Part Number: S/B2802
We Pay the Sales Tax - Memorial Day Sale Weekend At 4WP!
Lowest Price! Guaranteed!
Qualifies for Free Shipping
great design, good finish, perfect fit,packaged very good ( no damage) installed on a 2003 TJ with 1" body lift, supporting a smitty built h20 10000lb winch.
this plate is excellent. i have a Smittybilt SRC front bumper and this raised winch plate put the roller fairlead high enough to clear the bumper. i couldn't have asked for a better fit.
Fairlead cleared my tubular bumper.Winch plate is made from 1/4 inch plate which is better because 3/8 would have been overkill and heavy.Bolted up with no problem.
I wish it would accept the factory tow hooks.
EASY INSTALL,FITS PERFECT. LOOKS AND WORKS FLAWLESS!!!
Like it
I Mounted this on a 98 TJ stock bumper with a Smittybilt XRC8. the mount installed perfect, you can still use your stock sway bar with NO issues, and the fairlead is above the bumper but does stick out past the bumper about 1 Inch. I do recommend putting the winch together first, hooking the electrical connection up, then putting the winch on the mount, then bolting the mount down, if i would have done it this way the first time then install time would be about an hour. My next upgrade, Smittybilt Front bumper
This is a very sturdy and sharp looking winch plate. I have had several comments in the few times I have been out on the trail about how good it looks and how well it supports the winch. Thanks for another great product.
Very happy with this mount,attach to garage floor with Warn 8000 winch.Very happen with this also can remove & attach to a vehicle later.Yes I would rec this to a friend.
This winch plate is perfect for a tubular front bumper.
Very nice product. Bolted right up to the stock bumper no problem. Looks great!
The only thing I don't like about it is NOTHING its perfect and it looks a whole lot better than a flat winch plate
Great design-- Allows you to attach the winch to the plate before attaching to the bumper/frame on the jeep. Very heavy duty.
This product is a good value. It fit my TJ 2004 jeep perfect. Would recommend. Big E
I needed a winch, but wanted to stick with the factory front bumper as it's much lighter than an aftermarket part. Of course this means you have to come up with a way to bolt it down. The normal, flat winch plates are functional, but raising the winch an inch or two leaves more room for the fairlead and gets it winch above the swaybar. Everything about the install was simple and it fits perfect. It's a stout chunk of steel with solidly welded webs and leaves nothing to be desired. If you're putting a winch on your stock bumper, get this plate.
I was absolutely shocked to see a product from Smittybilt that was so well thought out. I've had a number of Smittybilt products in the past (all steel products, as I don't really trust anything electronic/mechanical from them) and I've yet to be genuinely impressed with the quality. My steel corners, rock sliders and 3" flares are all nice, but the fitment was a bit rough at times and the supplied texture coat chips off very easily which promotes premature rust. That said, the SB2802 winch plate is leaps and bounds superior. I was amazed to see the product is actually powdercoated. The coating is thick and heavy and very durable. It seems to be slightly rubberized as well, which adds to the long term durability of the plate, especially in regular used. I was also pleasantly surprised to see they included crush sleeves for the swaybar mount bolts, that way the plate stays level when you torque down the bolts. This product has rejuvenated my interest and faith in the Smittybilt line, as I was beginning to lose hope. My Warn winch mounted to it without issue and all is well and wonderful in the world! Thanks 4wd & Smittybilt, this is an excellent product!
This winch plate is really have duty and I love that it lifts the fairlead off the bumper.
Impressive product. Well built and easy to install. Shipping and service was great
Winch plate looks great, intalled easily. Only problem is the hardware supplied did not fit my TJ, had to reuse the factory hardware.
Join our mailing list to receive information on new products, special events, discounts and more!
Sign up to receive deals by email!
Sign up to receive text alerts about new product releases, exclusive access to sales, and much more!
Sign up to receive deals by text!
By submitting, you agree to receive recurring autodialed marketing text msgs (e.g. cart reminders) to the mobile number used at opt-in from 4 Wheel Parts (4WP) on 21208. Consent is not a condition of purchase. Msg frequency may vary. Msg & data rates may apply. Reply HELP for help and STOP to cancel. See Terms and Conditions & Privacy Policy