! CAME WITH 2 SETS OF LEAF HARDWARE JUST IN CASE

Worked great on my 1985 XJ. Got about 2-2.5 inches of lift.

Good quality AAL. Came with 2 sets of screws. Don’t cut screws to desire length prior to installation. It makes aligning the holes a little harder, but is still doable.

Used on my 2wd yota pickup. they went in easily without a hitch... once i figured out how to actually disassemble my leaf pack that is.

I added this to my 1987 Toyota 4x4 Customcab as it was sagging in the rear from the extra weight of the customcab conversion and a camper shell. Installed easily in about an hour. Raised the rear about 1 3/4" after it settled in. Ride quality seems to have improved, perhaps by reducing bottoming out. Cheap, effective, easy to install, no reduction in ride quality(my rig is heavier than most Toyotas) what more can one want?

Needed something to help my sagging rear springs. Very simple to install and received more lift than advertised but not so much to be excessive

Easy to install. Make sure your U-bolts are long enough. They should have 1/2 to 3/4 inch of thread exposed after the install. I had to buy new U-bolts as mine only had 3/4" before the install. Added 2" of lift and a little firmer ride. I like it!

These were EXACTLY what I was looking for. Talking to friends and acquaintances who like working on their rigs, I kept hearing 'go to the wrecking yard and buy a set of leaf springs and pull out the leaves you want' Using these add-a-leafs was simple, raised the truck height and capacity right where I wanted it and didn't leave me with parts that I would have to take to the recycler to dispose of. Having the crew behind the counter with their knowledge and ability to discuss the product made the selection that much easier.