King Shocks 2.5 OEM Performance Series Remote Reservoir Coilover Front Shock Absorbers - 25001-119

• Fitment: Direct Fit
• Designed for the best ride at 2" of lift
• Extended Length: 21.687 inch
• Collapsed Length: 16.750 inch
• Travel Length: 4.937 inch
• Finish Color: Blue
• Lug Pattern: 6 Lug Only
• Bolt-On Installation
• Sold as: Pair
• California Residents: WARNING
+ View More Specs - View Less Specs

King Shocks 2.5 OEM Performance Series - Rear - Remote Reservoir Shock Absorber for 3 - 5" Lifts with Adjuster - 25001-224A

• Fitment: Direct Fit
• 07-18 Wrangler JK, 2 & 4 Door
• With 3-5 inch lift kits
• Rear shocks
• Simple bolt on installation
• Large diameter micro-polished shafts
• Aeroquip high presure hoses on remote reservoirs
• 6063 aluminum alloy reservoirs dissipate heat
• Sold as a pair
• California Residents: WARNING
+ View More Specs - View Less Specs

King Shocks 2.5 OEM Performance Series - Front - Remote Reservoir Shock Absorber - 25001-136

• Fitment: Direct Fit
• Ford F-250/F-350 Super Duty 4WD models
• Lightweight hard anodized 6063 aluminum alloy reservoirs dissipate heat quickly and will not rust due to gas charging contamination. High quality fittings are mated to Aeroquip high pressure hoses which resist abrasion and kinking (where applicable)
• Internally threaded top cap design threads over the shock body to enable maximum piston travel inside the shock body
• 2.5" Shock cylinders are precision bored to within +/- .001, then honed after cadmium plating to remove buildup for a tight piston seal and optimum valving function
• The heat treated 6061 aluminum alloy piston has our highly developed port configurations that contribute to the unique damping performance and famous King ride quality
• Wear bands are made from a Rulon composite that offers incredible wear resistance, low deformation under load and high compressive strength. Overlapping end design enhances sealing
• Large 3/4" or 7/8" diameter shafts have a minimum tensile strength of 100,000 pounds per square inch. They are hard chromed and micro-polished to a 6 RA finish for extended seal life
• High strength rod end designed for proper clearance on your application. Steel Teflon lined spherical bearings for smooth articulation and long life with no metal to metal contact
• Aluminum components and vehicle specific mounts are machined from aircraft quality billet. Front and rear kits all include all necessary vehicle specific mounting brackets and hardware along with detailed installation instructions.
• Sold as a pair
• California Residents: WARNING
+ View More Specs - View Less Specs

King Shocks 2.5 OEM Performance Series - Rear - Piggyback Reservoir Shock Absorber - 25001-154

• Fitment: Direct Fit
• OEM Performance Series Rear Shocks
• Piggyback Reservoir
• Max Tire Size: 33 inch
• Sold as: Pair
• Built to perform with longevity
• Strong and durable for extreme conditions
• Easily rebuilt and serviced
• Optional adjusters allow user customization
• Delivered with vehicle specific tuning
• Bolt on replacement for popular trucks, SUVs, and UTVs
• California Residents: WARNING
+ View More Specs - View Less Specs

King Shocks 2.5 Shorty Bump Stop - BS2525

• Fitment: Universal Fit
• 2.5 x 2.5" bump stop
• Double sealed Schrader cover
• 4130 Chromoly mounting sleeves
• Unique mounting boss design with indexing pin securely locates the bump stop without pinching the outside of the tube
• Large 1-1/4" or 1-5/8" diameter shafts have a minimum tensile strength of 75,000 pounds per square inch
• Aluminum components are machined from aircraft quality billet
• O-ring on shaft helps to gauge shaft travel
• Mounts with a simple yet effective single bolt design
• California Residents: WARNING
+ View More Specs - View Less Specs

King Shocks 2.0 OEM Performance Series Front Steering Stabilizer - 20001-152

• Fitment: Direct Fit
• 07-18 Wranger JK, 2 & 4 Door
• Stabilizer bodies are bored and honed after cadmium plating to ensure cylindricity and an efficient piston seal that enhances valve function
• Highly developed "balanced flow" port designs on our 6061 aluminum alloy piston provide superior damping
• Heat treated stainless alloy valve shims do not fracture like plain carbon steel and resist deformation at high temperatures providing consistent fade free performance
• Wear bands are made from a Rulon composite that offers incredible wear resistance, low deformation under load and high compressive strength. Overlapping end design enhances sealing
• Special long wearing urethane seals have been tested on 18 wheelers for 450,000 miles without a failure
• Large 3/4" or 7/8" diameter shafts, depending on the stabilizer length, have a tensile strength of 100,000 pounds per square inch. They are hard chromed to combat rock bruising and micro-polished to a 6 RA finish for extended seal life
• Replaceable Teflon lined stainless steel spherical bearings will not rust and provide smooth articulation with no metal to metal contact.
• California Residents: WARNING
+ View More Specs - View Less Specs

King Shocks 3 x 14" 550Lbs Coil Spring for Coilover Shock - SPR3-14-550

• Fitment: Universal Fit
• 3" Inside diameter
• 14" Length
• 550 lbs spring rate
• Coils are closed and ground to sit flat
• High tensile chrome silicon wire
• Wound for off-road applications
• Made in the USA
• California Residents: WARNING
+ View More Specs - View Less Specs

Pro Series Cargo Carrier - 63153

• Fitment: Universal Fit
• Cargo Carrier
• Bolt Together
• 500 lbs. Capacity
• California Residents: WARNING

King Shocks 2.5 x 14" 200Lbs Coil Spring for Coilover Shock - SPR25-14-200

• Fitment: Universal Fit
• 2.5" Inside diameter
• 14" Length
• 200 lbs spring rate
• Coils are closed and ground to sit flat
• High tensile chrome silicon wire
• Wound for off-road applications
• Made in the USA
• California Residents: WARNING
+ View More Specs - View Less Specs

King Shocks Shock Spherical Bearing - B1058

• Fitment: Universal Fit
• Sold individually
• Com 10T Bearing
• California Residents: WARNING

King Shocks 3 x 14" 600Lbs Coil Spring for Coilover Shock - SPR3-14-600

• Fitment: Universal Fit
• 3" Inside diameter
• 14" Length
• 600 lbs spring rate
• Coils are closed and ground to sit flat
• High tensile chrome silicon wire
• Wound for off-road applications
• Made in the USA
• California Residents: WARNING
+ View More Specs - View Less Specs

Pro Series Pod Brake Control - 80500

• Fitment: Universal Fit
• Pod Brake Control
• Use w/1 Or 2 Axle Trailers
• Timed Actuated
• California Residents: WARNING

King Shocks 2.5 PR Bearing Spacer - 25039-003

• Fitment: Universal Fit
• 12MM x 1.537
• OEM replacement
• California Residents: WARNING

Pro Series Cargo Carrier - 63155

• Fitment: Universal Fit
• Cargo Carrier
• Bolt Together
• 300 lbs. capacity
• California Residents: WARNING

Pro Series Weight Distributing Shank - 63911

• Fitment: Universal Fit
• Weight Distributing Shank
• 12000 lbs. GTW
• 1200 lbs. TW
• Black
• California Residents: WARNING
+ View More Specs - View Less Specs

Pro Series Weight Distributing Shank - 63971