Dana Spicer Pinion Shim Kit

From $4.99

• Pinion Shim Kit
• Used for adjusting ring and pinion pattern
• Setting bearing preload
• OEM Factory Style Part
• California Residents: WARNING

Dana Spicer Axle King Pin Spring Retainer

From $2.99

• Prevents Damage To King Pin Bushing
• Single Side Only
• California Residents: WARNING

Dana Spicer Drive Shaft Slip Yokes

From $104.99

• Mid Axle Shaft Slip Yoke
• Front
• High quality O.E replacement
• Available for most popular factory applications
• Same as what came in your vehicle from the factory so there is no question of poor fitment
• California Residents: WARNING

Dana Spicer Dana 30 Stub Axle Slinger

From $3.99

• Dana Spicer Dana 30 Stub Axle Slinger fits all 30 and 35 spline factory and aftermarket stub axles
• The Dana 30 stub axle slinger prevents damage to spindle seals
• The Dana Spicer Dana 30 Stub Axle Slinger is designed to sling mud and muck away from the axle seals
• California Residents: WARNING

Dana Spicer Axle Disconnect Inner Bushing

From $28.99

• Dana 30
• Disconnect models
• Non-ABS models
• Installs at intermediate shaft
• California Residents: WARNING

Dana Spicer Dana 60 Inner Pinion Bearing Baffle

From $3.99

• Dana Spicer Dana 60 Inner Pinion Bearing Baffle is for use in all high pinion Dana 60 axles
• The Inner Pinion Bearing Baffle installs behind the inner pinion bearing race with shim pack
• The Dana Spicer Dana 60 Inner Pinion Bearing Baffle allows oil to pool to insure lubrication for the outer pinion bearings
• California Residents: WARNING

Dana Spicer V-Ring Seals

From $6.99

• Large V-Ring Seal
• Dana 30
• Outer
• Face Seal
• Rubber
• California Residents: WARNING

Dana Spicer Axle Locker Sensor

From $75.99

• Tells you if your locker is fully engaged
• California Residents: WARNING

Dana Spicer Axle Disconnect Shift Fork Clips

From $16.99

• Disconnect Shift Fork Clip
• Fits All Dana 30, 44 and 60 Front Axles
• California Residents: WARNING

Dana Spicer Spicer Ultra Premium Synthetic Grease

From $31.99

Dana Spicer Dana 44 Locking Ring

From $2.99

• Dana 30/44/GM 10 Bolt Spindle Nut
• Locking Ring
• Services One Side Only
• California Residents: WARNING

Dana Spicer Performance Adjustable Shocks

From $1,018.99

• Mounting Location: Front
• External Reservoir
• 16 position adjustability
• Hand built by Walker Evans
• Includes billet aluminum remote reservoir brackets
• Sold As: Each
• Made in the U.S.A
• California Residents: WARNING

Dana Spicer Dana 30 Open Differential Carrier Case

From $122.99

• O.E. Quality, fit and finish
• Dana 30
• For use with 3.73 & up gears
• Open differential
• Case only
• Internals sold separately
• California Residents: WARNING

Dana Spicer Dana 35 Pinion Seal Slinger

From $15.99

• The Dana 35 Pinion Head Slinger installs between the outer pinion bearing and pinion seal
• The Pinion Head Slinger prevents oil spray and flooding of the pinion seal
• The Dana Spicer Dana 35 Pinion Seal Slinger is designed to limit the amount of oil that makes way to the pinion seal to help prevent pinion seal leaks
• California Residents: WARNING

Dana Spicer Pinion Bearings

From $36.99

• Includes 1 bearing and 1 cup. Fits XJ Cherokee, 1985-00 with nondisconnect axle and 1984-91 with disconnect axle.
• California Residents: WARNING

Dana Spicer Differential Cover Bolt

From $2.99

• For use with M30, M35, M20 AND M44 Front Axles. *Will not fit Dana 60 or 70 axles. Not shown in diagram.
• California Residents: WARNING

Dana Spicer Differential Thrust Washer

From $0.99

• Quantity 2 required. *If customer bought the side gear set they do not need to purchase this because it comes with it.
• California Residents: WARNING

Dana Spicer Carrier Shim Kit

From $8.99

• Dana Spicer Differential shim kit is used for adjusting ring and pinion pattern as well as setting bearing preload.
• California Residents: WARNING

Dana Spicer Dana 30 JK Open Differential Assembly

From $207.99

Dana Spicer Dana 35 Open Differential Assembly

From $181.99

Dana Spicer Dana 60 4.10 Ratio Ring and Pinions

From $778.99

• All Dana Spicer ring gear and pinion sets are designed and tested to meet original equipment specifications
• Spicer gearing is manufactured with a special grade of steel, machined and heat-treated to precision, so you can count on optimum set-up and mating of the gears
• Dana Spicer has conducted aggressive dynamometer tests to ensure exceptional performance of all of their genuine Spicer gearing
• California Residents: WARNING

Dana Spicer Dana 60 4.56 Ratio Ring and Pinions

From $391.99

• All Dana Spicer ring gear and pinion sets are designed and tested to meet original equipment specifications
• Spicer gearing is manufactured with a special grade of steel, machined and heat-treated to precision, so you can count on optimum set-up and mating of the gears
• Dana Spicer has conducted aggressive dynamometer tests to ensure exceptional performance of all of their genuine Spicer gearing
• California Residents: WARNING

Dana Spicer 1350 Series U-Joint

From $37.99

• 1350 Series, OSR, outside snap ring dim. 3.625, cap dia. 1.188
• California Residents: WARNING

Dana Spicer Dana 30 4.10 Ratio Ring and Pinions

From $285.99

• All Dana Spicer ring gear and pinion sets are designed and tested to meet original equipment specifications.
• Spicer gearing is manufactured with a special grade of steel, machined and heat-treated to precision, so you can count on optimum set-up and mating of the gears.
• Dana Spicer has conducted aggressive dynamometer tests to ensure exceptional performance of all of their genuine Spicer gearing.
• California Residents: WARNING