Reviews: Bushwacker Flat Style Fender Flare Set (Black) - 10918-07

Definitely a pain in the butt to install but not as bad as some of the reviews make it out to be. Lining up the actual fender to the bracket takes the longest. Spend time prepping parts and it’s straight forward.

The install is not bad but the speed clips do like to move when you slide the fender onto the mounts. This makes finding the holes a real challenge at times. I tried crimping them in place but they still moved. I found using a very thin, micro thin, needle nose plier could be shoved into the fender hole to fish the speed clip back into place. Once you get that figured out everything else is not terrible. I started trimming the inner fender with my Dremel but found my oscillating tool(pictured) to cut them much better. It made light work of that part of the job. I love the way they turned out and I'm very happy with the look.

Great fit and easy straight forward installation. The finish on flares is perfect. The flares are plenty wide enough to keep the cops from bothering me. They keep most of the mud and road filth off my Jeep

Install takes time to get everything right but perfect look that I was expecting.

Paper instructions are tough in black and white so look at a video just in case

We needed a solution for more wheel space without using a lift kit. The Bushwacker fenders were perfect in solving our challenge. The install was a little lengthy and I learned a few tricks along the way. They look great and perform extremely well!

Love the fenders and they look great on the jeep. The install was not so smooth. Aligning the fender screw holes over the mounting pieces was not easy. I used cardboard pieces behind the speed nuts to keep them in place but it was still difficult to get the holes to line up. I did the driver side first. On the passenger side I put the mounting pieces into the fenders to check the alignment of the holes and they lined up. Still wasn’t easy but the passenger side did go better. On my 2014 JKUR I did not have the factory retainer / nut for the inner shield. Wound up getting one from the dealership for an outrageous $10. Also had to drill a hole for it since there was not a hole in the shield. The bolt was there so it worked out in the end. Be patient, take your time, you will eventually holes to line up and fenders will look great!

Great look and overall fit. A couple issues... Lining up the clips for the screws is a pain in the ass. Second, the package had the wrong parts so I'm waiting on a response to be able to put the back set on. After figuring out the first one, the others fly right on. If you are a picture person when it comes to directions, have fun because these are hard to make out.

I needed some fender flares. Did my research. Read reviews. Ordered flares and planned time for install. Installation was easy for everything except the actual flares. Bushwacker should fire who ever designed these and who ever let them come to market with this flaw. When you go to put the flares on none (And I Mean NONE) of the holes line up to attach the flares to the brackets. My opinion is they did this brilliant engineering without the weather stripping on, so when you put it on all the holes are pushed out too far. Once you figure this out you have to have a sharp awl to push up through the back of the hole and you can finish the installation. Other than that, pretty nice product. Love the look.

This not a quick install if u intend to reuse the stock liners. I watched a good youtube video that was very thorough. Some of the bushwhacker mounts had to be shaved down bc the weren't straight and wouldn't fit flush. Give yourself some time and don't rush and the results will be great. I am definitely happy with the result.

These fender flares look great and shipping was super fast!! The install was okay if you know what you are doing but all the parts needed some type of clean up or tweeking before install. The pictures on the instructions were garbage and no help at all those could be fixed for sure. All in all they seem like a great product but I still need to test them off-road. Thanks.

Love the look and fit but save yourself some time and buy some grade 8 bolts to replace what comes with these. Four bolts had such bad threads they stripped and had to be cut off. I was only using hand tools so force was not the issue.

I would like to know if fenders can be purchased seperately in case one or more are damaged.

I used these flat flares to gain extra clearance under my Wrangler and to give it more aggressive styling

Looks great gives you clearance for larger tires. Was a pain to install very tedious. Holes didn't line up that great had to punch my own holes in a few. They don't wiggle a bit and seems durable.