Reviews: Smittybilt XRC Armor Rock Guards

works great helps with getting in the rig..

I've bashed these rockers off plenty of rocks and the powdercoating has held up exceptionally well and has saved my Jeep from a lot of body damage! Not to mention, they give the Jeep a finished look and make it easier to get in and out of a lifted TJ!

Awesome rock sliders great for idaho's desert rocks and idaho's great mountain trails. Easy installation and helpful information.

Got the sliders in like 2 days, bax was rippedopen but the sliders were in great shape. Their pretty decent sliders. the plate is stout enough, i bent the first set i bought after acouple years, i neat on them pretty good, careful in the my girl years back, knocked herself out when they were iced over.

This is a great product i installed on my 1992 jeep wrangler ! They look and work like nobody's Business ! Love them

Excellent product would definitely buy again and can’t beat the price

These Smittybuilt rock guards hold up to the toughest of trails. Installed them myself in a few hours. Looks great on my TJ.

These rock sliders are awsome. For the money they can't be beat. You have to be prepared to drill through the outside and inside of jeep body. A lot of work putting on a JK jeep, but worth the trouble. Excellent looks and protection!!!!

This is a great addition to my XRC Fenders, They send you all the parts to run them with or with out their fenders, it does not interfere with my factory steps and looks great with the rest of my armor

4 Wheel Parts has the best customer serivce, and prices, why do we need any other 4 wheel parts stores around!!

Love the look of the Rocker guards, they are a little hard to install not a one man job by no means but can be done I did it. Great product for the money.

Put these on a little more than a month ago and they held up to some nasty rocks I like the Smittybilt products and would recommend these to anyone wanting to protect their body of vehicle.

Was too heavy to install alone .... Looks great and very sturdy!

it was easy to put on took about 30 min on each side look great

These rockers ROCK! Very solid. Mine have taken countless shots only to protect my rig every single time. I would highly recommend!

The only thing I don't like about the sliders is that I think there should be one more bolt in the rear of each slider in the corner.

Just got them installed, very easy to install but a must have!!!!! Is the professional nutsert tool,you can google it and find them on the internet for cheap,cause what they send you to use is junk!!!!. Do yourself a favor and get one, especially if you are doing xrc rear fenders cause they use nutserts,front fenders use 1 or 2 nutserts but I didn't install them cause the fender isn't going anywhere,plus I didn't have the tool to do it at the time

Bought these to complement a set of corner guards I bought a couple years ago. Installation instructions are pretty straightforward. I loosened the body mounts on the affected side, then mocked up the slider with some 6" C-Clamps to mark the locations to drill. Once drilled, I attached the slider with the supplied stainless hardware. The first slider went on smoothly. On the second side, the procedure was repeated. The second fastener froze together with the nut about halfway down the bolt. I tried loosening the nut but it was frozen. Upon trying again, the bolt broke in two. Continuing the job, the next fastener froze. Since this one had made it almost all the way down, I left it and continued. The next few attached without problems. The last fastener froze even before the threads reached the Nylock portion of the nut. I tried to loosen it, and the Allen head of the screw stripped. I was concerned about cutting the fastener, as the Jeep had just been painted following a 3-year-long rebuild. I called 4WD for assistance, and they referred me to Smittybilt. The first Smittybilt rep listened to my problem, then said they could ship a replacement hardware pack "from Dallas". After waiting a couple weeks, I called Smittybilt for an update. The (different) rep told me that they didn't ship from Dallas at all, and told me that they would ship a hardware pack via UPS Blue and e-mail me a tracking number. The next day, I had not received a tracking number so I called 4WD to see if they could intervene. The 4WD rep attempted to contact Smittybilt and was unable to connect while we were on the phone. She said that she would e-mail Smittybilt and send me a tracking number that evening. Morning comes and still no update. I found a 4WD related bulletin board and posted my experience there. Within a day, a 4WD employee answered my post and has taken steps to correct the problem - I bought replacement hardware at a local fastener dealer, and sent 4WD a receipt. I have been told that a refund for the fasteners will arrive in the next few days. Afterwards, the hardware pack from Smittybilt finally arrived. The finish quality of the replacement fasteners is noticeably inferior to that of the replacements I purchased, and also to the finish of the XRC corner guards I purchased a couple years ago. The employee at the fastener store advised me to use copper anti-seize on the replacement fasteners. TL;DR Supplied bolts are prone to galling, be sure and use copper anti-seize on each. If there is a problem, getting support will delay your installation by weeks.

Bought this more for the look than anything. Looks great but instead of the "xrc" cut out it had an oval "xrc" badge. Not as nice looking as the cut out in my opinion. Installation has rough. Had to drill 32 half inch holes. Then the rivet-nut are impossible with the tool provided. Spent just as much on tools for the install. Love the look though. Worth all the work it took in my opinion.

It surely is labor intensive. It helps to have an extra set of hands and a good set of tools. Double check your wiring inside the Jeep before you drill.