Rough Country Control Arms

From $199.95

• Flex joints
• Hardware
• Fully greasable
• Upper joints pivot up to 20 degrees
• Lower joints pivot up to 35 degrees
• Allows for greater articulation off-road

Rough Country Leaf Springs

From $209.95

• Easy bolt-on installation
• Sold individually

Rough Country Performance Struts

From $329.95

• Application specific velocity sensitive valving
• Utilizes OEM coil spring
• Maintains smooth, factory-like ride
• Structurally engineered for lifted applications
• Lifted, eliminating the need for strut spacers
• Nitrogen gas charged to improve ride, handling, and reduce shock oil aeration
• Offers improved tire contact with the road for increased stability and performance
• Infinitely Variable Damping
• Leak-proof piston seal
• Special formulated low friction shock oil
• Massive 1 3/8in bore
• Hardened chromed piston rod provides superior corrosion resistance and enhances sealing properties
• 3-year limited warranty
• Black powder coat finish
• Sold as a pair

Rough Country M1 Monotube Shocks

From $159.95

• Rough Country M1 Monotube Shocks

Rough Country Steering Stabilizers

From $114.95

• Single or dual stabilizers available
• Easy bolt-on installation
• Improves control and handling
• Reduces bump steer
• Reduces tie rod and ball joint wear and tear
• Chrome hardened 18mm piston rod

Rough Country Air Spring Kits

From $299.95

• Easy to install
• Minor drilling required
• Does NOT increase towing capacity
• Durable powder coat steel brackets
• Push to connect air fittings
• Internal bump stop in air bag
• Double convoluted air bag
• Complete kit
• Levels truck when towing for safer load carrying
• Includes DOT approved air line
• To ensure that the correct air spring spacer is supplied please measure between the bump stop landing pad and the upper bump stop mount to confirm your rear measurement range as specified on the drop-down window before purchase

Rough Country N3 Shocks

From $199.95

• 10-stage variable valving
• High pressure nitrogen charged
• 35mm piston
• Chromed hardened 18mm piston rod
• 54mm shock body to dissipate heat faster
• 36kN tensile strength
• Spring loaded piston rod seal
• Military spec. fluid rated to –40° C
• Rubber bushings for better absorption
• Metallic silver paint
• 3-year manufacturer's warranty

Rough Country Lowering Kits

From $249.95

• Front lowering spacers
• Front cam plates
• Grade 9 hardware
• Rear spring hanger brackets
• Axle saddles
• U-bolt plates
• U-bolts
• Hardware
• (2) Premium N3 series rear shocks
• Easy bolt-on installation
• Drops the front 2-inches and the rear 4-inches for a level drop
• Rear drop is adjustable between 4in and 4.5in
• Maintains factory ride quality
• Can be returned to stock height
• Includes Grade 9 hardware and hardened washer

Rough Country V2 Monotube Shocks

From $249.95

• Incredible ride quality and performance
• Monotube design
• Internal floating piston
• Nitrogen-charged
• 46mm high-flow piston
• Fast heat dissipation
• 36kN tensile strength
• Mounts inverted
• T6061 brushed aluminum body
• 3-year manufacturer's warranty
• Sold as a pair

Synergy Manufacturing Steering Stabilizer Clamps

From $25.00

Rough Country U-Bolt Kits

From $39.95

• Available in a variety of sizes and styles
• Replacement or custom fitting
• All bolts are e-coated black
• Corrosion resistant

Rough Country Body Lift Kits

From $109.95

• Easy bolt-on installation
• Increased ground clearance
• No exhaust modifications required
• Includes grade 8 hardware
• Body lift pucks are made from fiberglass reinforced nylon for superior strength and durability

Rough Country Bump Stops

From $29.95

• Prevents suspension from dipping to lowest point
• Less turbulent, more comfortable ride
• Prevents damage to undercarriage
• Controls final 3-inches of travel
• Carburized Alloy Housing
• Threaded design
• Rebuildable

Rough Country Long Arm Kits

From $1,249.95

Rough Country Radius Arms

From $449.95

• 100% bolt-on installation
• Equipped with durable Clevite Rubber Bushings for maximum vibration absorption
• Help maintain factory angles when used with 4-6in lift kits
• Includes adjustable alignment cam at the axle to allow caster adjustment
• Sold as a pair

Rough Country Crossmember Kicker Braces

From $109.95

• Easy bolt-on installation
• Increases off-road stability
• Adds rigidity to the front crossmember assembly

Synergy Manufacturing Rear Track Bars

From $225.00

• Bent to clear most aftermarket differential covers
• Retains factory track bar mounting bolts and hardware
• Made from high quality 1-1/4 inch 1018 CR Solid Round Barstock
• Allows centering of rear axle when running a suspension lift
• 100% bolt on
• Rear track bar relocation bracket for lifts taller than 4.5 inch
• Made in the U.S.A
• California Residents: WARNING

Synergy Manufacturing Limit Straps

From $25.00

• Limit Straps
• 8" up to 20" inch Lengths Hole to Hole
• Plated end fittings are made from tough 4130 steel and have 1/2" hole
• U.S. made 1.75" nylon webbing with a 7000 lb. rating and superior flexibility
• Quad wrap (ultra strength)
• Eyelets have an integrated deflector clip to minimize abrasion
• Sold individually
• Made in the USA
• California Residents: WARNING

Synergy Manufacturing 2 Inch Front Bump Stop Spacer Kits

From $85.00

• Synergy Jeep JK, TJ, XJ, ZJ Front Bump Stop Spacer Kit
• Manufactured from high grade 6061 Billet Aluminum material
• Hard anodized finish eliminates oxidation that can occur under extreme elements
• Bump Stops fit inside front coils and provide 2", 3", and 4" of extra limitation for larger tires
• 100% bolt on components assures an easy, trouble free installation with the use of basic hand tools
• California Residents: WARNING

Synergy Manufacturing Control Arm Bushing Outer Sleeve

From $30.00

• Control Arm Bushing Outer Sleeve
• Universal application
• Made of high strength steel
• Welding required
• Made in the USA
• California Residents: WARNING

Synergy Manufacturing Heavy-Duty Replacement Transmission Cross Member

From $315.00

• 3.6L and 3.8L gas engines with either automatic or manual transmissions
• Laser cut and CNC formed from 3/16 inch crush resistant Grade 50 A-572 steel plate
• Fully boxed construction with internal gusseting provides maximum strength where it counts
• Compatible with stock and most aftermarket skid plates
• Made in the U.S.A
• California Residents: WARNING

Synergy Manufacturing Control Arm Kit with Fixed Length Lower Control Arms

From $1,520.00

Synergy Manufacturing HD E-Coated U-Bolt for 3.50 Inch Axle Tubes

From $25.00

• Axle U-Bolt Kit
• California Residents: WARNING

Synergy Ball Joint Dust Boots

From $10.00

• Synergy Manufacturing products & systems have been designed by real engineers with 10+ years of suspension design & experience in the off road industry. All Synergy products are designed with the use of the latest CAD engineering software to ensure the highest level of fit, finish, and performance.
• California Residents: WARNING